[v2,3/3] clk: imx: imx6sx: Allow passing the LCDIF1 parent via DT

Commit Message

Fabio Estevam June 9, 2023, 3:12 a.m. UTC

It is not a good idea to hardcode the LCDIF1 parent inside the
clock driver because some users may want to use a different clock
parent for LCDIF1. One of the reasons could be related to EMI tests.

Remove the harcoded LCDIF1 parent when the LCDIF1 parent is described
via devicetree.

Old dtb's that do not describe the LCDIF1 parent via devicetree will
use the same PLL5 clock as parent to keep the same behavior.

Signed-off-by: Fabio Estevam <[e-mail]>
---
Changes since v1:
- Check for the presence of 'assigned-clock-parents'. (Stephen)

 drivers/clk/imx/clk-imx6sx.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

Patch

diff --git a/drivers/clk/imx/clk-imx6sx.c b/drivers/clk/imx/clk-imx6sx.c
index 3f1502933e59..69f8f6f9ca49 100644
--- a/drivers/clk/imx/clk-imx6sx.c
+++ b/drivers/clk/imx/clk-imx6sx.c
@@ -121,6 +121,7 @@  static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 {
 	struct device_node *np;
 	void __iomem *base;
+	bool lcdif1_assigned_clk;
 
 	clk_hw_data = kzalloc(struct_size(clk_hw_data, hws,
 					  IMX6SX_CLK_CLK_END), GFP_KERNEL);
@@ -498,9 +499,16 @@  static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	clk_set_parent(hws[IMX6SX_CLK_EIM_SLOW_SEL]->clk, hws[IMX6SX_CLK_PLL2_PFD2]->clk);
 	clk_set_rate(hws[IMX6SX_CLK_EIM_SLOW]->clk, 132000000);
 
-	/* set parent clock for LCDIF1 pixel clock */
-	clk_set_parent(hws[IMX6SX_CLK_LCDIF1_PRE_SEL]->clk, hws[IMX6SX_CLK_PLL5_VIDEO_DIV]->clk);
-	clk_set_parent(hws[IMX6SX_CLK_LCDIF1_SEL]->clk, hws[IMX6SX_CLK_LCDIF1_PODF]->clk);
+	np = of_find_node_by_path("/soc/bus@2200000/spba-bus@2240000/lcdif@2220000");
+	lcdif1_assigned_clk = of_find_property(np, "assigned-clock-parents", NULL);
+
+	/* Set parent clock for LCDIF1 pixel clock if not done via devicetree */
+	if (!lcdif1_assigned_clk) {
+		clk_set_parent(hws[IMX6SX_CLK_LCDIF1_PRE_SEL]->clk,
+			       hws[IMX6SX_CLK_PLL5_VIDEO_DIV]->clk);
+		clk_set_parent(hws[IMX6SX_CLK_LCDIF1_SEL]->clk,
+			       hws[IMX6SX_CLK_LCDIF1_PODF]->clk);
+	}
 
 	/* Set the parent clks of PCIe lvds1 and pcie_axi to be pcie ref, axi */
 	if (clk_set_parent(hws[IMX6SX_CLK_LVDS1_SEL]->clk, hws[IMX6SX_CLK_PCIE_REF_125M]->clk))