diff mbox series

[net-next,v5,13/15] arm: qcom: dt: Add Switch LED for each port for rb3011

Message ID 20230319191814.22067-14-ansuelsmth@gmail.com (mailing list archive)
State New, archived
Headers show
Series net: Add basic LED support for switch/phy | expand

Commit Message

Christian Marangi March 19, 2023, 7:18 p.m. UTC
Add Switch LED for each port for MikroTik RB3011UiAS-RM.

MikroTik RB3011UiAS-RM is a 10 port device with 2 qca8337 switch chips
connected.

It was discovered that in the hardware design all 3 Switch LED trace of
the related port is connected to the same LED. This was discovered by
setting to 'always on' the related led in the switch regs and noticing
that all 3 LED for the specific port (for example for port 1) cause the
connected LED for port 1 to turn on. As an extra test we tried enabling
2 different LED for the port resulting in the LED turned off only if
every led in the reg was off.

Aside from this funny and strange hardware implementation, the device
itself have one green LED for each port, resulting in 10 green LED one
for each of the 10 supported port.

Cc: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 120 ++++++++++++++++++++++
 1 file changed, 120 insertions(+)

Comments

Pavel Machek March 23, 2023, noon UTC | #1
On Sun 2023-03-19 20:18:12, Christian Marangi wrote:
> Add Switch LED for each port for MikroTik RB3011UiAS-RM.
> 
> MikroTik RB3011UiAS-RM is a 10 port device with 2 qca8337 switch chips
> connected.
> 
> It was discovered that in the hardware design all 3 Switch LED trace of
> the related port is connected to the same LED. This was discovered by
> setting to 'always on' the related led in the switch regs and noticing
> that all 3 LED for the specific port (for example for port 1) cause the
> connected LED for port 1 to turn on. As an extra test we tried enabling
> 2 different LED for the port resulting in the LED turned off only if
> every led in the reg was off.
> 
> Aside from this funny and strange hardware implementation, the device
> itself have one green LED for each port, resulting in 10 green LED one
> for each of the 10 supported port.
> 
> Cc: Jonathan McDowell <noodles@earth.li>
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

Reviewed-by: Pavel Machek <pavel@ucw.cz>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index 47a5d1849c72..472b5a2912a1 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -65,26 +65,86 @@  fixed-link {
 				port@1 {
 					reg = <1>;
 					label = "sw1";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <1>;
+						};
+					};
 				};
 
 				port@2 {
 					reg = <2>;
 					label = "sw2";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <2>;
+						};
+					};
 				};
 
 				port@3 {
 					reg = <3>;
 					label = "sw3";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <3>;
+						};
+					};
 				};
 
 				port@4 {
 					reg = <4>;
 					label = "sw4";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <4>;
+						};
+					};
 				};
 
 				port@5 {
 					reg = <5>;
 					label = "sw5";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <5>;
+						};
+					};
 				};
 			};
 		};
@@ -130,26 +190,86 @@  fixed-link {
 				port@1 {
 					reg = <1>;
 					label = "sw6";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <6>;
+						};
+					};
 				};
 
 				port@2 {
 					reg = <2>;
 					label = "sw7";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <7>;
+						};
+					};
 				};
 
 				port@3 {
 					reg = <3>;
 					label = "sw8";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <8>;
+						};
+					};
 				};
 
 				port@4 {
 					reg = <4>;
 					label = "sw9";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <9>;
+						};
+					};
 				};
 
 				port@5 {
 					reg = <5>;
 					label = "sw10";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <10>;
+						};
+					};
 				};
 			};
 		};