@@ -14,6 +14,67 @@ / {
compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
"avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
"fsl,imx8mp";
+
+ reg_vcc_3v3_audio: 3v3-audio-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3_AUD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_vcc_1v8_audio: 1v8-audio-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8_AUD";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sgtl5000-audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&codec_dai>;
+ simple-audio-card,bitclock-master = <&codec_dai>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+
+ codec_dai: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ };
+ };
+};
+
+&i2c1 {
+ sgtl5000: audio-codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+
+ assigned-clocks = <&clk IMX8MP_CLK_CLKOUT1_SEL>;
+ assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+ assigned-clock-rates = <24000000>;
+ clocks = <&clk IMX8MP_CLK_CLKOUT1>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+
+ VDDA-supply = <®_vcc_3v3_audio>;
+ VDDD-supply = <®_vcc_1v8_audio>;
+ VDDIO-supply = <®_vcc_1v8_audio>;
+ };
+};
+
+/* I2S-0 = sai2 */
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+
+ assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
+ assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <12288000>;
+
+ fsl,sai-mclk-direction-output;
+ status = "okay";
};
&flexcan1 {
@@ -32,6 +93,15 @@ &iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_smarc_gpio>;
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6
+ MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6
+ MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0xd6
+ MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6
+ >;
+ };
+
pinctrl_smarc_gpio: smarcgpiosgrp {
fsl,pins =
<MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x19>, /* GPIO0 */
The MSC SM2-MB-EP1 carrier board for the SM2S-IMX8PLUS SMARC module has an NXP SGTL5000 audio codec connected to I2S-0 (sai2). This requires to: * add the power supplies (always on) * enable sai2 with pinmuxes * reparent the CLKOUT1 clock that feeds the codec SYS_MCLK to IMX8MP_CLK_24M in order it to generate an accurate 24 MHz rate Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> --- Changed in v3: - renamed codec node name to "audio-codec" Changed in v2: - switch to simple-audio-card - fix typo in commit message - no underscores in node names - rename "sgtl5000-sound" node to "sound" --- .../dts/freescale/imx8mp-msc-sm2s-ep1.dts | 70 +++++++++++++++++++ 1 file changed, 70 insertions(+) base-commit: b20b0e97fc472249839abdc4d69cffdc695e97aa