diff mbox series

[v4,6/6] iommu/qcom: Add support for QSMMUv2 and QSMMU-500 secured contexts

Message ID 20230620095127.96600-7-angelogioacchino.delregno@collabora.com (mailing list archive)
State New, archived
Headers show
Series Add support for Qualcomm's legacy IOMMU v2 | expand

Commit Message

AngeloGioacchino Del Regno June 20, 2023, 9:51 a.m. UTC 
On some SoCs like MSM8956, MSM8976 and others, secure contexts are
also secured: these get programmed by the bootloader or TZ (as usual)
but their "interesting" registers are locked out by the hypervisor,
disallowing direct register writes from Linux and, in many cases,
completely disallowing the reprogramming of TTBR, TCR, MAIR and other
registers including, but not limited to, resetting contexts.
This is referred downstream as a "v2" IOMMU but this is effectively
a "v2 firmware configuration" instead.

Luckily, the described behavior of version 2 is effective only on
secure contexts and not on non-secure ones: add support for that,
finally getting a completely working IOMMU on at least MSM8956/76.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
[Marijn: Rebased over next-20221111]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/iommu/arm/arm-smmu/qcom_iommu.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iommu/arm/arm-smmu/qcom_iommu.c b/drivers/iommu/arm/arm-smmu/qcom_iommu.c
index f4b948a0bd1c..5b69f336b797 100644
--- a/drivers/iommu/arm/arm-smmu/qcom_iommu.c
+++ b/drivers/iommu/arm/arm-smmu/qcom_iommu.c
@@ -59,6 +59,7 @@  struct qcom_iommu_ctx {
 	struct device		*dev;
 	void __iomem		*base;
 	bool			 secure_init;
+	bool			 secured_ctx;
 	u8			 asid;      /* asid and ctx bank # are 1:1 */
 	struct iommu_domain	*domain;
 };
@@ -273,6 +274,12 @@  static int qcom_iommu_init_domain(struct iommu_domain *domain,
 			ctx->secure_init = true;
 		}
 
+		/* Secured QSMMU-500/QSMMU-v2 contexts cannot be programmed */
+		if (ctx->secured_ctx) {
+			ctx->domain = domain;
+			continue;
+		}
+
 		/* Disable context bank before programming */
 		iommu_writel(ctx, ARM_SMMU_CB_SCTLR, 0);
 
@@ -669,10 +676,14 @@  static int qcom_iommu_ctx_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return -ENODEV;
 
+	if (of_device_is_compatible(dev->of_node, "qcom,msm-iommu-v2-sec"))
+		ctx->secured_ctx = true;
+
 	/* clear IRQs before registering fault handler, just in case the
 	 * boot-loader left us a surprise:
 	 */
-	iommu_writel(ctx, ARM_SMMU_CB_FSR, iommu_readl(ctx, ARM_SMMU_CB_FSR));
+	if (!ctx->secured_ctx)
+		iommu_writel(ctx, ARM_SMMU_CB_FSR, iommu_readl(ctx, ARM_SMMU_CB_FSR));
 
 	ret = devm_request_irq(dev, irq,
 			       qcom_iommu_fault,
@@ -712,6 +723,8 @@  static void qcom_iommu_ctx_remove(struct platform_device *pdev)
 static const struct of_device_id ctx_of_match[] = {
 	{ .compatible = "qcom,msm-iommu-v1-ns" },
 	{ .compatible = "qcom,msm-iommu-v1-sec" },
+	{ .compatible = "qcom,msm-iommu-v2-ns" },
+	{ .compatible = "qcom,msm-iommu-v2-sec" },
 	{ /* sentinel */ }
 };
 
@@ -729,7 +742,8 @@  static bool qcom_iommu_has_secure_context(struct qcom_iommu_dev *qcom_iommu)
 	struct device_node *child;
 
 	for_each_child_of_node(qcom_iommu->dev->of_node, child) {
-		if (of_device_is_compatible(child, "qcom,msm-iommu-v1-sec")) {
+		if (of_device_is_compatible(child, "qcom,msm-iommu-v1-sec") ||
+		    of_device_is_compatible(child, "qcom,msm-iommu-v2-sec")) {
 			of_node_put(child);
 			return true;
 		}
@@ -873,6 +887,7 @@  static const struct dev_pm_ops qcom_iommu_pm_ops = {
 
 static const struct of_device_id qcom_iommu_of_match[] = {
 	{ .compatible = "qcom,msm-iommu-v1" },
+	{ .compatible = "qcom,msm-iommu-v2" },
 	{ /* sentinel */ }
 };