diff mbox series

[net-next,v4,1/3] dt-bindings: net: snps,dwmac: add phy-supply support

Message ID 20230721110345.3925719-1-m.felsch@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series [net-next,v4,1/3] dt-bindings: net: snps,dwmac: add phy-supply support | expand

Commit Message

Marco Felsch July 21, 2023, 11:03 a.m. UTC
Document the common phy-supply property to be able to specify a phy
regulator.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changelog:
v4:
- no changes
v3:
- no changes
v2
- add ack-by

 Documentation/devicetree/bindings/net/snps,dwmac.yaml | 3 +++
 1 file changed, 3 insertions(+)

Comments

Rob Herring (Arm) July 21, 2023, 2:24 p.m. UTC | #1
On Fri, Jul 21, 2023 at 01:03:43PM +0200, Marco Felsch wrote:
> Document the common phy-supply property to be able to specify a phy
> regulator.

What common property? I don't see any such property in 
ethernet-controller.yaml.

> 
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> Changelog:
> v4:
> - no changes
> v3:
> - no changes
> v2
> - add ack-by
> 
>  Documentation/devicetree/bindings/net/snps,dwmac.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> index ddf9522a5dc23..847ecb82b37ee 100644
> --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> @@ -160,6 +160,9 @@ properties:
>        can be passive (no SW requirement), and requires that the MAC operate
>        in a different mode than the PHY in order to function.
>  
> +  phy-supply:
> +    description: PHY regulator

Is this for an serdes, sgmii, etc. type phy or ethernet phy? Either way, 
this property belongs in the PHY's node because it is the PHY that has 
supply connection. I'm guessing you put this here for the latter case 
because ethernet PHYs on MDIO are "discoverable" except for the small 
problem that powering them on is not discoverable. 

Rob
Marco Felsch Aug. 9, 2023, 9:01 a.m. UTC | #2
Hi Rob,

On 23-07-24, Marco Felsch wrote:
> Hi Rob,
> 
> On 23-07-21, Rob Herring wrote:
> > On Fri, Jul 21, 2023 at 01:03:43PM +0200, Marco Felsch wrote:
> > > Document the common phy-supply property to be able to specify a phy
> > > regulator.
> > 
> > What common property? I don't see any such property in 
> > ethernet-controller.yaml.
> 
> Not in ethernet-controller.yaml but there are at least a few user of
> this binding:
>  - allwinner,sun4i-a10-mdio.yaml
>  - allwinner,sun7i-a20-gmac.yaml
>  - allwinner,sun8i-a83t-emac.yaml
>  - fsl,fec.yaml
>  - rockchip-dwmac.yaml
>  - rockchip,emac.yaml
> 
> Also there is no <vendor>,phy-supply nor <ip-vendor>,phy-supply,
> therefore I thought this is common.

any further comments else I would like to gentle ping this series.

Regards,
  Marco

> > > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> > > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > > ---
> > > Changelog:
> > > v4:
> > > - no changes
> > > v3:
> > > - no changes
> > > v2
> > > - add ack-by
> > > 
> > >  Documentation/devicetree/bindings/net/snps,dwmac.yaml | 3 +++
> > >  1 file changed, 3 insertions(+)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > > index ddf9522a5dc23..847ecb82b37ee 100644
> > > --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > > +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > > @@ -160,6 +160,9 @@ properties:
> > >        can be passive (no SW requirement), and requires that the MAC operate
> > >        in a different mode than the PHY in order to function.
> > >  
> > > +  phy-supply:
> > > +    description: PHY regulator
> > 
> > Is this for an serdes, sgmii, etc. type phy or ethernet phy? Either way, 
> > this property belongs in the PHY's node because it is the PHY that has 
> > supply connection. I'm guessing you put this here for the latter case 
> > because ethernet PHYs on MDIO are "discoverable" except for the small 
> > problem that powering them on is not discoverable. 
> 
> All kind of ethernet phys connected to you etherent MAC which need to be
> power controlled by software. You're right this sould belong to the PHY
> node (as Krzysztof already mentioned) but this isn't the case yet. As
> you can see there are at least 6 user of the exact same binding.
> 
> Regards,
>   Marco
> 
>
Marco Felsch Aug. 29, 2023, 11:02 a.m. UTC | #3
Hi,

gentle ping on this series.

On 23-07-21, Marco Felsch wrote:
> Document the common phy-supply property to be able to specify a phy
> regulator.
> 
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> Changelog:
> v4:
> - no changes
> v3:
> - no changes
> v2
> - add ack-by
> 
>  Documentation/devicetree/bindings/net/snps,dwmac.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> index ddf9522a5dc23..847ecb82b37ee 100644
> --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> @@ -160,6 +160,9 @@ properties:
>        can be passive (no SW requirement), and requires that the MAC operate
>        in a different mode than the PHY in order to function.
>  
> +  phy-supply:
> +    description: PHY regulator
> +
>    snps,axi-config:
>      $ref: /schemas/types.yaml#/definitions/phandle
>      description:
> -- 
> 2.39.2
> 
> 
>
Marco Felsch Sept. 18, 2023, 6:42 a.m. UTC | #4
Hi,

On 23-08-29, Marco Felsch wrote:
> 
> Hi,
> 
> gentle ping on this series.

ping++

> On 23-07-21, Marco Felsch wrote:
> > Document the common phy-supply property to be able to specify a phy
> > regulator.
> > 
> > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > ---
> > Changelog:
> > v4:
> > - no changes
> > v3:
> > - no changes
> > v2
> > - add ack-by
> > 
> >  Documentation/devicetree/bindings/net/snps,dwmac.yaml | 3 +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > index ddf9522a5dc23..847ecb82b37ee 100644
> > --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > @@ -160,6 +160,9 @@ properties:
> >        can be passive (no SW requirement), and requires that the MAC operate
> >        in a different mode than the PHY in order to function.
> >  
> > +  phy-supply:
> > +    description: PHY regulator
> > +
> >    snps,axi-config:
> >      $ref: /schemas/types.yaml#/definitions/phandle
> >      description:
> > -- 
> > 2.39.2
> > 
> > 
> > 
> 
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index ddf9522a5dc23..847ecb82b37ee 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -160,6 +160,9 @@  properties:
       can be passive (no SW requirement), and requires that the MAC operate
       in a different mode than the PHY in order to function.
 
+  phy-supply:
+    description: PHY regulator
+
   snps,axi-config:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: