@@ -909,13 +909,6 @@ L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/altera/
-ALTERA TSE PCS
-M: Maxime Chevallier <maxime.chevallier@bootlin.com>
-L: netdev@vger.kernel.org
-S: Supported
-F: drivers/net/pcs/pcs-altera-tse.c
-F: include/linux/pcs-altera-tse.h
-
ALTERA UART/JTAG UART SERIAL DRIVERS
M: Tobias Klauser <tklauser@distanz.ch>
L: linux-serial@vger.kernel.org
@@ -33,10 +33,4 @@ config PCS_RZN1_MIIC
on RZ/N1 SoCs. This PCS converts MII to RMII/RGMII or can be set in
pass-through mode for MII.
-config PCS_ALTERA_TSE
- tristate
- help
- This module provides helper functions for the Altera Triple Speed
- Ethernet SGMII PCS, that can be found on the Intel Socfpga family.
-
endmenu
@@ -7,4 +7,3 @@ obj-$(CONFIG_PCS_XPCS) += pcs_xpcs.o
obj-$(CONFIG_PCS_LYNX) += pcs-lynx.o
obj-$(CONFIG_PCS_MTK_LYNXI) += pcs-mtk-lynxi.o
obj-$(CONFIG_PCS_RZN1_MIIC) += pcs-rzn1-miic.o
-obj-$(CONFIG_PCS_ALTERA_TSE) += pcs-altera-tse.o
deleted file mode 100644
@@ -1,160 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2022 Bootlin
- *
- * Maxime Chevallier <maxime.chevallier@bootlin.com>
- */
-
-#include <linux/netdevice.h>
-#include <linux/phy.h>
-#include <linux/phylink.h>
-#include <linux/pcs-altera-tse.h>
-
-/* SGMII PCS register addresses
- */
-#define SGMII_PCS_LINK_TIMER_0 0x12
-#define SGMII_PCS_LINK_TIMER_1 0x13
-#define SGMII_PCS_IF_MODE 0x14
-#define PCS_IF_MODE_SGMII_ENA BIT(0)
-#define PCS_IF_MODE_USE_SGMII_AN BIT(1)
-#define PCS_IF_MODE_SGMI_HALF_DUPLEX BIT(4)
-#define PCS_IF_MODE_SGMI_PHY_AN BIT(5)
-#define SGMII_PCS_SW_RESET_TIMEOUT 100 /* usecs */
-
-struct altera_tse_pcs {
- struct phylink_pcs pcs;
- void __iomem *base;
- int reg_width;
-};
-
-static struct altera_tse_pcs *phylink_pcs_to_tse_pcs(struct phylink_pcs *pcs)
-{
- return container_of(pcs, struct altera_tse_pcs, pcs);
-}
-
-static u16 tse_pcs_read(struct altera_tse_pcs *tse_pcs, int regnum)
-{
- if (tse_pcs->reg_width == 4)
- return readl(tse_pcs->base + regnum * 4);
- else
- return readw(tse_pcs->base + regnum * 2);
-}
-
-static void tse_pcs_write(struct altera_tse_pcs *tse_pcs, int regnum,
- u16 value)
-{
- if (tse_pcs->reg_width == 4)
- writel(value, tse_pcs->base + regnum * 4);
- else
- writew(value, tse_pcs->base + regnum * 2);
-}
-
-static int tse_pcs_reset(struct altera_tse_pcs *tse_pcs)
-{
- u16 bmcr;
-
- /* Reset PCS block */
- bmcr = tse_pcs_read(tse_pcs, MII_BMCR);
- bmcr |= BMCR_RESET;
- tse_pcs_write(tse_pcs, MII_BMCR, bmcr);
-
- return read_poll_timeout(tse_pcs_read, bmcr, (bmcr & BMCR_RESET),
- 10, SGMII_PCS_SW_RESET_TIMEOUT, 1,
- tse_pcs, MII_BMCR);
-}
-
-static int alt_tse_pcs_validate(struct phylink_pcs *pcs,
- unsigned long *supported,
- const struct phylink_link_state *state)
-{
- if (state->interface == PHY_INTERFACE_MODE_SGMII ||
- state->interface == PHY_INTERFACE_MODE_1000BASEX)
- return 1;
-
- return -EINVAL;
-}
-
-static int alt_tse_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
- phy_interface_t interface,
- const unsigned long *advertising,
- bool permit_pause_to_mac)
-{
- struct altera_tse_pcs *tse_pcs = phylink_pcs_to_tse_pcs(pcs);
- u32 ctrl, if_mode;
-
- ctrl = tse_pcs_read(tse_pcs, MII_BMCR);
- if_mode = tse_pcs_read(tse_pcs, SGMII_PCS_IF_MODE);
-
- /* Set link timer to 1.6ms, as per the MegaCore Function User Guide */
- tse_pcs_write(tse_pcs, SGMII_PCS_LINK_TIMER_0, 0x0D40);
- tse_pcs_write(tse_pcs, SGMII_PCS_LINK_TIMER_1, 0x03);
-
- if (interface == PHY_INTERFACE_MODE_SGMII) {
- if_mode |= PCS_IF_MODE_USE_SGMII_AN | PCS_IF_MODE_SGMII_ENA;
- } else if (interface == PHY_INTERFACE_MODE_1000BASEX) {
- if_mode &= ~(PCS_IF_MODE_USE_SGMII_AN | PCS_IF_MODE_SGMII_ENA);
- }
-
- ctrl |= (BMCR_SPEED1000 | BMCR_FULLDPLX | BMCR_ANENABLE);
-
- tse_pcs_write(tse_pcs, MII_BMCR, ctrl);
- tse_pcs_write(tse_pcs, SGMII_PCS_IF_MODE, if_mode);
-
- return tse_pcs_reset(tse_pcs);
-}
-
-static void alt_tse_pcs_get_state(struct phylink_pcs *pcs,
- struct phylink_link_state *state)
-{
- struct altera_tse_pcs *tse_pcs = phylink_pcs_to_tse_pcs(pcs);
- u16 bmsr, lpa;
-
- bmsr = tse_pcs_read(tse_pcs, MII_BMSR);
- lpa = tse_pcs_read(tse_pcs, MII_LPA);
-
- phylink_mii_c22_pcs_decode_state(state, bmsr, lpa);
-}
-
-static void alt_tse_pcs_an_restart(struct phylink_pcs *pcs)
-{
- struct altera_tse_pcs *tse_pcs = phylink_pcs_to_tse_pcs(pcs);
- u16 bmcr;
-
- bmcr = tse_pcs_read(tse_pcs, MII_BMCR);
- bmcr |= BMCR_ANRESTART;
- tse_pcs_write(tse_pcs, MII_BMCR, bmcr);
-
- /* This PCS seems to require a soft reset to re-sync the AN logic */
- tse_pcs_reset(tse_pcs);
-}
-
-static const struct phylink_pcs_ops alt_tse_pcs_ops = {
- .pcs_validate = alt_tse_pcs_validate,
- .pcs_get_state = alt_tse_pcs_get_state,
- .pcs_config = alt_tse_pcs_config,
- .pcs_an_restart = alt_tse_pcs_an_restart,
-};
-
-struct phylink_pcs *alt_tse_pcs_create(struct net_device *ndev,
- void __iomem *pcs_base, int reg_width)
-{
- struct altera_tse_pcs *tse_pcs;
-
- if (reg_width != 4 && reg_width != 2)
- return ERR_PTR(-EINVAL);
-
- tse_pcs = devm_kzalloc(&ndev->dev, sizeof(*tse_pcs), GFP_KERNEL);
- if (!tse_pcs)
- return ERR_PTR(-ENOMEM);
-
- tse_pcs->pcs.ops = &alt_tse_pcs_ops;
- tse_pcs->base = pcs_base;
- tse_pcs->reg_width = reg_width;
-
- return &tse_pcs->pcs;
-}
-EXPORT_SYMBOL_GPL(alt_tse_pcs_create);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Altera TSE PCS driver");
-MODULE_AUTHOR("Maxime Chevallier <maxime.chevallier@bootlin.com>");
deleted file mode 100644
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2022 Bootlin
- *
- * Maxime Chevallier <maxime.chevallier@bootlin.com>
- */
-
-#ifndef __LINUX_PCS_ALTERA_TSE_H
-#define __LINUX_PCS_ALTERA_TSE_H
-
-struct phylink_pcs;
-struct net_device;
-
-struct phylink_pcs *alt_tse_pcs_create(struct net_device *ndev,
- void __iomem *pcs_base, int reg_width);
-
-#endif /* __LINUX_PCS_ALTERA_TSE_H */
Now that we can easily create a mdio-device that represents a memory-mapped device that exposes an MDIO-like register layout, we don't need the Altera TSE PCS anymore, since we can use the Lynx PCS instead. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- V2->V3 : No changes V1->V2 : No changes MAINTAINERS | 7 -- drivers/net/pcs/Kconfig | 6 -- drivers/net/pcs/Makefile | 1 - drivers/net/pcs/pcs-altera-tse.c | 160 ------------------------------- include/linux/pcs-altera-tse.h | 17 ---- 5 files changed, 191 deletions(-) delete mode 100644 drivers/net/pcs/pcs-altera-tse.c delete mode 100644 include/linux/pcs-altera-tse.h