diff mbox series

[v7,1/4] arm64: dts: marvell: cp11x: Fix nand_controller node name according to YAML

Message ID 20230530235456.1009082-2-chris.packham@alliedtelesis.co.nz (mailing list archive)
State New, archived
Headers show
Series dt-bindings: mtd: marvell-nand: Add YAML scheme | expand

Commit Message

Chris Packham May 30, 2023, 11:54 p.m. UTC
From: Vadym Kochan <vadym.kochan@plvision.eu>

Marvell NAND controller has now YAML to validate it's DT bindings, so
change the node name of cp11x DTSI as it is required by nand-controller.yaml

Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Miquel Raynal May 31, 2023, 7:35 a.m. UTC | #1
Hi Chris,

chris.packham@alliedtelesis.co.nz wrote on Wed, 31 May 2023 11:54:53
+1200:

> From: Vadym Kochan <vadym.kochan@plvision.eu>
> 
> Marvell NAND controller has now YAML to validate it's DT bindings, so
> change the node name of cp11x DTSI as it is required by nand-controller.yaml
> 
> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

> ---
>  arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> index 0cc9ee9871e7..4ec1aae0a3a9 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> @@ -468,7 +468,7 @@ CP11X_LABEL(uart3): serial@702300 {
>  			status = "disabled";
>  		};
>  
> -		CP11X_LABEL(nand_controller): nand@720000 {
> +		CP11X_LABEL(nand_controller): nand-controller@720000 {
>  			/*
>  			 * Due to the limitation of the pins available
>  			 * this controller is only usable on the CPM


Thanks,
Miquèl
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 0cc9ee9871e7..4ec1aae0a3a9 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -468,7 +468,7 @@  CP11X_LABEL(uart3): serial@702300 {
 			status = "disabled";
 		};
 
-		CP11X_LABEL(nand_controller): nand@720000 {
+		CP11X_LABEL(nand_controller): nand-controller@720000 {
 			/*
 			 * Due to the limitation of the pins available
 			 * this controller is only usable on the CPM