diff mbox series

[2/6] dt-bindings: clock: Bindings for Meson T7 clock controller

Message ID 20230615182938.18487-3-tanure@linux.com (mailing list archive)
State New, archived
Headers show
Series Add Amlogic A311D2 and Khadas Vim4 Board Support | expand

Commit Message

Lucas Tanure June 15, 2023, 6:29 p.m. UTC 
Add documentation for T7 the clock controller.

Signed-off-by: Lucas Tanure <tanure@linux.com>
---
 .../bindings/clock/amlogic,mesont7.yaml       |  69 +++
 include/dt-bindings/clock/mesont7-clkc.h      | 487 ++++++++++++++++++
 2 files changed, 556 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
 create mode 100644 include/dt-bindings/clock/mesont7-clkc.h

--
2.41.0

Comments

Rob Herring June 15, 2023, 7:47 p.m. UTC | #1 
On Thu, 15 Jun 2023 19:29:34 +0100, Lucas Tanure wrote:
> Add documentation for T7 the clock controller.
> 
> Signed-off-by: Lucas Tanure <tanure@linux.com>
> ---
>  .../bindings/clock/amlogic,mesont7.yaml       |  69 +++
>  include/dt-bindings/clock/mesont7-clkc.h      | 487 ++++++++++++++++++
>  2 files changed, 556 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
>  create mode 100644 include/dt-bindings/clock/mesont7-clkc.h
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename
 	 $id: http://devicetree.org/schemas/clock/amlogic,mesont7-clk.yaml
 	file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
Documentation/devicetree/bindings/clock/amlogic,mesont7.example.dts:18.32-28.11: Warning (unit_address_vs_reg): /example-0/clock-controller: node has a reg or ranges property, but no unit name
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,mesont7.example.dtb: clock-controller: reg: [[0, 0], [0, 1180], [0, 32768], [0, 800], [0, 57408], [0, 188]] is too long
	from schema $id: http://devicetree.org/schemas/clock/amlogic,mesont7-clk.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230615182938.18487-3-tanure@linux.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Conor Dooley June 15, 2023, 9:41 p.m. UTC | #2 
Hey Lucas,

On Thu, Jun 15, 2023 at 07:29:34PM +0100, Lucas Tanure wrote:
> Add documentation for T7 the clock controller.

Other than the bot's complaint, few comments for ya.

> Signed-off-by: Lucas Tanure <tanure@linux.com>
> ---
>  .../bindings/clock/amlogic,mesont7.yaml       |  69 +++
>  include/dt-bindings/clock/mesont7-clkc.h      | 487 ++++++++++++++++++
>  2 files changed, 556 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
>  create mode 100644 include/dt-bindings/clock/mesont7-clkc.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml b/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
> new file mode 100644
> index 000000000000..18e7cca0c0e1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml

The filename should match the compatible - please test the bindings,
dt_binding_check will complain.

> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/amlogic,mesont7-clk.yaml#

and this should match the filename

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Meson T7 Clock Controller
> +
> +maintainers:
> +  - Lucas Tanure <tanure@linux.com>
> +
> +description: |
> +  The Amlogic Meson T7 clock controller generates and supplies clock to
> +  various peripherals within the SoC.
> +
> +  This binding uses common clock bindings
> +  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt

This doesn't add anything as you're adding a yaml binding. I'd drop it
(and the | from description: since you would no longer have formatting
to preserve).

> +
> +properties:
> +  compatible:
> +    const: amlogic,t7-clkc
> +
> +  reg:
> +    items:
> +      - description: basic registers

What does "basic registers" mean? I think you should be more specific in
your description.

> +      - description: pll registers
> +      - description: cpu_clk registers
> +
> +  reg-names:
> +    items:
> +      - const: basic
> +      - const: pll
> +      - const: cpu_clk
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: xtal
> +
> +  '#clock-cells':
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - clocks
> +  - clock-names
> +  - '#clock-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  # Clock controller node:
> +  - |
> +    clkc: clock-controller {

The comment above and the node name here can be dropped.
You do however need to change "clock-controller" to
"clock-controller@<addr>".

> +        compatible = "amlogic,t7-clkc";
> +        #clock-cells = <1>;
> +        reg = <0x0 0x0000 0x00 0x49c>,
> +              <0x0 0x8000 0x00 0x320>,
> +              <0x0 0xe040 0x00 0x0bc>;

Drop the 0x0 stuff from here.

> +        reg-names = "basic", "pll", "cpu_clk";
> +        clocks = <&xtal>;
> +        clock-names = "xtal";
> +        status = "okay";

status can be dropped, okay is the default.

Cheers,
Conor.
Lucas Tanure June 18, 2023, 5:39 p.m. UTC | #3 
On Thu, Jun 15, 2023 at 10:41 PM Conor Dooley <conor@kernel.org> wrote:
>
> Hey Lucas,
>
> On Thu, Jun 15, 2023 at 07:29:34PM +0100, Lucas Tanure wrote:
> > Add documentation for T7 the clock controller.
>
> Other than the bot's complaint, few comments for ya.
>
> > Signed-off-by: Lucas Tanure <tanure@linux.com>
> > ---
> >  .../bindings/clock/amlogic,mesont7.yaml       |  69 +++
> >  include/dt-bindings/clock/mesont7-clkc.h      | 487 ++++++++++++++++++
> >  2 files changed, 556 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
> >  create mode 100644 include/dt-bindings/clock/mesont7-clkc.h
> >
> > diff --git a/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml b/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
> > new file mode 100644
> > index 000000000000..18e7cca0c0e1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
>
> The filename should match the compatible - please test the bindings,
> dt_binding_check will complain.
>
> > @@ -0,0 +1,69 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/clock/amlogic,mesont7-clk.yaml#
>
> and this should match the filename
>
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Amlogic Meson T7 Clock Controller
> > +
> > +maintainers:
> > +  - Lucas Tanure <tanure@linux.com>
> > +
> > +description: |
> > +  The Amlogic Meson T7 clock controller generates and supplies clock to
> > +  various peripherals within the SoC.
> > +
> > +  This binding uses common clock bindings
> > +  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>
> This doesn't add anything as you're adding a yaml binding. I'd drop it
> (and the | from description: since you would no longer have formatting
> to preserve).
>
> > +
> > +properties:
> > +  compatible:
> > +    const: amlogic,t7-clkc
> > +
> > +  reg:
> > +    items:
> > +      - description: basic registers
>
> What does "basic registers" mean? I think you should be more specific in
> your description.
>
> > +      - description: pll registers
> > +      - description: cpu_clk registers
> > +
> > +  reg-names:
> > +    items:
> > +      - const: basic
> > +      - const: pll
> > +      - const: cpu_clk
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  clock-names:
> > +    const: xtal
> > +
> > +  '#clock-cells':
> > +    const: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reg-names
> > +  - clocks
> > +  - clock-names
> > +  - '#clock-cells'
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  # Clock controller node:
> > +  - |
> > +    clkc: clock-controller {
>
> The comment above and the node name here can be dropped.
> You do however need to change "clock-controller" to
> "clock-controller@<addr>".
>
> > +        compatible = "amlogic,t7-clkc";
> > +        #clock-cells = <1>;
> > +        reg = <0x0 0x0000 0x00 0x49c>,
> > +              <0x0 0x8000 0x00 0x320>,
> > +              <0x0 0xe040 0x00 0x0bc>;
>
> Drop the 0x0 stuff from here.
>
> > +        reg-names = "basic", "pll", "cpu_clk";
> > +        clocks = <&xtal>;
> > +        clock-names = "xtal";
> > +        status = "okay";
>
> status can be dropped, okay is the default.
>
> Cheers,
> Conor.
>
I will drop this patch for now, wait for the S4 clock driver to be
upstreamed, and use that as a base.
Conor Dooley June 18, 2023, 7:16 p.m. UTC | #4 
On Sun, Jun 18, 2023 at 06:39:17PM +0100, Lucas Tanure wrote:
> On Thu, Jun 15, 2023 at 10:41 PM Conor Dooley <conor@kernel.org> wrote:
> >
> > Hey Lucas,
> >
> > On Thu, Jun 15, 2023 at 07:29:34PM +0100, Lucas Tanure wrote:
> > > Add documentation for T7 the clock controller.
> >
> > Other than the bot's complaint, few comments for ya.
> >
> > > Signed-off-by: Lucas Tanure <tanure@linux.com>
> > > ---
> > >  .../bindings/clock/amlogic,mesont7.yaml       |  69 +++
> > >  include/dt-bindings/clock/mesont7-clkc.h      | 487 ++++++++++++++++++
> > >  2 files changed, 556 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
> > >  create mode 100644 include/dt-bindings/clock/mesont7-clkc.h
> > >
> > > diff --git a/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml b/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
> > > new file mode 100644
> > > index 000000000000..18e7cca0c0e1
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
> >
> > The filename should match the compatible - please test the bindings,
> > dt_binding_check will complain.
> >
> > > @@ -0,0 +1,69 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/clock/amlogic,mesont7-clk.yaml#
> >
> > and this should match the filename
> >
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Amlogic Meson T7 Clock Controller
> > > +
> > > +maintainers:
> > > +  - Lucas Tanure <tanure@linux.com>
> > > +
> > > +description: |
> > > +  The Amlogic Meson T7 clock controller generates and supplies clock to
> > > +  various peripherals within the SoC.
> > > +
> > > +  This binding uses common clock bindings
> > > +  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> >
> > This doesn't add anything as you're adding a yaml binding. I'd drop it
> > (and the | from description: since you would no longer have formatting
> > to preserve).
> >
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: amlogic,t7-clkc
> > > +
> > > +  reg:
> > > +    items:
> > > +      - description: basic registers
> >
> > What does "basic registers" mean? I think you should be more specific in
> > your description.
> >
> > > +      - description: pll registers
> > > +      - description: cpu_clk registers
> > > +
> > > +  reg-names:
> > > +    items:
> > > +      - const: basic
> > > +      - const: pll
> > > +      - const: cpu_clk
> > > +
> > > +  clocks:
> > > +    maxItems: 1
> > > +
> > > +  clock-names:
> > > +    const: xtal
> > > +
> > > +  '#clock-cells':
> > > +    const: 1
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - reg-names
> > > +  - clocks
> > > +  - clock-names
> > > +  - '#clock-cells'
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > +  # Clock controller node:
> > > +  - |
> > > +    clkc: clock-controller {
> >
> > The comment above and the node name here can be dropped.
> > You do however need to change "clock-controller" to
> > "clock-controller@<addr>".
> >
> > > +        compatible = "amlogic,t7-clkc";
> > > +        #clock-cells = <1>;
> > > +        reg = <0x0 0x0000 0x00 0x49c>,
> > > +              <0x0 0x8000 0x00 0x320>,
> > > +              <0x0 0xe040 0x00 0x0bc>;
> >
> > Drop the 0x0 stuff from here.
> >
> > > +        reg-names = "basic", "pll", "cpu_clk";
> > > +        clocks = <&xtal>;
> > > +        clock-names = "xtal";
> > > +        status = "okay";
> >
> > status can be dropped, okay is the default.
> >
> > Cheers,
> > Conor.
> >
> I will drop this patch for now, wait for the S4 clock driver to be
> upstreamed, and use that as a base.

Why? Is the t7-clkc IP the same or very similar to the S4?
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml b/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
new file mode 100644
index 000000000000..18e7cca0c0e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
@@ -0,0 +1,69 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,mesont7-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson T7 Clock Controller
+
+maintainers:
+  - Lucas Tanure <tanure@linux.com>
+
+description: |
+  The Amlogic Meson T7 clock controller generates and supplies clock to
+  various peripherals within the SoC.
+
+  This binding uses common clock bindings
+  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+properties:
+  compatible:
+    const: amlogic,t7-clkc
+
+  reg:
+    items:
+      - description: basic registers
+      - description: pll registers
+      - description: cpu_clk registers
+
+  reg-names:
+    items:
+      - const: basic
+      - const: pll
+      - const: cpu_clk
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xtal
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock controller node:
+  - |
+    clkc: clock-controller {
+        compatible = "amlogic,t7-clkc";
+        #clock-cells = <1>;
+        reg = <0x0 0x0000 0x00 0x49c>,
+              <0x0 0x8000 0x00 0x320>,
+              <0x0 0xe040 0x00 0x0bc>;
+        reg-names = "basic", "pll", "cpu_clk";
+        clocks = <&xtal>;
+        clock-names = "xtal";
+        status = "okay";
+    };
+
+...
diff --git a/include/dt-bindings/clock/mesont7-clkc.h b/include/dt-bindings/clock/mesont7-clkc.h
new file mode 100644
index 000000000000..8bc1122b75a7
--- /dev/null
+++ b/include/dt-bindings/clock/mesont7-clkc.h
@@ -0,0 +1,487 @@ 
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (c) 2019 Amlogic Inc. All rights reserved.
+ */
+
+#ifndef __T7_CLKC_H
+#define __T7_CLKC_H
+
+/*
+ * CLKID index values
+ */
+
+#define CLKID_FIXED_PLL_DCO		0
+#define CLKID_FIXED_PLL			1
+#define CLKID_SYS_PLL_DCO		2
+#define CLKID_SYS_PLL			3
+#define CLKID_FCLK_DIV2_DIV		4
+#define CLKID_FCLK_DIV2			5
+#define CLKID_FCLK_DIV3_DIV		6
+#define CLKID_FCLK_DIV3			7
+#define CLKID_FCLK_DIV4_DIV		8
+#define CLKID_FCLK_DIV4			9
+#define CLKID_FCLK_DIV5_DIV		10
+#define CLKID_FCLK_DIV5			11
+#define CLKID_FCLK_DIV7_DIV		12
+#define CLKID_FCLK_DIV7			13
+#define CLKID_FCLK_DIV2P5_DIV		14
+#define CLKID_FCLK_DIV2P5		15
+#define CLKID_GP0_PLL_DCO		16
+#define CLKID_GP0_PLL			17
+#define CLKID_GP1_PLL_DCO		18
+#define CLKID_GP1_PLL			19
+#define CLKID_SYS1_PLL_DCO		20
+#define CLKID_SYS1_PLL			21
+#define CLKID_CPU_DYN_CLK		22
+#define CLKID_CPU_CLK			23
+#define CLKID_A73_DYN_CLK		24
+#define CLKID_A73_CLK			25
+#define CLKID_CPU1_CLK			26
+#define CLKID_CPU2_CLK			27
+#define CLKID_CPU3_CLK			28
+#define CLKID_MCLK_PLL_DCO		29
+#define CLKID_MCLK_PRE			30
+#define CLKID_MCLK_PLL			31
+
+#define CLKID_PLL_BASE			32
+#define CLKID_HIFI_PLL_DCO		(CLKID_PLL_BASE + 0)
+#define CLKID_HIFI_PLL			(CLKID_PLL_BASE + 1)
+#define CLKID_PCIE_PLL_DCO		(CLKID_PLL_BASE + 2)
+#define CLKID_PCIE_PLL_DCO_DIV2		(CLKID_PLL_BASE + 3)
+#define CLKID_PCIE_PLL_OD		(CLKID_PLL_BASE + 4)
+#define CLKID_PCIE_PLL			(CLKID_PLL_BASE + 5)
+#define CLKID_HDMI_PLL_DCO		(CLKID_PLL_BASE + 6)
+#define CLKID_HDMI_PLL_OD		(CLKID_PLL_BASE + 7)
+#define CLKID_HDMI_PLL			(CLKID_PLL_BASE + 8)
+#define CLKID_MPLL_50M_DIV		(CLKID_PLL_BASE + 9)
+#define CLKID_MPLL_50M			(CLKID_PLL_BASE + 10)
+#define CLKID_MPLL_PREDIV		(CLKID_PLL_BASE + 11)
+#define CLKID_MPLL0_DIV			(CLKID_PLL_BASE + 12)
+#define CLKID_MPLL0			(CLKID_PLL_BASE + 13)
+#define CLKID_MPLL1_DIV			(CLKID_PLL_BASE + 14)
+#define CLKID_MPLL1			(CLKID_PLL_BASE + 15)
+#define CLKID_MPLL2_DIV			(CLKID_PLL_BASE + 16)
+#define CLKID_MPLL2			(CLKID_PLL_BASE + 17)
+#define CLKID_MPLL3_DIV			(CLKID_PLL_BASE + 18)
+#define CLKID_MPLL3			(CLKID_PLL_BASE + 19)
+#define CLKID_PCIE_BGP			(CLKID_PLL_BASE + 20)
+#define CLKID_PCIE_HCSL			(CLKID_PLL_BASE + 21)
+
+#define CLKID_BASE			(CLKID_PLL_BASE + 22)
+#define CLKID_RTC_32K_CLKIN		(CLKID_BASE + 0)
+#define CLKID_RTC_32K_DIV		(CLKID_BASE + 1)
+#define CLKID_RTC_32K_XATL		(CLKID_BASE + 2)
+#define CLKID_RTC_32K_MUX		(CLKID_BASE + 3)
+#define CLKID_RTC_CLK			(CLKID_BASE + 4)
+#define CLKID_SYS_CLK_B_MUX		(CLKID_BASE + 5)
+#define CLKID_SYS_CLK_B_DIV		(CLKID_BASE + 6)
+#define CLKID_SYS_CLK_B_GATE		(CLKID_BASE + 7)
+#define CLKID_SYS_CLK_A_MUX		(CLKID_BASE + 8)
+#define CLKID_SYS_CLK_A_DIV		(CLKID_BASE + 9)
+#define CLKID_SYS_CLK_A_GATE		(CLKID_BASE + 10)
+#define CLKID_SYS_CLK			(CLKID_BASE + 11)
+#define CLKID_CECA_32K_CLKIN		(CLKID_BASE + 12)
+#define CLKID_CECA_32K_DIV		(CLKID_BASE + 13)
+#define CLKID_CECA_32K_MUX_PRE		(CLKID_BASE + 14)
+#define CLKID_CECA_32K_MUX		(CLKID_BASE + 15)
+#define CLKID_CECA_32K_CLKOUT		(CLKID_BASE + 16)
+#define CLKID_CECB_32K_CLKIN		(CLKID_BASE + 17)
+#define CLKID_CECB_32K_DIV		(CLKID_BASE + 18)
+#define CLKID_CECB_32K_MUX_PRE		(CLKID_BASE + 19)
+#define CLKID_CECB_32K_MUX		(CLKID_BASE + 20)
+#define CLKID_CECB_32K_CLKOUT		(CLKID_BASE + 21)
+#define CLKID_SC_CLK_MUX		(CLKID_BASE + 22)
+#define CLKID_SC_CLK_DIV		(CLKID_BASE + 23)
+#define CLKID_SC_CLK_GATE		(CLKID_BASE + 24)
+#define CLKID_DSPA_CLK_B_MUX		(CLKID_BASE + 25)
+#define CLKID_DSPA_CLK_B_DIV		(CLKID_BASE + 26)
+#define CLKID_DSPA_CLK_B_GATE		(CLKID_BASE + 27)
+#define CLKID_DSPA_CLK_A_MUX		(CLKID_BASE + 28)
+#define CLKID_DSPA_CLK_A_DIV		(CLKID_BASE + 29)
+#define CLKID_DSPA_CLK_A_GATE		(CLKID_BASE + 30)
+#define CLKID_DSPA_CLK			(CLKID_BASE + 31)
+#define CLKID_24M_CLK_GATE		(CLKID_BASE + 32)
+#define CLKID_12M_CLK_DIV		(CLKID_BASE + 33)
+#define CLKID_12M_CLK_GATE		(CLKID_BASE + 34)
+#define CLKID_25M_CLK_DIV		(CLKID_BASE + 35)
+#define CLKID_25M_CLK_GATE		(CLKID_BASE + 36)
+/* Video clks */
+#define CLKID_VID_PLL_DIV		(CLKID_BASE + 37)
+#define CLKID_VID_PLL_MUX		(CLKID_BASE + 38)
+#define CLKID_VID_PLL			(CLKID_BASE + 39)
+#define CLKID_VCLK_MUX			(CLKID_BASE + 40)
+#define CLKID_VCLK2_MUX			(CLKID_BASE + 41)
+#define CLKID_VCLK_INPUT		(CLKID_BASE + 42)
+#define CLKID_VCLK2_INPUT		(CLKID_BASE + 43)
+#define CLKID_VCLK_DIV			(CLKID_BASE + 44)
+#define CLKID_VCLK2_DIV			(CLKID_BASE + 45)
+#define CLKID_VCLK			(CLKID_BASE + 46)
+#define CLKID_VCLK2			(CLKID_BASE + 47)
+#define CLKID_VCLK_DIV1			(CLKID_BASE + 48)
+#define CLKID_VCLK_DIV2_EN		(CLKID_BASE + 49)
+#define CLKID_VCLK_DIV4_EN		(CLKID_BASE + 50)
+#define CLKID_VCLK_DIV6_EN		(CLKID_BASE + 51)
+#define CLKID_VCLK_DIV12_EN		(CLKID_BASE + 52)
+#define CLKID_VCLK2_DIV1		(CLKID_BASE + 53)
+#define CLKID_VCLK2_DIV2_EN		(CLKID_BASE + 54)
+#define CLKID_VCLK2_DIV4_EN		(CLKID_BASE + 55)
+#define CLKID_VCLK2_DIV6_EN		(CLKID_BASE + 56)
+#define CLKID_VCLK2_DIV12_EN		(CLKID_BASE + 57)
+#define CLKID_VCLK_DIV2			(CLKID_BASE + 58)
+#define CLKID_VCLK_DIV4			(CLKID_BASE + 59)
+#define CLKID_VCLK_DIV6			(CLKID_BASE + 60)
+#define CLKID_VCLK_DIV12		(CLKID_BASE + 61)
+#define CLKID_VCLK2_DIV2		(CLKID_BASE + 62)
+#define CLKID_VCLK2_DIV4		(CLKID_BASE + 63)
+#define CLKID_VCLK2_DIV6		(CLKID_BASE + 64)
+#define CLKID_VCLK2_DIV12		(CLKID_BASE + 65)
+#define CLKID_CTS_ENCI_MUX		(CLKID_BASE + 66)
+#define CLKID_CTS_ENCP_MUX		(CLKID_BASE + 67)
+#define CLKID_CTS_VDAC_MUX		(CLKID_BASE + 68)
+#define CLKID_HDMI_TX_MUX		(CLKID_BASE + 69)
+#define CLKID_CTS_ENCI			(CLKID_BASE + 70)
+#define CLKID_CTS_ENCP			(CLKID_BASE + 71)
+#define CLKID_CTS_VDAC			(CLKID_BASE + 72)
+#define CLKID_HDMI_TX			(CLKID_BASE + 73)
+#define CLKID_HDMITX_SYS_MUX		(CLKID_BASE + 74)
+#define CLKID_HDMITX_SYS_DIV		(CLKID_BASE + 75)
+#define CLKID_HDMITX_SYS		(CLKID_BASE + 76)
+#define CLKID_TS_CLK_DIV		(CLKID_BASE + 77)
+#define CLKID_TS_CLK_GATE		(CLKID_BASE + 78)
+#define CLKID_MALI_0_SEL		(CLKID_BASE + 79)
+#define CLKID_MALI_0_DIV		(CLKID_BASE + 80)
+#define CLKID_MALI_0			(CLKID_BASE + 81)
+#define CLKID_MALI_1_SEL		(CLKID_BASE + 82)
+#define CLKID_MALI_1_DIV		(CLKID_BASE + 83)
+#define CLKID_MALI_1			(CLKID_BASE + 84)
+#define CLKID_MALI_MUX			(CLKID_BASE + 85)
+#define CLKID_VDEC_P0_MUX		(CLKID_BASE + 86)
+#define CLKID_VDEC_P0_DIV		(CLKID_BASE + 87)
+#define CLKID_VDEC_P0			(CLKID_BASE + 88)
+#define CLKID_VDEC_P1_MUX		(CLKID_BASE + 89)
+#define CLKID_VDEC_P1_DIV		(CLKID_BASE + 90)
+#define CLKID_VDEC_P1			(CLKID_BASE + 91)
+#define CLKID_VDEC_MUX			(CLKID_BASE + 92)
+#define CLKID_HCODEC_P0_MUX		(CLKID_BASE + 93)
+#define CLKID_HCODEC_P0_DIV		(CLKID_BASE + 94)
+#define CLKID_HCODEC_P0			(CLKID_BASE + 95)
+#define CLKID_HCODEC_P1_MUX		(CLKID_BASE + 96)
+#define CLKID_HCODEC_P1_DIV		(CLKID_BASE + 97)
+#define CLKID_HCODEC_P1			(CLKID_BASE + 98)
+#define CLKID_HCODEC_MUX		(CLKID_BASE + 99)
+#define CLKID_HEVCB_P0_MUX		(CLKID_BASE + 100)
+#define CLKID_HEVCB_P0_DIV		(CLKID_BASE + 101)
+#define CLKID_HEVCB_P0			(CLKID_BASE + 102)
+#define CLKID_HEVCB_P1_MUX		(CLKID_BASE + 103)
+#define CLKID_HEVCB_P1_DIV		(CLKID_BASE + 104)
+#define CLKID_HEVCB_P1			(CLKID_BASE + 105)
+#define CLKID_HEVCB_MUX			(CLKID_BASE + 106)
+#define CLKID_HEVCF_P0_MUX		(CLKID_BASE + 107)
+#define CLKID_HEVCF_P0_DIV		(CLKID_BASE + 108)
+#define CLKID_HEVCF_P0			(CLKID_BASE + 109)
+#define CLKID_HEVCF_P1_MUX		(CLKID_BASE + 110)
+#define CLKID_HEVCF_P1_DIV		(CLKID_BASE + 111)
+#define CLKID_HEVCF_P1			(CLKID_BASE + 112)
+#define CLKID_HEVCF_MUX			(CLKID_BASE + 113)
+#define CLKID_WAVE_A_MUX		(CLKID_BASE + 114)
+#define CLKID_WAVE_A_DIV		(CLKID_BASE + 115)
+#define CLKID_WAVE_A_GATE		(CLKID_BASE + 116)
+#define CLKID_WAVE_B_MUX		(CLKID_BASE + 117)
+#define CLKID_WAVE_B_DIV		(CLKID_BASE + 118)
+#define CLKID_WAVE_B_GATE		(CLKID_BASE + 119)
+#define CLKID_WAVE_C_MUX		(CLKID_BASE + 120)
+#define CLKID_WAVE_C_DIV		(CLKID_BASE + 121)
+#define CLKID_WAVE_C_GATE		(CLKID_BASE + 122)
+#define CLKID_VPU_0_MUX			(CLKID_BASE + 123)
+#define CLKID_VPU_0_DIV			(CLKID_BASE + 124)
+#define CLKID_VPU_0			(CLKID_BASE + 125)
+#define CLKID_VPU_1_MUX			(CLKID_BASE + 126)
+#define CLKID_VPU_1_DIV			(CLKID_BASE + 127)
+#define CLKID_VPU_1			(CLKID_BASE + 128)
+#define CLKID_VPU			(CLKID_BASE + 129)
+#define CLKID_VPU_CLKB_TMP_MUX		(CLKID_BASE + 130)
+#define CLKID_VPU_CLKB_TMP_DIV		(CLKID_BASE + 131)
+#define CLKID_VPU_CLKB_TMP		(CLKID_BASE + 132)
+#define CLKID_VPU_CLKB_DIV		(CLKID_BASE + 133)
+#define CLKID_VPU_CLKB			(CLKID_BASE + 134)
+#define CLKID_VPU_CLKC_P0_MUX		(CLKID_BASE + 135)
+#define CLKID_VPU_CLKC_P0_DIV		(CLKID_BASE + 136)
+#define CLKID_VPU_CLKC_P0		(CLKID_BASE + 137)
+#define CLKID_VPU_CLKC_P1_MUX		(CLKID_BASE + 138)
+#define CLKID_VPU_CLKC_P1_DIV		(CLKID_BASE + 139)
+#define CLKID_VPU_CLKC_P1		(CLKID_BASE + 140)
+#define CLKID_VPU_CLKC_MUX		(CLKID_BASE + 141)
+#define CLKID_VAPB_0_MUX		(CLKID_BASE + 142)
+#define CLKID_VAPB_0_DIV		(CLKID_BASE + 143)
+#define CLKID_VAPB_0			(CLKID_BASE + 144)
+#define CLKID_VAPB_1_MUX		(CLKID_BASE + 145)
+#define CLKID_VAPB_1_DIV		(CLKID_BASE + 146)
+#define CLKID_VAPB_1			(CLKID_BASE + 147)
+#define CLKID_VAPB			(CLKID_BASE + 148)
+#define CLKID_GE2D			(CLKID_BASE + 149)
+#define CLKID_VDIN_MEAS_MUX		(CLKID_BASE + 150)
+#define CLKID_VDIN_MEAS_DIV		(CLKID_BASE + 151)
+#define CLKID_VDIN_MEAS_GATE		(CLKID_BASE + 152)
+#define CLKID_DSI_A_MEAS_MUX		(CLKID_BASE + 153)
+#define CLKID_DSI_A_MEAS_DIV		(CLKID_BASE + 154)
+#define CLKID_DSI_A_MEAS_GATE		(CLKID_BASE + 155)
+#define CLKID_DSI_B_MEAS_MUX		(CLKID_BASE + 156)
+#define CLKID_DSI_B_MEAS_DIV		(CLKID_BASE + 157)
+#define CLKID_DSI_B_MEAS_GATE		(CLKID_BASE + 158)
+#define CLKID_DSI0_PHY_MUX		(CLKID_BASE + 159)
+#define CLKID_DSI0_PHY_DIV		(CLKID_BASE + 160)
+#define CLKID_DSI0_PHY_GATE		(CLKID_BASE + 161)
+#define CLKID_DSI1_PHY_MUX		(CLKID_BASE + 162)
+#define CLKID_DSI1_PHY_DIV		(CLKID_BASE + 163)
+#define CLKID_DSI1_PHY_GATE		(CLKID_BASE + 164)
+#define CLKID_VID_LOCK_DIV		(CLKID_BASE + 165)
+#define CLKID_VID_LOCK			(CLKID_BASE + 166)
+#define PERI_BASE			(CLKID_BASE + 167)
+#define CLKID_PWM_A_MUX			(PERI_BASE + 0)
+#define CLKID_PWM_A_DIV			(PERI_BASE + 1)
+#define CLKID_PWM_A_GATE		(PERI_BASE + 2)
+#define CLKID_PWM_B_MUX			(PERI_BASE + 3)
+#define CLKID_PWM_B_DIV			(PERI_BASE + 4)
+#define CLKID_PWM_B_GATE		(PERI_BASE + 5)
+#define CLKID_PWM_C_MUX			(PERI_BASE + 6)
+#define CLKID_PWM_C_DIV			(PERI_BASE + 7)
+#define CLKID_PWM_C_GATE		(PERI_BASE + 8)
+#define CLKID_PWM_D_MUX			(PERI_BASE + 9)
+#define CLKID_PWM_D_DIV			(PERI_BASE + 10)
+#define CLKID_PWM_D_GATE		(PERI_BASE + 11)
+#define CLKID_PWM_E_MUX			(PERI_BASE + 12)
+#define CLKID_PWM_E_DIV			(PERI_BASE + 13)
+#define CLKID_PWM_E_GATE		(PERI_BASE + 14)
+#define CLKID_PWM_F_MUX			(PERI_BASE + 15)
+#define CLKID_PWM_F_DIV			(PERI_BASE + 16)
+#define CLKID_PWM_F_GATE		(PERI_BASE + 17)
+#define CLKID_PWM_AO_A_MUX		(PERI_BASE + 18)
+#define CLKID_PWM_AO_A_DIV		(PERI_BASE + 19)
+#define CLKID_PWM_AO_A_GATE		(PERI_BASE + 20)
+#define CLKID_PWM_AO_B_MUX		(PERI_BASE + 21)
+#define CLKID_PWM_AO_B_DIV		(PERI_BASE + 22)
+#define CLKID_PWM_AO_B_GATE		(PERI_BASE + 23)
+#define CLKID_PWM_AO_C_MUX		(PERI_BASE + 24)
+#define CLKID_PWM_AO_C_DIV		(PERI_BASE + 25)
+#define CLKID_PWM_AO_C_GATE		(PERI_BASE + 26)
+#define CLKID_PWM_AO_D_MUX		(PERI_BASE + 27)
+#define CLKID_PWM_AO_D_DIV		(PERI_BASE + 28)
+#define CLKID_PWM_AO_D_GATE		(PERI_BASE + 29)
+#define CLKID_PWM_AO_E_MUX		(PERI_BASE + 30)
+#define CLKID_PWM_AO_E_DIV		(PERI_BASE + 31)
+#define CLKID_PWM_AO_E_GATE		(PERI_BASE + 32)
+#define CLKID_PWM_AO_F_MUX		(PERI_BASE + 33)
+#define CLKID_PWM_AO_F_DIV		(PERI_BASE + 34)
+#define CLKID_PWM_AO_F_GATE		(PERI_BASE + 35)
+#define CLKID_PWM_AO_G_MUX		(PERI_BASE + 36)
+#define CLKID_PWM_AO_G_DIV		(PERI_BASE + 37)
+#define CLKID_PWM_AO_G_GATE		(PERI_BASE + 38)
+#define CLKID_PWM_AO_H_MUX		(PERI_BASE + 39)
+#define CLKID_PWM_AO_H_DIV		(PERI_BASE + 40)
+#define CLKID_PWM_AO_H_GATE		(PERI_BASE + 41)
+#define CLKID_SPICC0_MUX		(PERI_BASE + 42)
+#define CLKID_SPICC0_DIV		(PERI_BASE + 43)
+#define CLKID_SPICC0_GATE		(PERI_BASE + 44)
+#define CLKID_SPICC1_MUX		(PERI_BASE + 45)
+#define CLKID_SPICC1_DIV		(PERI_BASE + 46)
+#define CLKID_SPICC1_GATE		(PERI_BASE + 47)
+#define CLKID_SPICC2_MUX		(PERI_BASE + 48)
+#define CLKID_SPICC2_DIV		(PERI_BASE + 49)
+#define CLKID_SPICC2_GATE		(PERI_BASE + 50)
+#define CLKID_SPICC3_MUX		(PERI_BASE + 51)
+#define CLKID_SPICC3_DIV		(PERI_BASE + 52)
+#define CLKID_SPICC3_GATE		(PERI_BASE + 53)
+#define CLKID_SPICC4_MUX		(PERI_BASE + 54)
+#define CLKID_SPICC4_DIV		(PERI_BASE + 55)
+#define CLKID_SPICC4_GATE		(PERI_BASE + 56)
+#define CLKID_SPICC5_MUX		(PERI_BASE + 57)
+#define CLKID_SPICC5_DIV		(PERI_BASE + 58)
+#define CLKID_SPICC5_GATE		(PERI_BASE + 59)
+#define CLKID_SD_EMMC_C_CLK_MUX		(PERI_BASE + 60)
+#define CLKID_SD_EMMC_C_CLK_DIV		(PERI_BASE + 61)
+#define CLKID_SD_EMMC_C_CLK		(PERI_BASE + 62)
+#define CLKID_SD_EMMC_A_CLK_MUX		(PERI_BASE + 63)
+#define CLKID_SD_EMMC_A_CLK_DIV		(PERI_BASE + 64)
+#define CLKID_SD_EMMC_A_CLK		(PERI_BASE + 65)
+#define CLKID_SD_EMMC_B_CLK_MUX		(PERI_BASE + 66)
+#define CLKID_SD_EMMC_B_CLK_DIV		(PERI_BASE + 67)
+#define CLKID_SD_EMMC_B_CLK		(PERI_BASE + 68)
+#define CLKID_ETH_RMII_SEL		(PERI_BASE + 69)
+#define CLKID_ETH_RMII_DIV		(PERI_BASE + 70)
+#define CLKID_ETH_RMII			(PERI_BASE + 71)
+#define CLKID_ETH_DIV8			(PERI_BASE + 72)
+#define CLKID_ETH_125M			(PERI_BASE + 73)
+#define CLKID_SARADC_MUX		(PERI_BASE + 74)
+#define CLKID_SARADC_DIV		(PERI_BASE + 75)
+#define CLKID_SARADC_GATE		(PERI_BASE + 76)
+#define CLKID_GEN_MUX			(PERI_BASE + 77)
+#define CLKID_GEN_DIV			(PERI_BASE + 78)
+#define CLKID_GEN_GATE			(PERI_BASE + 79)
+
+#define MEDIA_BASE			(PERI_BASE + 80)
+#define CLKID_DSPB_CLK_B_MUX		(MEDIA_BASE + 0)
+#define CLKID_DSPB_CLK_B_DIV		(MEDIA_BASE + 1)
+#define CLKID_DSPB_CLK_B_GATE		(MEDIA_BASE + 2)
+#define CLKID_DSPB_CLK_A_MUX		(MEDIA_BASE + 3)
+#define CLKID_DSPB_CLK_A_DIV		(MEDIA_BASE + 4)
+#define CLKID_DSPB_CLK_A_GATE		(MEDIA_BASE + 5)
+#define CLKID_DSPB_CLK			(MEDIA_BASE + 6)
+#define CLKID_MIPI_ISP_MUX		(MEDIA_BASE + 7)
+#define CLKID_MIPI_ISP_DIV		(MEDIA_BASE + 8)
+#define CLKID_MIPI_ISP			(MEDIA_BASE + 9)
+#define CLKID_MIPI_CSI_PHY_SEL0		(MEDIA_BASE + 10)
+#define CLKID_MIPI_CSI_PHY_DIV0		(MEDIA_BASE + 11)
+#define CLKID_MIPI_CSI_PHY0		(MEDIA_BASE + 12)
+#define CLKID_MIPI_CSI_PHY_SEL1		(MEDIA_BASE + 13)
+#define CLKID_MIPI_CSI_PHY_DIV1		(MEDIA_BASE + 14)
+#define CLKID_MIPI_CSI_PHY1		(MEDIA_BASE + 15)
+#define CLKID_MIPI_CSI_PHY_CLK		(MEDIA_BASE + 16)
+#define CLKID_GDCCLK_0_MUX		(MEDIA_BASE + 17)
+#define CLKID_GDCCLK_0_DIV		(MEDIA_BASE + 18)
+#define CLKID_GDCCLK_0			(MEDIA_BASE + 19)
+#define CLKID_GDCCLK_1_MUX		(MEDIA_BASE + 20)
+#define CLKID_GDCCLK_1_DIV		(MEDIA_BASE + 21)
+#define CLKID_GDCCLK_1			(MEDIA_BASE + 22)
+#define CLKID_GDCCLK			(MEDIA_BASE + 23)
+#define CLKID_GDC_CLK			(MEDIA_BASE + 24)
+#define CLKID_DEWARPCLK_0_MUX		(MEDIA_BASE + 25)
+#define CLKID_DEWARPCLK_0_DIV		(MEDIA_BASE + 26)
+#define CLKID_DEWARPCLK_0		(MEDIA_BASE + 27)
+#define CLKID_DEWARPCLK_1_MUX		(MEDIA_BASE + 28)
+#define CLKID_DEWARPCLK_1_DIV		(MEDIA_BASE + 29)
+#define CLKID_DEWARPCLK_1		(MEDIA_BASE + 30)
+#define CLKID_DEWARPCLK			(MEDIA_BASE + 31)
+#define CLKID_DEWARP_CLK		(MEDIA_BASE + 32)
+#define CLKID_ANAKIN_0_MUX		(MEDIA_BASE + 33)
+#define CLKID_ANAKIN_0_DIV		(MEDIA_BASE + 34)
+#define CLKID_ANAKIN_0			(MEDIA_BASE + 35)
+#define CLKID_ANAKIN_1_MUX		(MEDIA_BASE + 36)
+#define CLKID_ANAKIN_1_DIV		(MEDIA_BASE + 37)
+#define CLKID_ANAKIN_1			(MEDIA_BASE + 38)
+#define CLKID_ANAKIN			(MEDIA_BASE + 39)
+#define CLKID_ANAKIN_CLK		(MEDIA_BASE + 40)
+#define CLKID_HDMITX_PRIF_MUX		(MEDIA_BASE + 41)
+#define CLKID_HDMITX_PRIF_DIV		(MEDIA_BASE + 42)
+#define CLKID_HDMITX_PRIF		(MEDIA_BASE + 43)
+#define CLKID_HDMITX_200M_MUX		(MEDIA_BASE + 44)
+#define CLKID_HDMITX_200M_DIV		(MEDIA_BASE + 45)
+#define CLKID_HDMITX_200M		(MEDIA_BASE + 46)
+#define CLKID_HDMITX_AUD_MUX		(MEDIA_BASE + 47)
+#define CLKID_HDMITX_AUD_DIV		(MEDIA_BASE + 48)
+#define CLKID_HDMITX_AUD		(MEDIA_BASE + 49)
+#define CLKID_HDMIRX_2M_MUX		(MEDIA_BASE + 50)
+#define CLKID_HDMIRX_2M_DIV		(MEDIA_BASE + 51)
+#define CLKID_HDMIRX_2M			(MEDIA_BASE + 52)
+#define CLKID_HDMIRX_5M_MUX		(MEDIA_BASE + 53)
+#define CLKID_HDMIRX_5M_DIV		(MEDIA_BASE + 54)
+#define CLKID_HDMIRX_5M			(MEDIA_BASE + 55)
+#define CLKID_HDMIRX_CFG_MUX		(MEDIA_BASE + 56)
+#define CLKID_HDMIRX_CFG_DIV		(MEDIA_BASE + 57)
+#define CLKID_HDMIRX_CFG		(MEDIA_BASE + 58)
+#define CLKID_HDMIRX_HDCP_MUX		(MEDIA_BASE + 59)
+#define CLKID_HDMIRX_HDCP_DIV		(MEDIA_BASE + 60)
+#define CLKID_HDMIRX_HDCP		(MEDIA_BASE + 61)
+#define CLKID_HDMIRX_AUD_PLL_MUX	(MEDIA_BASE + 62)
+#define CLKID_HDMIRX_AUD_PLL_DIV	(MEDIA_BASE + 63)
+#define CLKID_HDMIRX_AUD_PLL		(MEDIA_BASE + 64)
+#define CLKID_HDMIRX_ACR_MUX		(MEDIA_BASE + 65)
+#define CLKID_HDMIRX_ACR_DIV		(MEDIA_BASE + 66)
+#define CLKID_HDMIRX_ACR		(MEDIA_BASE + 67)
+#define CLKID_HDMIRX_METER_MUX		(MEDIA_BASE + 68)
+#define CLKID_HDMIRX_METER_DIV		(MEDIA_BASE + 69)
+#define CLKID_HDMIRX_METER		(MEDIA_BASE + 70)
+#define CLKID_MCLK_0_SEL		(MEDIA_BASE + 71)
+#define CLKID_MCLK_0_DIV2		(MEDIA_BASE + 72)
+#define CLKID_MCLK_0_PRE		(MEDIA_BASE + 73)
+#define CLKID_MCLK_0			(MEDIA_BASE + 74)
+#define CLKID_MCLK_1_SEL		(MEDIA_BASE + 75)
+#define CLKID_MCLK_1_DIV2		(MEDIA_BASE + 76)
+#define CLKID_MCLK_1_PRE		(MEDIA_BASE + 77)
+#define CLKID_MCLK_1			(MEDIA_BASE + 78)
+
+#define SYS_BASE			(MEDIA_BASE + 79)
+#define CLKID_DDR			(SYS_BASE + 0)
+#define CLKID_DOS			(SYS_BASE + 1)
+#define CLKID_ETHPHY			(SYS_BASE + 2)
+#define CLKID_MALI			(SYS_BASE + 3)
+#define CLKID_TS_A53			(SYS_BASE + 4)
+#define CLKID_TS_A73			(SYS_BASE + 5)
+#define CLKID_CEC			(SYS_BASE + 6)
+#define CLKID_SD_EMMC_A			(SYS_BASE + 7)
+#define CLKID_SD_EMMC_B			(SYS_BASE + 8)
+#define CLKID_SD_EMMC_C			(SYS_BASE + 9)
+#define CLKID_SMARTCARD			(SYS_BASE + 10)
+#define CLKID_ACODEC			(SYS_BASE + 11)
+#define CLKID_SPIFC			(SYS_BASE + 12)
+#define CLKID_MSR_CLK			(SYS_BASE + 13)
+#define CLKID_IR_CTRL			(SYS_BASE + 14)
+#define CLKID_AUDIO			(SYS_BASE + 15)
+#define CLKID_ETH			(SYS_BASE + 16)
+#define CLKID_UART_A			(SYS_BASE + 17)
+#define CLKID_UART_B			(SYS_BASE + 18)
+#define CLKID_UART_C			(SYS_BASE + 19)
+#define CLKID_UART_D			(SYS_BASE + 20)
+#define CLKID_UART_E			(SYS_BASE + 21)
+#define CLKID_AIFIFO			(SYS_BASE + 22)
+#define CLKID_TS_DDR			(SYS_BASE + 23)
+#define CLKID_TS_PLL			(SYS_BASE + 24)
+#define CLKID_G2D			(SYS_BASE + 25)
+#define CLKID_SPICC0			(SYS_BASE + 26)
+#define CLKID_SPICC1			(SYS_BASE + 27)
+#define CLKID_PCIE			(SYS_BASE + 28)
+#define CLKID_USB			(SYS_BASE + 29)
+#define CLKID_PCIE_PHY			(SYS_BASE + 30)
+#define CLKID_I2C_M_A			(SYS_BASE + 31)
+#define CLKID_I2C_M_B			(SYS_BASE + 32)
+#define CLKID_I2C_M_C			(SYS_BASE + 33)
+#define CLKID_I2C_M_D			(SYS_BASE + 34)
+#define CLKID_I2C_M_E			(SYS_BASE + 35)
+#define CLKID_I2C_M_F			(SYS_BASE + 36)
+#define CLKID_HDMITX_APB		(SYS_BASE + 37)
+#define CLKID_I2C_S_A			(SYS_BASE + 38)
+#define CLKID_USB1_TO_DDR		(SYS_BASE + 39)
+#define CLKID_AOCPU			(SYS_BASE + 40)
+#define CLKID_MMC_APB			(SYS_BASE + 41)
+#define CLKID_RSA			(SYS_BASE + 42)
+#define CLKID_AUCPU			(SYS_BASE + 43)
+#define CLKID_DSPA			(SYS_BASE + 44)
+#define CLKID_VPU_INTR			(SYS_BASE + 45)
+#define CLKID_SAR_ADC			(SYS_BASE + 46)
+#define CLKID_GIC			(SYS_BASE + 47)
+#define CLKID_PWM_AB			(SYS_BASE + 48)
+#define CLKID_PWM_CD			(SYS_BASE + 49)
+#define CLKID_PWM_EF			(SYS_BASE + 50)
+#define CLKID_PWM_GH			(SYS_BASE + 51)
+#define CLKID_PWM_AO_AB			(SYS_BASE + 52)
+#define CLKID_MIPI_DSI_A		(SYS_BASE + 53)
+#define CLKID_MIPI_DSI_B		(SYS_BASE + 54)
+#define CLKID_GDC			(SYS_BASE + 55)
+#define CLKID_DESWARP			(SYS_BASE + 56)
+#define CLKID_AMPIPE_NAND		(SYS_BASE + 57)
+#define CLKID_AMPIPE_ETH		(SYS_BASE + 58)
+#define CLKID_AM2AXI0			(SYS_BASE + 59)
+#define CLKID_AM2AXI1			(SYS_BASE + 60)
+#define CLKID_AM2AXI2			(SYS_BASE + 61)
+#define CLKID_PWM_AO_CD			(SYS_BASE + 62)
+#define CLKID_PWM_AO_EF			(SYS_BASE + 63)
+#define CLKID_PWM_AO_GH			(SYS_BASE + 64)
+#define CLKID_TS_NNA			(SYS_BASE + 65)
+#define CLKID_TS_GPU			(SYS_BASE + 66)
+#define CLKID_TS_HEVC			(SYS_BASE + 67)
+#define CLKID_DSPB			(SYS_BASE + 68)
+#define CLKID_SPICC2			(SYS_BASE + 69)
+#define CLKID_SPICC3			(SYS_BASE + 70)
+#define CLKID_SPICC4			(SYS_BASE + 71)
+#define CLKID_SPICC5			(SYS_BASE + 72)
+#define CLKID_I2C_AO_A			(SYS_BASE + 73)
+#define CLKID_I2C_AO_B			(SYS_BASE + 74)
+#define CLKID_UART_F			(SYS_BASE + 75)
+#define CLKID_MIPI_ISP_PCLK		(SYS_BASE + 76)
+#define CLKID_HDMIRX_PCLK		(SYS_BASE + 77)
+#define CLKID_PCLK_SYS_CPU_APB		(SYS_BASE + 78)
+#define CLKID_A73PCLK_CPU_APB		(SYS_BASE + 79)
+#define CLKID_TS_VPU			(SYS_BASE + 80)
+
+#define NR_CLKS				(SYS_BASE + 81)
+
+#endif /* __T7_CLKC_H */