diff mbox series

[RFC,net-next,05/12] net: dsa: mt7530: remove p5_intf_sel default case from mt7530_setup_port5()

Message ID 20230405203859.391267-6-arinc.unal@arinc9.com (mailing list archive)
State New, archived
Headers show
Series net: dsa: mt7530: fix port 5 phylink, phy muxing, and port 6 | expand

Commit Message

Arınç ÜNAL April 5, 2023, 8:38 p.m. UTC 
From: Arınç ÜNAL <arinc.unal@arinc9.com>

There're two code paths for setting up port 5:

mt7530_setup()
-> mt7530_setup_port5()

mt753x_phylink_mac_config()
-> mt753x_mac_config()
   -> mt7530_mac_config()
      -> mt7530_setup_port5()

On the first code path, priv->p5_intf_sel is either set to
P5_INTF_SEL_PHY_P0 or P5_INTF_SEL_PHY_P4 when mt7530_setup_port5() is run.

On the second code path, priv->p5_intf_sel is set to P5_INTF_SEL_GMAC5 when
mt7530_setup_port5() is run.

Remove this default case which will never run.

Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 drivers/net/dsa/mt7530.c | 5 -----
 1 file changed, 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index fccd59564532..8a47dcb96cdf 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -943,10 +943,6 @@  static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
 		/* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
 		val &= ~MHWTRAP_P5_DIS;
 		break;
-	default:
-		dev_err(ds->dev, "Unsupported p5_intf_sel %d\n",
-			priv->p5_intf_sel);
-		goto unlock_exit;
 	}
 
 	/* Setup RGMII settings */
@@ -980,7 +976,6 @@  static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
 	    priv->p5_intf_sel == P5_INTF_SEL_PHY_P4)
 		priv->p5_interface = interface;
 
-unlock_exit:
 	mutex_unlock(&priv->reg_mutex);
 }