diff mbox series

[net-next,v6,12/16] dt-bindings: net: dsa: qca8k: add LEDs definition example

Message ID 20230327141031.11904-13-ansuelsmth@gmail.com (mailing list archive)
State New, archived
Headers show
Series net: Add basic LED support for switch/phy | expand

Commit Message

Christian Marangi March 27, 2023, 2:10 p.m. UTC
Add LEDs definition example for qca8k Switch Family to describe how they
should be defined for a correct usage.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 .../devicetree/bindings/net/dsa/qca8k.yaml    | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

Comments

Rob Herring (Arm) April 6, 2023, 2:10 p.m. UTC | #1
On Mon, Mar 27, 2023 at 04:10:27PM +0200, Christian Marangi wrote:
> Add LEDs definition example for qca8k Switch Family to describe how they
> should be defined for a correct usage.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
>  .../devicetree/bindings/net/dsa/qca8k.yaml    | 24 +++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> index 389892592aac..ad354864187a 100644
> --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> @@ -18,6 +18,8 @@ description:
>    PHY it is connected to. In this config, an internal mdio-bus is registered and
>    the MDIO master is used for communication. Mixed external and internal
>    mdio-bus configurations are not supported by the hardware.
> +  Each phy has at most 3 LEDs connected and can be declared
> +  using the standard LEDs structure.
>  
>  properties:
>    compatible:
> @@ -117,6 +119,7 @@ unevaluatedProperties: false
>  examples:
>    - |
>      #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/leds/common.h>
>  
>      mdio {
>          #address-cells = <1>;
> @@ -226,6 +229,27 @@ examples:
>                      label = "lan1";
>                      phy-mode = "internal";
>                      phy-handle = <&internal_phy_port1>;
> +
> +                    leds {
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +
> +                        led@0 {
> +                            reg = <0>;
> +                            color = <LED_COLOR_ID_WHITE>;
> +                            function = LED_FUNCTION_LAN;
> +                            function-enumerator = <1>;
> +                            default-state = "keep";
> +                        };
> +
> +                        led@1 {
> +                            reg = <1>;
> +                            color = <LED_COLOR_ID_AMBER>;
> +                            function = LED_FUNCTION_LAN;
> +                            function-enumerator = <1>;

Isn't function-enumerator supposed to be unique within a given 
'function'?

> +                            default-state = "keep";
> +                        };
> +                    };
>                  };
>  
>                  port@2 {
> -- 
> 2.39.2
>
Christian Marangi April 12, 2023, 10:42 p.m. UTC | #2
On Thu, Apr 06, 2023 at 09:10:18AM -0500, Rob Herring wrote:
> On Mon, Mar 27, 2023 at 04:10:27PM +0200, Christian Marangi wrote:
> > Add LEDs definition example for qca8k Switch Family to describe how they
> > should be defined for a correct usage.
> > 
> > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> > ---
> >  .../devicetree/bindings/net/dsa/qca8k.yaml    | 24 +++++++++++++++++++
> >  1 file changed, 24 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> > index 389892592aac..ad354864187a 100644
> > --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> > +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> > @@ -18,6 +18,8 @@ description:
> >    PHY it is connected to. In this config, an internal mdio-bus is registered and
> >    the MDIO master is used for communication. Mixed external and internal
> >    mdio-bus configurations are not supported by the hardware.
> > +  Each phy has at most 3 LEDs connected and can be declared
> > +  using the standard LEDs structure.
> >  
> >  properties:
> >    compatible:
> > @@ -117,6 +119,7 @@ unevaluatedProperties: false
> >  examples:
> >    - |
> >      #include <dt-bindings/gpio/gpio.h>
> > +    #include <dt-bindings/leds/common.h>
> >  
> >      mdio {
> >          #address-cells = <1>;
> > @@ -226,6 +229,27 @@ examples:
> >                      label = "lan1";
> >                      phy-mode = "internal";
> >                      phy-handle = <&internal_phy_port1>;
> > +
> > +                    leds {
> > +                        #address-cells = <1>;
> > +                        #size-cells = <0>;
> > +
> > +                        led@0 {
> > +                            reg = <0>;
> > +                            color = <LED_COLOR_ID_WHITE>;
> > +                            function = LED_FUNCTION_LAN;
> > +                            function-enumerator = <1>;
> > +                            default-state = "keep";
> > +                        };
> > +
> > +                        led@1 {
> > +                            reg = <1>;
> > +                            color = <LED_COLOR_ID_AMBER>;
> > +                            function = LED_FUNCTION_LAN;
> > +                            function-enumerator = <1>;
> 
> Isn't function-enumerator supposed to be unique within a given 
> 'function'?
>

In the following example the output would be:
- amber:lan-1
- white:lan-1

So in theory it's unique for the same color and function. Is it
acceptable? Seems sane that there may be multiple color for the same
function (and enum)

> > +                            default-state = "keep";
> > +                        };
> > +                    };
> >                  };
> >  
> >                  port@2 {
> > -- 
> > 2.39.2
> >
Andrew Lunn April 13, 2023, 1:49 p.m. UTC | #3
> > >  examples:
> > >    - |
> > >      #include <dt-bindings/gpio/gpio.h>
> > > +    #include <dt-bindings/leds/common.h>
> > >  
> > >      mdio {
> > >          #address-cells = <1>;
> > > @@ -226,6 +229,27 @@ examples:
> > >                      label = "lan1";
> > >                      phy-mode = "internal";
> > >                      phy-handle = <&internal_phy_port1>;
> > > +
> > > +                    leds {
> > > +                        #address-cells = <1>;
> > > +                        #size-cells = <0>;
> > > +
> > > +                        led@0 {
> > > +                            reg = <0>;
> > > +                            color = <LED_COLOR_ID_WHITE>;
> > > +                            function = LED_FUNCTION_LAN;
> > > +                            function-enumerator = <1>;
> > > +                            default-state = "keep";
> > > +                        };
> > > +
> > > +                        led@1 {
> > > +                            reg = <1>;
> > > +                            color = <LED_COLOR_ID_AMBER>;
> > > +                            function = LED_FUNCTION_LAN;
> > > +                            function-enumerator = <1>;
> > 
> > Isn't function-enumerator supposed to be unique within a given 
> > 'function'?
> >
> 
> In the following example the output would be:
> - amber:lan-1
> - white:lan-1
> 
> So in theory it's unique for the same color and function. Is it
> acceptable? Seems sane that there may be multiple color for the same
> function (and enum)

But what does the -1 actually mean?

At Pavel's request, i documented 'good' names for these LEDs. I
suggested that if there are multiple LEDs for one MAC/PHY, you use
something like 'left' or 'right' to indicate their position on the
RJ45 socket. That has a clear meaning.

     Andrew
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index 389892592aac..ad354864187a 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -18,6 +18,8 @@  description:
   PHY it is connected to. In this config, an internal mdio-bus is registered and
   the MDIO master is used for communication. Mixed external and internal
   mdio-bus configurations are not supported by the hardware.
+  Each phy has at most 3 LEDs connected and can be declared
+  using the standard LEDs structure.
 
 properties:
   compatible:
@@ -117,6 +119,7 @@  unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
 
     mdio {
         #address-cells = <1>;
@@ -226,6 +229,27 @@  examples:
                     label = "lan1";
                     phy-mode = "internal";
                     phy-handle = <&internal_phy_port1>;
+
+                    leds {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        led@0 {
+                            reg = <0>;
+                            color = <LED_COLOR_ID_WHITE>;
+                            function = LED_FUNCTION_LAN;
+                            function-enumerator = <1>;
+                            default-state = "keep";
+                        };
+
+                        led@1 {
+                            reg = <1>;
+                            color = <LED_COLOR_ID_AMBER>;
+                            function = LED_FUNCTION_LAN;
+                            function-enumerator = <1>;
+                            default-state = "keep";
+                        };
+                    };
                 };
 
                 port@2 {