| Message ID | 20230411-topic-straitlagoon_mdss-v5-4-998b4d2f7dd1@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | SM63(50|75) DPU support | expand |
On 23/05/2023 11:34, Rob Herring wrote: > > On Tue, 23 May 2023 09:46:15 +0200, Konrad Dybcio wrote: >> Document the SM6350 MDSS. >> >> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> >> --- >> .../bindings/display/msm/qcom,sm6350-mdss.yaml | 214 +++++++++++++++++++++ >> 1 file changed, 214 insertions(+) >> > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.example.dtb: dsi@ae94000: compatible: 'oneOf' conditional failed, one must be fixed: > ['qcom,sm6350-dsi-ctrl', 'qcom,mdss-dsi-ctrl'] is too long > 'qcom,sm6350-dsi-ctrl' is not one of ['qcom,apq8064-dsi-ctrl', 'qcom,msm8916-dsi-ctrl', 'qcom,msm8953-dsi-ctrl', 'qcom,msm8974-dsi-ctrl', 'qcom,msm8996-dsi-ctrl', 'qcom,msm8998-dsi-ctrl', 'qcom,qcm2290-dsi-ctrl', 'qcom,sc7180-dsi-ctrl', 'qcom,sc7280-dsi-ctrl', 'qcom,sdm660-dsi-ctrl', 'qcom,sdm845-dsi-ctrl', 'qcom,sm6115-dsi-ctrl', 'qcom,sm8150-dsi-ctrl', 'qcom,sm8250-dsi-ctrl', 'qcom,sm8350-dsi-ctrl', 'qcom,sm8450-dsi-ctrl', 'qcom,sm8550-dsi-ctrl'] > 'qcom,sm6350-dsi-ctrl' is not one of ['qcom,dsi-ctrl-6g-qcm2290', 'qcom,mdss-dsi-ctrl'] > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.example.dtb: dsi@ae94000: Unevaluated properties are not allowed ('compatible' was unexpected) > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml It looks as if the patches 1 & 2 were not applied when testing this patch. I can not reproduce this issue locally. Could you please doublecheck it? > > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230411-topic-straitlagoon_mdss-v5-4-998b4d2f7dd1@linaro.org > > The base for the series is generally the latest rc1. A different dependency > should be noted in *this* patch. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit after running the above command yourself. Note > that DT_SCHEMA_FILES can be set to your schema file to speed up checking > your schema. However, it must be unset to test all examples with your schema. >
On 23/05/2023 09:46, Konrad Dybcio wrote: > Document the SM6350 MDSS. > > Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> > --- > .../bindings/display/msm/qcom,sm6350-mdss.yaml | 214 +++++++++++++++++++++ > 1 file changed, 214 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml > new file mode 100644 > index 000000000000..6674040d2172 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml > @@ -0,0 +1,214 @@ > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/msm/qcom,sm6350-mdss.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm SM6350 Display MDSS > + > +maintainers: > + - Krishna Manikandan <quic_mkrishn@quicinc.com> > + > +description: > + SM6350 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks > + like DPU display controller, DSI and DP interfaces etc. > + > +$ref: /schemas/display/msm/mdss-common.yaml# > + > +properties: > + compatible: > + items: Drop items. It's just const. > + - const: qcom,sm6350-mdss > + > + clocks: > + items: > + - description: Display AHB clock from gcc > + - description: Display AXI clock from gcc > + - description: Display core clock > + > + clock-names: > + items: > + - const: iface > + - const: bus > + - const: core > + > + iommus: > + maxItems: 1 > + > + interconnects: > + maxItems: 2 > + > + interconnect-names: > + maxItems: 2 Are you sure you have two interconnects? Example is missing them. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml new file mode 100644 index 000000000000..6674040d2172 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml @@ -0,0 +1,214 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6350-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6350 Display MDSS + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +description: + SM6350 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks + like DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sm6350-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AXI clock from gcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm6350-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm6350-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-10nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm6350.h> + #include <dt-bindings/clock/qcom,gcc-sm6350.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm6350-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x800 0x2>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm6350-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "rot", "lut", "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + assigned-clock-rates = <300000000>, + <19200000>, + <19200000>, + <19200000>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM6350_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM6350_MX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; + }; +...
Document the SM6350 MDSS. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- .../bindings/display/msm/qcom,sm6350-mdss.yaml | 214 +++++++++++++++++++++ 1 file changed, 214 insertions(+)