diff mbox series

[1/2] ARM: dts: imx6: phytec: fix RTC interrupt level

Message ID 20230704080304.816942-2-andrej.picej@norik.com (mailing list archive)
State New, archived
Headers show
Series PHYTEC i.MX6 device-tree fixes | expand

Commit Message

Andrej Picej July 4, 2023, 8:03 a.m. UTC 
RTC interrupt level should be set to "LOW". This was revealed by the
introduction of commit:

  f181987ef477 ("rtc: m41t80: use IRQ flags obtained from fwnode")

which changed the way IRQ type is obtained.

Signed-off-by: Andrej Picej <andrej.picej@norik.com>
---
 arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
index 1a599c294ab8..1ca4d219609f 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
@@ -182,7 +182,7 @@  i2c_rtc: rtc@68 {
 		pinctrl-0 = <&pinctrl_rtc_int>;
 		reg = <0x68>;
 		interrupt-parent = <&gpio7>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		status = "disabled";
 	};
 };