diff mbox series

[v5,2/5] dt-bindings: clocks: atmel,at91rm9200-pmc: convert to yaml

Message ID 20230517094119.2894220-3-claudiu.beznea@microchip.com (mailing list archive)
State New, archived
Headers show
Series dt-bindings: clocks: at91: convert to yaml | expand

Commit Message

Claudiu Beznea May 17, 2023, 9:41 a.m. UTC
Convert Atmel PMC documentation to yaml. Along with it clock names
were adapted according to the current available device trees as
different controller versions accept different clock (some of them
have 3 clocks as input, some has 2 clocks as inputs and some with 2
input clocks uses different clock names).

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 .../devicetree/bindings/clock/at91-clock.txt  |  28 ----
 .../bindings/clock/atmel,at91rm9200-pmc.yaml  | 154 ++++++++++++++++++
 2 files changed, 154 insertions(+), 28 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml

Comments

Conor Dooley May 17, 2023, 12:42 p.m. UTC | #1
On Wed, May 17, 2023 at 12:41:16PM +0300, Claudiu Beznea wrote:
> Convert Atmel PMC documentation to yaml. Along with it clock names
> were adapted according to the current available device trees as
> different controller versions accept different clock (some of them
> have 3 clocks as input, some has 2 clocks as inputs and some with 2
> input clocks uses different clock names).
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>

Looks good to me now Claudiu, thanks!

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Cheers,
Conor.
Krzysztof Kozlowski May 17, 2023, 2:21 p.m. UTC | #2
On 17/05/2023 11:41, Claudiu Beznea wrote:
> Convert Atmel PMC documentation to yaml. Along with it clock names
> were adapted according to the current available device trees as
> different controller versions accept different clock (some of them
> have 3 clocks as input, some has 2 clocks as inputs and some with 2
> input clocks uses different clock names).

Thank you for your patch. There is something to discuss/improve.


> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - atmel,at91rm9200-pmc
> +              - atmel,at91sam9260-pmc
> +              - atmel,at91sam9g20-pmc
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 2
> +          maxItems: 2
> +        clock-names:
> +          items:
> +            - const: slow_xtal
> +            - const: main_xtal
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - atmel,sama5d2-pmc
> +              - atmel,sama5d3-pmc
> +              - atmel,sama5d4-pmc
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 2
> +          maxItems: 2
> +        clock-names:
> +          items:
> +            - const: slow_clk
> +            - const: main_xtal

This and previous if, should be squashed. You have exactly the same then:.



Best regards,
Krzysztof
Claudiu Beznea May 18, 2023, 6:03 a.m. UTC | #3
On 17.05.2023 17:21, Krzysztof Kozlowski wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On 17/05/2023 11:41, Claudiu Beznea wrote:
>> Convert Atmel PMC documentation to yaml. Along with it clock names
>> were adapted according to the current available device trees as
>> different controller versions accept different clock (some of them
>> have 3 clocks as input, some has 2 clocks as inputs and some with 2
>> input clocks uses different clock names).
> 
> Thank you for your patch. There is something to discuss/improve.
> 
> 
>> +
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - atmel,at91rm9200-pmc
>> +              - atmel,at91sam9260-pmc
>> +              - atmel,at91sam9g20-pmc
>> +    then:
>> +      properties:
>> +        clocks:
>> +          minItems: 2
>> +          maxItems: 2
>> +        clock-names:
>> +          items:
>> +            - const: slow_xtal
>> +            - const: main_xtal
>> +
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - atmel,sama5d2-pmc
>> +              - atmel,sama5d3-pmc
>> +              - atmel,sama5d4-pmc
>> +    then:
>> +      properties:
>> +        clocks:
>> +          minItems: 2
>> +          maxItems: 2
>> +        clock-names:
>> +          items:
>> +            - const: slow_clk
>> +            - const: main_xtal
> 
> This and previous if, should be squashed. You have exactly the same then:.

Clock names are different. Or do you propose to have a if for
clocks:
  minItems: 2
  maxItems: 2

and 2 ifs for clock names?

> 
> 
> 
> Best regards,
> Krzysztof
>
Krzysztof Kozlowski May 18, 2023, 7:05 a.m. UTC | #4
On 18/05/2023 08:03, Claudiu.Beznea@microchip.com wrote:
> On 17.05.2023 17:21, Krzysztof Kozlowski wrote:
>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>
>> On 17/05/2023 11:41, Claudiu Beznea wrote:
>>> Convert Atmel PMC documentation to yaml. Along with it clock names
>>> were adapted according to the current available device trees as
>>> different controller versions accept different clock (some of them
>>> have 3 clocks as input, some has 2 clocks as inputs and some with 2
>>> input clocks uses different clock names).
>>
>> Thank you for your patch. There is something to discuss/improve.
>>
>>
>>> +
>>> +  - if:
>>> +      properties:
>>> +        compatible:
>>> +          contains:
>>> +            enum:
>>> +              - atmel,at91rm9200-pmc
>>> +              - atmel,at91sam9260-pmc
>>> +              - atmel,at91sam9g20-pmc
>>> +    then:
>>> +      properties:
>>> +        clocks:
>>> +          minItems: 2
>>> +          maxItems: 2
>>> +        clock-names:
>>> +          items:
>>> +            - const: slow_xtal
>>> +            - const: main_xtal
>>> +
>>> +  - if:
>>> +      properties:
>>> +        compatible:
>>> +          contains:
>>> +            enum:
>>> +              - atmel,sama5d2-pmc
>>> +              - atmel,sama5d3-pmc
>>> +              - atmel,sama5d4-pmc
>>> +    then:
>>> +      properties:
>>> +        clocks:
>>> +          minItems: 2
>>> +          maxItems: 2
>>> +        clock-names:
>>> +          items:
>>> +            - const: slow_clk
>>> +            - const: main_xtal
>>
>> This and previous if, should be squashed. You have exactly the same then:.
> 
> Clock names are different. Or do you propose to have a if for
> clocks:
>   minItems: 2
>   maxItems: 2
> 
> and 2 ifs for clock names?

Ah, I see, they have different names - xtal -> clk.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index 13f45db3b66d..57394785d3b0 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -28,31 +28,3 @@  For example:
 		#clock-cells = <0>;
 	};
 
-Power Management Controller (PMC):
-
-Required properties:
-- compatible : shall be "atmel,<chip>-pmc", "syscon" or
-	"microchip,sam9x60-pmc"
-	<chip> can be: at91rm9200, at91sam9260, at91sam9261,
-	at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15,
-	at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5,
-	sama5d2, sama5d3 or sama5d4.
-- #clock-cells : from common clock binding; shall be set to 2. The first entry
-  is the type of the clock (core, system, peripheral or generated) and the
-  second entry its index as provided by the datasheet
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names: Must include the following entries: "slow_clk", "main_xtal"
-
-Optional properties:
-- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
-  provided on XIN.
-
-For example:
-	pmc: pmc@f0018000 {
-		compatible = "atmel,sama5d4-pmc", "syscon";
-		reg = <0xf0018000 0x120>;
-		interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-		#clock-cells = <2>;
-		clocks = <&clk32k>, <&main_xtal>;
-		clock-names = "slow_clk", "main_xtal";
-	};
diff --git a/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
new file mode 100644
index 000000000000..c1bdcd9058ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
@@ -0,0 +1,154 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/atmel,at91rm9200-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Power Management Controller (PMC)
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  The power management controller optimizes power consumption by controlling all
+  system and user peripheral clocks. The PMC enables/disables the clock inputs
+  to many of the peripherals and to the processor.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: atmel,at91sam9g20-pmc
+          - const: atmel,at91sam9260-pmc
+          - const: syscon
+      - items:
+          - enum:
+              - atmel,at91sam9g15-pmc
+              - atmel,at91sam9g25-pmc
+              - atmel,at91sam9g35-pmc
+              - atmel,at91sam9x25-pmc
+              - atmel,at91sam9x35-pmc
+          - const: atmel,at91sam9x5-pmc
+          - const: syscon
+      - items:
+          - enum:
+              - atmel,at91rm9200-pmc
+              - atmel,at91sam9260-pmc
+              - atmel,at91sam9g45-pmc
+              - atmel,at91sam9n12-pmc
+              - atmel,at91sam9rl-pmc
+              - atmel,at91sam9x5-pmc
+              - atmel,sama5d2-pmc
+              - atmel,sama5d3-pmc
+              - atmel,sama5d4-pmc
+              - microchip,sam9x60-pmc
+              - microchip,sama7g5-pmc
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#clock-cells":
+    description: |
+      - 1st cell is the clock type, one of PMC_TYPE_CORE, PMC_TYPE_SYSTEM,
+        PMC_TYPE_PERIPHERAL, PMC_TYPE_GCK, PMC_TYPE_PROGRAMMABLE (as defined
+        in <dt-bindings/clock/at91.h>)
+      - 2nd cell is the clock identifier as defined in <dt-bindings/clock/at91.h
+        (for core clocks) or as defined in datasheet (for system, peripheral,
+        gck and programmable clocks).
+    const: 2
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  atmel,osc-bypass:
+    description: set when a clock signal is directly provided on XIN
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,sam9x60-pmc
+              - microchip,sama7g5-pmc
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: td_slck
+            - const: md_slck
+            - const: main_xtal
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - atmel,at91rm9200-pmc
+              - atmel,at91sam9260-pmc
+              - atmel,at91sam9g20-pmc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: slow_xtal
+            - const: main_xtal
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - atmel,sama5d2-pmc
+              - atmel,sama5d3-pmc
+              - atmel,sama5d4-pmc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: slow_clk
+            - const: main_xtal
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmc: clock-controller@f0018000 {
+        compatible = "atmel,sama5d4-pmc", "syscon";
+        reg = <0xf0018000 0x120>;
+        interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+        #clock-cells = <2>;
+        clocks = <&clk32k>, <&main_xtal>;
+        clock-names = "slow_clk", "main_xtal";
+    };
+
+...