| Message ID | 20230712024017.218921-7-manikandan.m@microchip.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for XLCDC to sam9x7 SoC family. | expand |
On 12/07/23 8:10 am, Manikandan Muralidharan wrote: > - XLCDC in SAM9X7 has different sets of registers and additional > configuration bits when compared to previous HLCDC IP. Read/write > operation on the controller registers is now separated using the > XLCDC status flag. > - HEO scaling, window resampling, Alpha blending, YUV-to-RGB > conversion in XLCDC is derived and handled using additional > configuration bits and registers. > - Writing one to the Enable fields of each layer in LCD_ATTRE > is required to reflect the values set in Configuration, FBA, Enable > registers of each layer > > Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> > Co-developed-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@microchip.com> > Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@microchip.com> > Co-developed-by: Durai Manickam KR <durai.manickamkr@microchip.com> > Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com> > --- > .../gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 32 +- > .../gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 337 +++++++++++++++--- > 2 files changed, 312 insertions(+), 57 deletions(-) > > diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c > index 58184cd6ab0b..27f86cea8bff 100644 > --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c > +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c > @@ -139,10 +139,10 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c) > state = drm_crtc_state_to_atmel_hlcdc_crtc_state(c->state); > cfg = state->output_mode << 8; > > - if (adj->flags & DRM_MODE_FLAG_NVSYNC) > + if (!crtc->dc->desc->is_xlcdc && (adj->flags & DRM_MODE_FLAG_NVSYNC)) Instead of de-referencing the value of is_xlcdc flag multiple times, can we have it assigned to a local variable instead to make it more readable and avoid multiple memory accesses ? > cfg |= ATMEL_HLCDC_VSPOL; > > - if (adj->flags & DRM_MODE_FLAG_NHSYNC) > + if (!crtc->dc->desc->is_xlcdc && (adj->flags & DRM_MODE_FLAG_NHSYNC)) > cfg |= ATMEL_HLCDC_HSPOL; > > regmap_update_bits(regmap, ATMEL_HLCDC_CFG(5), > @@ -177,6 +177,20 @@ static void atmel_hlcdc_crtc_atomic_disable(struct drm_crtc *c, > > pm_runtime_get_sync(dev->dev); > > + if (crtc->dc->desc->is_xlcdc) { > + regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_CM); > + if (!regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status, > + !(status & ATMEL_XLCDC_CM), 10, > + 0)) > + cpu_relax(); cpu_relax() is not required here and at other places below since the above function yields the cpu anyway,remove them. > + > + regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_SD); > + if (!regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status, > + status & ATMEL_XLCDC_SD, 10, > + 0)) > + cpu_relax(); > + } > + > regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_DISP); > while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) && > (status & ATMEL_HLCDC_DISP)) > @@ -231,6 +245,20 @@ static void atmel_hlcdc_crtc_atomic_enable(struct drm_crtc *c, > !(status & ATMEL_HLCDC_DISP)) > cpu_relax(); > > + if (crtc->dc->desc->is_xlcdc) { > + regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_CM); > + if (!regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status, > + status & ATMEL_XLCDC_CM, 10, > + 0)) > + cpu_relax(); > + > + regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_SD); > + if (!regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status, > + !(status & ATMEL_XLCDC_SD), 10, > + 0)) > + cpu_relax(); > + } > + > pm_runtime_put_sync(dev->dev); > > } > diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c > index daa508504f47..81f103b1a51f 100644 > --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c > +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c > @@ -330,11 +330,59 @@ static void atmel_hlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane, > yfactor)); > } > > +static void atmel_xlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane, > + struct atmel_hlcdc_plane_state *state) > +{ > + const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc; > + u32 xfactor, yfactor; > + > + if (!desc->layout.scaler_config) > + return; > + > + if (state->crtc_w == state->src_w && state->crtc_h == state->src_h) { > + atmel_hlcdc_layer_write_cfg(&plane->layer, > + desc->layout.scaler_config, 0); > + return; > + } > + > + /* xfactor = round[(2^20 * XMEMSIZE)/XSIZE)] */ > + xfactor = (1048576 * state->src_w) / state->crtc_w; Use the left shift operator to represent 2^20. The comment says we need to round off the result of this math operation but the actual code doesn't implement this.Look for kernel macro's that does this.Shouldn't the variables xfactor & yfactor below be declared as u64 ? > + > + /* yfactor = round[(2^20 * YMEMSIZE)/YSIZE)] */ > + yfactor = (1048576 * state->src_h) / state->crtc_h; > + > + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config, > + ATMEL_XLCDC_LAYER_VSCALER_LUMA_ENABLE | > + ATMEL_XLCDC_LAYER_VSCALER_CHROMA_ENABLE | > + ATMEL_XLCDC_LAYER_HSCALER_LUMA_ENABLE | > + ATMEL_XLCDC_LAYER_HSCALER_CHROMA_ENABLE); > + > + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 1, > + yfactor); > + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 3, > + xfactor); > + > + /* As per YCbCr window resampling configuration */ > + if (state->base.fb->format->format == DRM_FORMAT_YUV420) { > + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 2, > + yfactor / 2); > + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 4, > + xfactor / 2); > + } else { > + /* As per ARGB window resampling configuration */ > + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 2, > + yfactor); > + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 4, > + xfactor); > + } > +} > + > static void > atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane, > struct atmel_hlcdc_plane_state *state) > { > const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc; > + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private; > > if (desc->layout.size) > atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.size, > @@ -352,7 +400,10 @@ atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane, > ATMEL_HLCDC_LAYER_POS(state->crtc_x, > state->crtc_y)); > > - atmel_hlcdc_plane_setup_scaler(plane, state); > + if (dc->desc->is_xlcdc) > + atmel_xlcdc_plane_setup_scaler(plane, state); > + else > + atmel_hlcdc_plane_setup_scaler(plane, state); > } > > static void > @@ -393,6 +444,40 @@ atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane, > cfg); > } > > +static void > +atmel_xlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane, > + struct atmel_hlcdc_plane_state *state) > +{ > + unsigned int cfg; > + const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc; > + const struct drm_format_info *format = state->base.fb->format; > + > + atmel_hlcdc_layer_write_cfg(&plane->layer, ATMEL_XLCDC_LAYER_DMA_CFG, > + ATMEL_HLCDC_LAYER_DMA_BLEN_INCR16 | state->ahb_id); > + > + cfg = ATMEL_XLCDC_LAYER_DMA | ATMEL_XLCDC_LAYER_REP; > + > + if (plane->base.type != DRM_PLANE_TYPE_PRIMARY) { > + /* > + * Alpha Blending bits specific to SAM9X7 SoC > + */ > + cfg |= ATMEL_XLCDC_LAYER_SFACTC_A0_MULT_AS | > + ATMEL_XLCDC_LAYER_SFACTA_ONE | > + ATMEL_XLCDC_LAYER_DFACTC_M_A0_MULT_AS | > + ATMEL_XLCDC_LAYER_DFACTA_ONE; > + if (format->has_alpha) > + cfg |= ATMEL_XLCDC_LAYER_A0(0xff); > + else > + cfg |= ATMEL_XLCDC_LAYER_A0(state->base.alpha); > + } > + > + if (state->disc_h && state->disc_w) > + cfg |= ATMEL_XLCDC_LAYER_DISCEN; > + > + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.general_config, > + cfg); > +} > + > static void atmel_hlcdc_plane_update_format(struct atmel_hlcdc_plane *plane, > struct atmel_hlcdc_plane_state *state) > { > @@ -437,36 +522,55 @@ static void atmel_hlcdc_plane_update_clut(struct atmel_hlcdc_plane *plane, > } > } > > +static void update_hlcdc_buffers(struct atmel_hlcdc_plane *plane, > + struct atmel_hlcdc_plane_state *state, u32 sr, int i) > +{ > + atmel_hlcdc_layer_write_reg(&plane->layer, > + ATMEL_HLCDC_LAYER_PLANE_HEAD(i), > + state->dscrs[i]->self); > + > + if (!(sr & ATMEL_HLCDC_LAYER_EN)) { > + atmel_hlcdc_layer_write_reg(&plane->layer, > + ATMEL_HLCDC_LAYER_PLANE_ADDR(i), > + state->dscrs[i]->addr); > + atmel_hlcdc_layer_write_reg(&plane->layer, > + ATMEL_HLCDC_LAYER_PLANE_CTRL(i), > + state->dscrs[i]->ctrl); > + atmel_hlcdc_layer_write_reg(&plane->layer, > + ATMEL_HLCDC_LAYER_PLANE_NEXT(i), > + state->dscrs[i]->self); > + } > +} > + > +static void update_xlcdc_buffers(struct atmel_hlcdc_plane *plane, > + struct atmel_hlcdc_plane_state *state, int i) > +{ > + atmel_hlcdc_layer_write_reg(&plane->layer, > + ATMEL_XLCDC_LAYER_PLANE_ADDR(i), > + state->dscrs[i]->addr); > +} > + > static void atmel_hlcdc_plane_update_buffers(struct atmel_hlcdc_plane *plane, > - struct atmel_hlcdc_plane_state *state) > + struct atmel_hlcdc_plane_state *state) > { > const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc; > + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private; > struct drm_framebuffer *fb = state->base.fb; > u32 sr; > int i; > > - sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR); > + if (!dc->desc->is_xlcdc) > + sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR); > > for (i = 0; i < state->nplanes; i++) { > struct drm_gem_dma_object *gem = drm_fb_dma_get_gem_obj(fb, i); > > state->dscrs[i]->addr = gem->dma_addr + state->offsets[i]; > > - atmel_hlcdc_layer_write_reg(&plane->layer, > - ATMEL_HLCDC_LAYER_PLANE_HEAD(i), > - state->dscrs[i]->self); > - > - if (!(sr & ATMEL_HLCDC_LAYER_EN)) { > - atmel_hlcdc_layer_write_reg(&plane->layer, > - ATMEL_HLCDC_LAYER_PLANE_ADDR(i), > - state->dscrs[i]->addr); > - atmel_hlcdc_layer_write_reg(&plane->layer, > - ATMEL_HLCDC_LAYER_PLANE_CTRL(i), > - state->dscrs[i]->ctrl); > - atmel_hlcdc_layer_write_reg(&plane->layer, > - ATMEL_HLCDC_LAYER_PLANE_NEXT(i), > - state->dscrs[i]->self); > - } > + if (dc->desc->is_xlcdc) > + update_xlcdc_buffers(plane, state, i); > + else > + update_hlcdc_buffers(plane, state, sr, i); > > if (desc->layout.xstride[i]) > atmel_hlcdc_layer_write_cfg(&plane->layer, > @@ -712,11 +816,8 @@ static int atmel_hlcdc_plane_atomic_check(struct drm_plane *p, > return 0; > } > > -static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p, > - struct drm_atomic_state *state) > +static void hlcdc_atomic_disable(struct atmel_hlcdc_plane *plane) > { > - struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p); > - > /* Disable interrupts */ > atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IDR, > 0xffffffff); > @@ -731,6 +832,72 @@ static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p, > atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR); > } > > +static void xlcdc_atomic_disable(struct atmel_hlcdc_plane *plane) > +{ > + /* Disable interrupts */ > + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IDR, > + 0xffffffff); > + > + /* Disable the layer */ > + atmel_hlcdc_layer_write_reg(&plane->layer, > + ATMEL_XLCDC_LAYER_ENR, 0); > + > + /* Clear all pending interrupts */ > + atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR); > +} > + > +static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p, > + struct drm_atomic_state *state) > +{ > + struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p); > + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private; > + > + if (dc->desc->is_xlcdc) > + xlcdc_atomic_disable(plane); > + else > + hlcdc_atomic_disable(plane); > +} > + > +static void hlcdc_atomic_update(struct atmel_hlcdc_plane *plane) > +{ > + u32 sr; > + > + /* Enable the overrun interrupts. */ > + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER, > + ATMEL_HLCDC_LAYER_OVR_IRQ(0) | > + ATMEL_HLCDC_LAYER_OVR_IRQ(1) | > + ATMEL_HLCDC_LAYER_OVR_IRQ(2)); > + > + /* Apply the new config at the next SOF event. */ > + sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR); > + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER, > + ATMEL_HLCDC_LAYER_UPDATE | > + (sr & ATMEL_HLCDC_LAYER_EN ? > + ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN)); > +} > + > +static void xlcdc_atomic_update(struct atmel_hlcdc_plane *plane, > + struct atmel_hlcdc_dc *dc) > +{ > + /* Enable the overrun interrupts. */ > + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IER, > + ATMEL_XLCDC_LAYER_OVR_IRQ(0) | > + ATMEL_XLCDC_LAYER_OVR_IRQ(1) | > + ATMEL_XLCDC_LAYER_OVR_IRQ(2)); > + > + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_ENR, > + ATMEL_XLCDC_LAYER_EN); > + > + /* > + * Updating XLCDC_xxxCFGx, XLCDC_xxxFBA and XLCDC_xxxEN, > + * (where xxx indicates each layer) requires writing one to the > + * Update Attribute field for each layer in LCDC_ATTRE register for SAM9X7. > + */ > + regmap_write(dc->hlcdc->regmap, ATMEL_XLCDC_ATTRE, ATMEL_XLCDC_BASE_UPDATE | > + ATMEL_XLCDC_OVR1_UPDATE | ATMEL_XLCDC_OVR3_UPDATE | > + ATMEL_XLCDC_HEO_UPDATE); > +} > + > static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p, > struct drm_atomic_state *state) > { > @@ -739,7 +906,7 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p, > struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p); > struct atmel_hlcdc_plane_state *hstate = > drm_plane_state_to_atmel_hlcdc_plane_state(new_s); > - u32 sr; > + struct atmel_hlcdc_dc *dc = p->dev->dev_private; > > if (!new_s->crtc || !new_s->fb) > return; > @@ -750,29 +917,73 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p, > } > > atmel_hlcdc_plane_update_pos_and_size(plane, hstate); > - atmel_hlcdc_plane_update_general_settings(plane, hstate); > + if (dc->desc->is_xlcdc) > + atmel_xlcdc_plane_update_general_settings(plane, hstate); > + else > + atmel_hlcdc_plane_update_general_settings(plane, hstate); > atmel_hlcdc_plane_update_format(plane, hstate); > atmel_hlcdc_plane_update_clut(plane, hstate); > atmel_hlcdc_plane_update_buffers(plane, hstate); > atmel_hlcdc_plane_update_disc_area(plane, hstate); > > - /* Enable the overrun interrupts. */ > - atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER, > - ATMEL_HLCDC_LAYER_OVR_IRQ(0) | > - ATMEL_HLCDC_LAYER_OVR_IRQ(1) | > - ATMEL_HLCDC_LAYER_OVR_IRQ(2)); > + if (dc->desc->is_xlcdc) > + xlcdc_atomic_update(plane, dc); > + else > + hlcdc_atomic_update(plane); > +} > > - /* Apply the new config at the next SOF event. */ > - sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR); > - atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER, > - ATMEL_HLCDC_LAYER_UPDATE | > - (sr & ATMEL_HLCDC_LAYER_EN ? > - ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN)); > +static void hlcdc_csc_init(struct atmel_hlcdc_plane *plane, > + const struct atmel_hlcdc_layer_desc *desc) > +{ > + /* > + * TODO: declare a "yuv-to-rgb-conv-factors" property to let > + * userspace modify these factors (using a BLOB property ?). > + */ > + atmel_hlcdc_layer_write_cfg(&plane->layer, > + desc->layout.csc, > + 0x4c900091); > + atmel_hlcdc_layer_write_cfg(&plane->layer, > + desc->layout.csc + 1, > + 0x7a5f5090); > + atmel_hlcdc_layer_write_cfg(&plane->layer, > + desc->layout.csc + 2, > + 0x40040890); > +} > + > +static void xlcdc_csc_init(struct atmel_hlcdc_plane *plane, > + const struct atmel_hlcdc_layer_desc *desc) > +{ > + /* > + * yuv-to-rgb-conv-factors are now defined from LCDC_HEOCFG16 to > + * LCDC_HEOCFG21 registers in SAM9X7. > + */ > + atmel_hlcdc_layer_write_cfg(&plane->layer, > + desc->layout.csc, > + 0x00000488); > + atmel_hlcdc_layer_write_cfg(&plane->layer, > + desc->layout.csc + 1, > + 0x00000648); > + atmel_hlcdc_layer_write_cfg(&plane->layer, > + desc->layout.csc + 2, > + 0x1EA00480); > + atmel_hlcdc_layer_write_cfg(&plane->layer, > + desc->layout.csc + 3, > + 0x00001D28); > + atmel_hlcdc_layer_write_cfg(&plane->layer, > + desc->layout.csc + 4, > + 0x08100480); > + atmel_hlcdc_layer_write_cfg(&plane->layer, > + desc->layout.csc + 5, > + 0x00000000); > + atmel_hlcdc_layer_write_cfg(&plane->layer, > + desc->layout.csc + 6, > + 0x00000007); > } > Both the above functions can be made more readable/easier to maintain by having the configs in an array and just loop through them. > static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane) > { > const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc; > + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private; > > if (desc->type == ATMEL_HLCDC_OVERLAY_LAYER || > desc->type == ATMEL_HLCDC_CURSOR_LAYER) { > @@ -796,31 +1007,19 @@ static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane) > return ret; > } > > - if (desc->layout.csc) { > - /* > - * TODO: decare a "yuv-to-rgb-conv-factors" property to let > - * userspace modify these factors (using a BLOB property ?). > - */ > - atmel_hlcdc_layer_write_cfg(&plane->layer, > - desc->layout.csc, > - 0x4c900091); > - atmel_hlcdc_layer_write_cfg(&plane->layer, > - desc->layout.csc + 1, > - 0x7a5f5090); > - atmel_hlcdc_layer_write_cfg(&plane->layer, > - desc->layout.csc + 2, > - 0x40040890); > - } Same as above. > + if (dc->desc->is_xlcdc && desc->layout.csc) > + xlcdc_csc_init(plane, desc); > + else > + if (desc->layout.csc) > + hlcdc_csc_init(plane, desc); > > return 0; > } > > -void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane) > +void hlcdc_irq_dbg(struct atmel_hlcdc_plane *plane, > + const struct atmel_hlcdc_layer_desc *desc) > { > - const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc; > - u32 isr; > - > - isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR); > + u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR); > > /* > * There's not much we can do in case of overrun except informing > @@ -834,6 +1033,34 @@ void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane) > desc->name); > } > > +void xlcdc_irq_dbg(struct atmel_hlcdc_plane *plane, > + const struct atmel_hlcdc_layer_desc *desc) > +{ > + u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR); > + > + /* > + * There's not much we can do in case of overrun except informing > + * the user. However, we are in interrupt context here, hence the > + * use of dev_dbg(). > + */ > + if (isr & > + (ATMEL_XLCDC_LAYER_OVR_IRQ(0) | ATMEL_XLCDC_LAYER_OVR_IRQ(1) | > + ATMEL_XLCDC_LAYER_OVR_IRQ(2))) > + dev_dbg(plane->base.dev->dev, "overrun on plane %s\n", > + desc->name); use pr_warn() instead. > +} > + > +void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane) > +{ > + const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc; > + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private; > + > + if (dc->desc->is_xlcdc) > + xlcdc_irq_dbg(plane, desc); > + else > + hlcdc_irq_dbg(plane, desc); > +} > + > static const struct drm_plane_helper_funcs atmel_hlcdc_layer_plane_helper_funcs = { > .atomic_check = atmel_hlcdc_plane_atomic_check, > .atomic_update = atmel_hlcdc_plane_atomic_update,
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c index 58184cd6ab0b..27f86cea8bff 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c @@ -139,10 +139,10 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c) state = drm_crtc_state_to_atmel_hlcdc_crtc_state(c->state); cfg = state->output_mode << 8; - if (adj->flags & DRM_MODE_FLAG_NVSYNC) + if (!crtc->dc->desc->is_xlcdc && (adj->flags & DRM_MODE_FLAG_NVSYNC)) cfg |= ATMEL_HLCDC_VSPOL; - if (adj->flags & DRM_MODE_FLAG_NHSYNC) + if (!crtc->dc->desc->is_xlcdc && (adj->flags & DRM_MODE_FLAG_NHSYNC)) cfg |= ATMEL_HLCDC_HSPOL; regmap_update_bits(regmap, ATMEL_HLCDC_CFG(5), @@ -177,6 +177,20 @@ static void atmel_hlcdc_crtc_atomic_disable(struct drm_crtc *c, pm_runtime_get_sync(dev->dev); + if (crtc->dc->desc->is_xlcdc) { + regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_CM); + if (!regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status, + !(status & ATMEL_XLCDC_CM), 10, + 0)) + cpu_relax(); + + regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_SD); + if (!regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status, + status & ATMEL_XLCDC_SD, 10, + 0)) + cpu_relax(); + } + regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_DISP); while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) && (status & ATMEL_HLCDC_DISP)) @@ -231,6 +245,20 @@ static void atmel_hlcdc_crtc_atomic_enable(struct drm_crtc *c, !(status & ATMEL_HLCDC_DISP)) cpu_relax(); + if (crtc->dc->desc->is_xlcdc) { + regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_CM); + if (!regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status, + status & ATMEL_XLCDC_CM, 10, + 0)) + cpu_relax(); + + regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_SD); + if (!regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status, + !(status & ATMEL_XLCDC_SD), 10, + 0)) + cpu_relax(); + } + pm_runtime_put_sync(dev->dev); } diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c index daa508504f47..81f103b1a51f 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c @@ -330,11 +330,59 @@ static void atmel_hlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane, yfactor)); } +static void atmel_xlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane, + struct atmel_hlcdc_plane_state *state) +{ + const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc; + u32 xfactor, yfactor; + + if (!desc->layout.scaler_config) + return; + + if (state->crtc_w == state->src_w && state->crtc_h == state->src_h) { + atmel_hlcdc_layer_write_cfg(&plane->layer, + desc->layout.scaler_config, 0); + return; + } + + /* xfactor = round[(2^20 * XMEMSIZE)/XSIZE)] */ + xfactor = (1048576 * state->src_w) / state->crtc_w; + + /* yfactor = round[(2^20 * YMEMSIZE)/YSIZE)] */ + yfactor = (1048576 * state->src_h) / state->crtc_h; + + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config, + ATMEL_XLCDC_LAYER_VSCALER_LUMA_ENABLE | + ATMEL_XLCDC_LAYER_VSCALER_CHROMA_ENABLE | + ATMEL_XLCDC_LAYER_HSCALER_LUMA_ENABLE | + ATMEL_XLCDC_LAYER_HSCALER_CHROMA_ENABLE); + + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 1, + yfactor); + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 3, + xfactor); + + /* As per YCbCr window resampling configuration */ + if (state->base.fb->format->format == DRM_FORMAT_YUV420) { + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 2, + yfactor / 2); + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 4, + xfactor / 2); + } else { + /* As per ARGB window resampling configuration */ + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 2, + yfactor); + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 4, + xfactor); + } +} + static void atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane, struct atmel_hlcdc_plane_state *state) { const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc; + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private; if (desc->layout.size) atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.size, @@ -352,7 +400,10 @@ atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane, ATMEL_HLCDC_LAYER_POS(state->crtc_x, state->crtc_y)); - atmel_hlcdc_plane_setup_scaler(plane, state); + if (dc->desc->is_xlcdc) + atmel_xlcdc_plane_setup_scaler(plane, state); + else + atmel_hlcdc_plane_setup_scaler(plane, state); } static void @@ -393,6 +444,40 @@ atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane, cfg); } +static void +atmel_xlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane, + struct atmel_hlcdc_plane_state *state) +{ + unsigned int cfg; + const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc; + const struct drm_format_info *format = state->base.fb->format; + + atmel_hlcdc_layer_write_cfg(&plane->layer, ATMEL_XLCDC_LAYER_DMA_CFG, + ATMEL_HLCDC_LAYER_DMA_BLEN_INCR16 | state->ahb_id); + + cfg = ATMEL_XLCDC_LAYER_DMA | ATMEL_XLCDC_LAYER_REP; + + if (plane->base.type != DRM_PLANE_TYPE_PRIMARY) { + /* + * Alpha Blending bits specific to SAM9X7 SoC + */ + cfg |= ATMEL_XLCDC_LAYER_SFACTC_A0_MULT_AS | + ATMEL_XLCDC_LAYER_SFACTA_ONE | + ATMEL_XLCDC_LAYER_DFACTC_M_A0_MULT_AS | + ATMEL_XLCDC_LAYER_DFACTA_ONE; + if (format->has_alpha) + cfg |= ATMEL_XLCDC_LAYER_A0(0xff); + else + cfg |= ATMEL_XLCDC_LAYER_A0(state->base.alpha); + } + + if (state->disc_h && state->disc_w) + cfg |= ATMEL_XLCDC_LAYER_DISCEN; + + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.general_config, + cfg); +} + static void atmel_hlcdc_plane_update_format(struct atmel_hlcdc_plane *plane, struct atmel_hlcdc_plane_state *state) { @@ -437,36 +522,55 @@ static void atmel_hlcdc_plane_update_clut(struct atmel_hlcdc_plane *plane, } } +static void update_hlcdc_buffers(struct atmel_hlcdc_plane *plane, + struct atmel_hlcdc_plane_state *state, u32 sr, int i) +{ + atmel_hlcdc_layer_write_reg(&plane->layer, + ATMEL_HLCDC_LAYER_PLANE_HEAD(i), + state->dscrs[i]->self); + + if (!(sr & ATMEL_HLCDC_LAYER_EN)) { + atmel_hlcdc_layer_write_reg(&plane->layer, + ATMEL_HLCDC_LAYER_PLANE_ADDR(i), + state->dscrs[i]->addr); + atmel_hlcdc_layer_write_reg(&plane->layer, + ATMEL_HLCDC_LAYER_PLANE_CTRL(i), + state->dscrs[i]->ctrl); + atmel_hlcdc_layer_write_reg(&plane->layer, + ATMEL_HLCDC_LAYER_PLANE_NEXT(i), + state->dscrs[i]->self); + } +} + +static void update_xlcdc_buffers(struct atmel_hlcdc_plane *plane, + struct atmel_hlcdc_plane_state *state, int i) +{ + atmel_hlcdc_layer_write_reg(&plane->layer, + ATMEL_XLCDC_LAYER_PLANE_ADDR(i), + state->dscrs[i]->addr); +} + static void atmel_hlcdc_plane_update_buffers(struct atmel_hlcdc_plane *plane, - struct atmel_hlcdc_plane_state *state) + struct atmel_hlcdc_plane_state *state) { const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc; + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private; struct drm_framebuffer *fb = state->base.fb; u32 sr; int i; - sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR); + if (!dc->desc->is_xlcdc) + sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR); for (i = 0; i < state->nplanes; i++) { struct drm_gem_dma_object *gem = drm_fb_dma_get_gem_obj(fb, i); state->dscrs[i]->addr = gem->dma_addr + state->offsets[i]; - atmel_hlcdc_layer_write_reg(&plane->layer, - ATMEL_HLCDC_LAYER_PLANE_HEAD(i), - state->dscrs[i]->self); - - if (!(sr & ATMEL_HLCDC_LAYER_EN)) { - atmel_hlcdc_layer_write_reg(&plane->layer, - ATMEL_HLCDC_LAYER_PLANE_ADDR(i), - state->dscrs[i]->addr); - atmel_hlcdc_layer_write_reg(&plane->layer, - ATMEL_HLCDC_LAYER_PLANE_CTRL(i), - state->dscrs[i]->ctrl); - atmel_hlcdc_layer_write_reg(&plane->layer, - ATMEL_HLCDC_LAYER_PLANE_NEXT(i), - state->dscrs[i]->self); - } + if (dc->desc->is_xlcdc) + update_xlcdc_buffers(plane, state, i); + else + update_hlcdc_buffers(plane, state, sr, i); if (desc->layout.xstride[i]) atmel_hlcdc_layer_write_cfg(&plane->layer, @@ -712,11 +816,8 @@ static int atmel_hlcdc_plane_atomic_check(struct drm_plane *p, return 0; } -static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p, - struct drm_atomic_state *state) +static void hlcdc_atomic_disable(struct atmel_hlcdc_plane *plane) { - struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p); - /* Disable interrupts */ atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IDR, 0xffffffff); @@ -731,6 +832,72 @@ static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p, atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR); } +static void xlcdc_atomic_disable(struct atmel_hlcdc_plane *plane) +{ + /* Disable interrupts */ + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IDR, + 0xffffffff); + + /* Disable the layer */ + atmel_hlcdc_layer_write_reg(&plane->layer, + ATMEL_XLCDC_LAYER_ENR, 0); + + /* Clear all pending interrupts */ + atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR); +} + +static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p, + struct drm_atomic_state *state) +{ + struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p); + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private; + + if (dc->desc->is_xlcdc) + xlcdc_atomic_disable(plane); + else + hlcdc_atomic_disable(plane); +} + +static void hlcdc_atomic_update(struct atmel_hlcdc_plane *plane) +{ + u32 sr; + + /* Enable the overrun interrupts. */ + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER, + ATMEL_HLCDC_LAYER_OVR_IRQ(0) | + ATMEL_HLCDC_LAYER_OVR_IRQ(1) | + ATMEL_HLCDC_LAYER_OVR_IRQ(2)); + + /* Apply the new config at the next SOF event. */ + sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR); + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER, + ATMEL_HLCDC_LAYER_UPDATE | + (sr & ATMEL_HLCDC_LAYER_EN ? + ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN)); +} + +static void xlcdc_atomic_update(struct atmel_hlcdc_plane *plane, + struct atmel_hlcdc_dc *dc) +{ + /* Enable the overrun interrupts. */ + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IER, + ATMEL_XLCDC_LAYER_OVR_IRQ(0) | + ATMEL_XLCDC_LAYER_OVR_IRQ(1) | + ATMEL_XLCDC_LAYER_OVR_IRQ(2)); + + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_ENR, + ATMEL_XLCDC_LAYER_EN); + + /* + * Updating XLCDC_xxxCFGx, XLCDC_xxxFBA and XLCDC_xxxEN, + * (where xxx indicates each layer) requires writing one to the + * Update Attribute field for each layer in LCDC_ATTRE register for SAM9X7. + */ + regmap_write(dc->hlcdc->regmap, ATMEL_XLCDC_ATTRE, ATMEL_XLCDC_BASE_UPDATE | + ATMEL_XLCDC_OVR1_UPDATE | ATMEL_XLCDC_OVR3_UPDATE | + ATMEL_XLCDC_HEO_UPDATE); +} + static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p, struct drm_atomic_state *state) { @@ -739,7 +906,7 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p, struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p); struct atmel_hlcdc_plane_state *hstate = drm_plane_state_to_atmel_hlcdc_plane_state(new_s); - u32 sr; + struct atmel_hlcdc_dc *dc = p->dev->dev_private; if (!new_s->crtc || !new_s->fb) return; @@ -750,29 +917,73 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p, } atmel_hlcdc_plane_update_pos_and_size(plane, hstate); - atmel_hlcdc_plane_update_general_settings(plane, hstate); + if (dc->desc->is_xlcdc) + atmel_xlcdc_plane_update_general_settings(plane, hstate); + else + atmel_hlcdc_plane_update_general_settings(plane, hstate); atmel_hlcdc_plane_update_format(plane, hstate); atmel_hlcdc_plane_update_clut(plane, hstate); atmel_hlcdc_plane_update_buffers(plane, hstate); atmel_hlcdc_plane_update_disc_area(plane, hstate); - /* Enable the overrun interrupts. */ - atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER, - ATMEL_HLCDC_LAYER_OVR_IRQ(0) | - ATMEL_HLCDC_LAYER_OVR_IRQ(1) | - ATMEL_HLCDC_LAYER_OVR_IRQ(2)); + if (dc->desc->is_xlcdc) + xlcdc_atomic_update(plane, dc); + else + hlcdc_atomic_update(plane); +} - /* Apply the new config at the next SOF event. */ - sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR); - atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER, - ATMEL_HLCDC_LAYER_UPDATE | - (sr & ATMEL_HLCDC_LAYER_EN ? - ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN)); +static void hlcdc_csc_init(struct atmel_hlcdc_plane *plane, + const struct atmel_hlcdc_layer_desc *desc) +{ + /* + * TODO: declare a "yuv-to-rgb-conv-factors" property to let + * userspace modify these factors (using a BLOB property ?). + */ + atmel_hlcdc_layer_write_cfg(&plane->layer, + desc->layout.csc, + 0x4c900091); + atmel_hlcdc_layer_write_cfg(&plane->layer, + desc->layout.csc + 1, + 0x7a5f5090); + atmel_hlcdc_layer_write_cfg(&plane->layer, + desc->layout.csc + 2, + 0x40040890); +} + +static void xlcdc_csc_init(struct atmel_hlcdc_plane *plane, + const struct atmel_hlcdc_layer_desc *desc) +{ + /* + * yuv-to-rgb-conv-factors are now defined from LCDC_HEOCFG16 to + * LCDC_HEOCFG21 registers in SAM9X7. + */ + atmel_hlcdc_layer_write_cfg(&plane->layer, + desc->layout.csc, + 0x00000488); + atmel_hlcdc_layer_write_cfg(&plane->layer, + desc->layout.csc + 1, + 0x00000648); + atmel_hlcdc_layer_write_cfg(&plane->layer, + desc->layout.csc + 2, + 0x1EA00480); + atmel_hlcdc_layer_write_cfg(&plane->layer, + desc->layout.csc + 3, + 0x00001D28); + atmel_hlcdc_layer_write_cfg(&plane->layer, + desc->layout.csc + 4, + 0x08100480); + atmel_hlcdc_layer_write_cfg(&plane->layer, + desc->layout.csc + 5, + 0x00000000); + atmel_hlcdc_layer_write_cfg(&plane->layer, + desc->layout.csc + 6, + 0x00000007); } static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane) { const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc; + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private; if (desc->type == ATMEL_HLCDC_OVERLAY_LAYER || desc->type == ATMEL_HLCDC_CURSOR_LAYER) { @@ -796,31 +1007,19 @@ static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane) return ret; } - if (desc->layout.csc) { - /* - * TODO: decare a "yuv-to-rgb-conv-factors" property to let - * userspace modify these factors (using a BLOB property ?). - */ - atmel_hlcdc_layer_write_cfg(&plane->layer, - desc->layout.csc, - 0x4c900091); - atmel_hlcdc_layer_write_cfg(&plane->layer, - desc->layout.csc + 1, - 0x7a5f5090); - atmel_hlcdc_layer_write_cfg(&plane->layer, - desc->layout.csc + 2, - 0x40040890); - } + if (dc->desc->is_xlcdc && desc->layout.csc) + xlcdc_csc_init(plane, desc); + else + if (desc->layout.csc) + hlcdc_csc_init(plane, desc); return 0; } -void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane) +void hlcdc_irq_dbg(struct atmel_hlcdc_plane *plane, + const struct atmel_hlcdc_layer_desc *desc) { - const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc; - u32 isr; - - isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR); + u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR); /* * There's not much we can do in case of overrun except informing @@ -834,6 +1033,34 @@ void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane) desc->name); } +void xlcdc_irq_dbg(struct atmel_hlcdc_plane *plane, + const struct atmel_hlcdc_layer_desc *desc) +{ + u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR); + + /* + * There's not much we can do in case of overrun except informing + * the user. However, we are in interrupt context here, hence the + * use of dev_dbg(). + */ + if (isr & + (ATMEL_XLCDC_LAYER_OVR_IRQ(0) | ATMEL_XLCDC_LAYER_OVR_IRQ(1) | + ATMEL_XLCDC_LAYER_OVR_IRQ(2))) + dev_dbg(plane->base.dev->dev, "overrun on plane %s\n", + desc->name); +} + +void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane) +{ + const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc; + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private; + + if (dc->desc->is_xlcdc) + xlcdc_irq_dbg(plane, desc); + else + hlcdc_irq_dbg(plane, desc); +} + static const struct drm_plane_helper_funcs atmel_hlcdc_layer_plane_helper_funcs = { .atomic_check = atmel_hlcdc_plane_atomic_check, .atomic_update = atmel_hlcdc_plane_atomic_update,