From patchwork Mon Jul 17 17:26:51 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sebastian Reichel X-Patchwork-Id: 13316527 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org From: Sebastian Reichel Subject: [PATCH v3 5/5] arm64: dts: rockchip: rk3588: add PCIe2 support Date: Mon, 17 Jul 2023 19:26:51 +0200 Message-Id: <20230717172651.64324-6-sebastian.reichel@collabora.com> In-Reply-To: <20230717172651.64324-1-sebastian.reichel@collabora.com> References: <20230717172651.64324-1-sebastian.reichel@collabora.com> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+lwn-linux-arm-kernel=archive.lwn.net@lists.infradead.org List-Archive: To: linux-pci@vger.kernel.org, linux-rockchip@lists.infradead.org, Serge Semin Cc: Jingoo Han , Gustavo Pimentel , Bjorn Helgaas , Lorenzo Pieralisi , =?utf-8?q?Krzysztof_Wilczy=C5=84?= =?utf-8?q?ski?= , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Heiko Stuebner , Shawn Lin , Simon Xue , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Sebastian Reichel , kernel@collabora.com, Kever Yang , Jagan Teki Add all three PCIe2 IP blocks to the RK3588 DT. Note, that RK3588 also has two PCIe3 IP blocks, that will be handled separately. Co-developed-by: Kever Yang Signed-off-by: Kever Yang Tested-by: Jagan Teki # edgeble-neu6a, 6b Reviewed-by: Jagan Teki Signed-off-by: Sebastian Reichel --- arch/arm64/boot/dts/rockchip/rk3588.dtsi | 51 +++++++++++ arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 102 ++++++++++++++++++++++ 2 files changed, 153 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi index 6be9bf81c09c..88d702575db2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi @@ -80,6 +80,57 @@ i2s10_8ch: i2s@fde00000 { status = "disabled"; }; + pcie2x1l0: pcie@fe170000 { + compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x20 0x2f>; + clocks = <&cru ACLK_PCIE_1L0_MSTR>, <&cru ACLK_PCIE_1L0_SLV>, + <&cru ACLK_PCIE_1L0_DBI>, <&cru PCLK_PCIE_1L0>, + <&cru CLK_PCIE_AUX2>, <&cru CLK_PCIE1L0_PIPE>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux", "pipe"; + device_type = "pci"; + interrupts = , + , + , + , + ; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2x1l0_intc 0>, + <0 0 0 2 &pcie2x1l0_intc 1>, + <0 0 0 3 &pcie2x1l0_intc 2>, + <0 0 0 4 &pcie2x1l0_intc 3>; + linux,pci-domain = <2>; + max-link-speed = <2>; + msi-map = <0x2000 &its0 0x2000 0x1000>; + num-lanes = <1>; + phys = <&combphy1_ps PHY_TYPE_PCIE>; + phy-names = "pcie-phy"; + power-domains = <&power RK3588_PD_PCIE>; + ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>, + <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x00e00000>, + <0x03000000 0x0 0x40000000 0x9 0x80000000 0x0 0x40000000>; + reg = <0xa 0x40800000 0x0 0x00400000>, + <0x0 0xfe170000 0x0 0x00010000>, + <0x0 0xf2000000 0x0 0x00100000>; + reg-names = "dbi", "apb", "config"; + resets = <&cru SRST_PCIE2_POWER_UP>, <&cru SRST_P_PCIE2>; + reset-names = "pwr", "pipe"; + status = "disabled"; + + pcie2x1l0_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = ; + }; + }; + gmac0: ethernet@fe1b0000 { compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; reg = <0x0 0xfe1b0000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi index c9f9dd2472f5..b9b509257aaa 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi @@ -1227,6 +1227,108 @@ qos_vop_m1: qos@fdf82200 { reg = <0x0 0xfdf82200 0x0 0x20>; }; + pcie2x1l1: pcie@fe180000 { + compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x30 0x3f>; + clocks = <&cru ACLK_PCIE_1L1_MSTR>, <&cru ACLK_PCIE_1L1_SLV>, + <&cru ACLK_PCIE_1L1_DBI>, <&cru PCLK_PCIE_1L1>, + <&cru CLK_PCIE_AUX3>, <&cru CLK_PCIE1L1_PIPE>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux", "pipe"; + device_type = "pci"; + interrupts = , + , + , + , + ; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2x1l1_intc 0>, + <0 0 0 2 &pcie2x1l1_intc 1>, + <0 0 0 3 &pcie2x1l1_intc 2>, + <0 0 0 4 &pcie2x1l1_intc 3>; + linux,pci-domain = <3>; + max-link-speed = <2>; + msi-map = <0x3000 &its0 0x3000 0x1000>; + num-lanes = <1>; + phys = <&combphy2_psu PHY_TYPE_PCIE>; + phy-names = "pcie-phy"; + power-domains = <&power RK3588_PD_PCIE>; + ranges = <0x01000000 0x0 0xf3100000 0x0 0xf3100000 0x0 0x00100000>, + <0x02000000 0x0 0xf3200000 0x0 0xf3200000 0x0 0x00e00000>, + <0x03000000 0x0 0x40000000 0x9 0xc0000000 0x0 0x40000000>; + reg = <0xa 0x40c00000 0x0 0x00400000>, + <0x0 0xfe180000 0x0 0x00010000>, + <0x0 0xf3000000 0x0 0x00100000>; + reg-names = "dbi", "apb", "config"; + resets = <&cru SRST_PCIE3_POWER_UP>, <&cru SRST_P_PCIE3>; + reset-names = "pwr", "pipe"; + status = "disabled"; + + pcie2x1l1_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = ; + }; + }; + + pcie2x1l2: pcie@fe190000 { + compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x40 0x4f>; + clocks = <&cru ACLK_PCIE_1L2_MSTR>, <&cru ACLK_PCIE_1L2_SLV>, + <&cru ACLK_PCIE_1L2_DBI>, <&cru PCLK_PCIE_1L2>, + <&cru CLK_PCIE_AUX4>, <&cru CLK_PCIE1L2_PIPE>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux", "pipe"; + device_type = "pci"; + interrupts = , + , + , + , + ; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2x1l2_intc 0>, + <0 0 0 2 &pcie2x1l2_intc 1>, + <0 0 0 3 &pcie2x1l2_intc 2>, + <0 0 0 4 &pcie2x1l2_intc 3>; + linux,pci-domain = <4>; + max-link-speed = <2>; + msi-map = <0x4000 &its0 0x4000 0x1000>; + num-lanes = <1>; + phys = <&combphy0_ps PHY_TYPE_PCIE>; + phy-names = "pcie-phy"; + power-domains = <&power RK3588_PD_PCIE>; + ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>, + <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x00e00000>, + <0x03000000 0x0 0x40000000 0xa 0x00000000 0x0 0x40000000>; + reg = <0xa 0x41000000 0x0 0x00400000>, + <0x0 0xfe190000 0x0 0x00010000>, + <0x0 0xf4000000 0x0 0x00100000>; + reg-names = "dbi", "apb", "config"; + resets = <&cru SRST_PCIE4_POWER_UP>, <&cru SRST_P_PCIE4>; + reset-names = "pwr", "pipe"; + status = "disabled"; + + pcie2x1l2_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = ; + }; + }; + gmac1: ethernet@fe1c0000 { compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; reg = <0x0 0xfe1c0000 0x0 0x10000>;