diff mbox series

[v2] ARM: dts: bcm28155-ap: use node labels

Message ID 20230718165319.GA5179@standask-GA-A55M-S2HP (mailing list archive)
State New, archived
Headers show
Series [v2] ARM: dts: bcm28155-ap: use node labels | expand

Commit Message

Stanislav Jakubek July 18, 2023, 4:53 p.m. UTC
Use node labels instead of nodename@address for BCM28155 AP board
to simplify its DTS file.

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
---
Changes in V2:
  - keep &pmu (bcm59056) related stuff last in the file
  - drop already applied patches
  - drop cover letter (since this is now a single patch)

V1 - https://lore.kernel.org/lkml/cover.1685127525.git.stano.jakubek@gmail.com/

 arch/arm/boot/dts/broadcom/bcm28155-ap.dts | 94 +++++++++++-----------
 1 file changed, 47 insertions(+), 47 deletions(-)

Comments

Florian Fainelli July 21, 2023, 5:07 p.m. UTC | #1
From: Florian Fainelli <f.fainelli@gmail.com>

On Tue, 18 Jul 2023 18:53:19 +0200, Stanislav Jakubek <stano.jakubek@gmail.com> wrote:
> Use node labels instead of nodename@address for BCM28155 AP board
> to simplify its DTS file.
> 
> Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/broadcom/bcm28155-ap.dts b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
index 0a8ad1d673d8..2f3634545e64 100644
--- a/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
@@ -15,64 +15,64 @@  memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
+};
 
-	serial@3e000000 {
-		status = "okay";
-	};
-
-	i2c@3e016000 {
-		clock-frequency = <400000>;
-		status = "okay";
-	};
+&bsc1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
 
-	i2c@3e017000 {
-		clock-frequency = <400000>;
-		status = "okay";
-	};
+&bsc2 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
 
-	i2c@3e018000 {
-		clock-frequency = <400000>;
-		status = "okay";
-	};
+&bsc3 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
 
-	i2c@3500d000 {
-		clock-frequency = <100000>;
-		status = "okay";
+&pmu_bsc {
+	clock-frequency = <100000>;
+	status = "okay";
 
-		pmu: pmu@8 {
-			reg = <0x08>;
-		};
+	pmu: pmu@8 {
+		reg = <0x08>;
 	};
+};
 
-	sdio2: mmc@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		vmmc-supply = <&camldo1_reg>;
-		vqmmc-supply = <&iosr1_reg>;
-		status = "okay";
-	};
+&pwm {
+	status = "okay";
+};
 
-	sdio4: mmc@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		vmmc-supply = <&sdldo_reg>;
-		vqmmc-supply = <&sdxldo_reg>;
-		status = "okay";
-	};
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	vmmc-supply = <&camldo1_reg>;
+	vqmmc-supply = <&iosr1_reg>;
+	status = "okay";
+};
 
-	pwm: pwm@3e01a000 {
-		status = "okay";
-	};
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&sdldo_reg>;
+	vqmmc-supply = <&sdxldo_reg>;
+	status = "okay";
+};
 
-	usbotg: usb@3f120000 {
-		vusb_d-supply = <&usbldo_reg>;
-		vusb_a-supply = <&iosr1_reg>;
-		status = "okay";
-	};
+&uartb {
+	status = "okay";
+};
 
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
+&usbotg {
+	vusb_d-supply = <&usbldo_reg>;
+	vusb_a-supply = <&iosr1_reg>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
 };
 
 #include "bcm59056.dtsi"