diff mbox series

[v3,27/50] dt-bindings: usb: atmel: add sam9x7

Message ID 20230728102753.266660-1-varshini.rajendran@microchip.com (mailing list archive)
State New, archived
Headers show
Series [v3,01/50] dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x60, sam9x7 compatible | expand

Commit Message

Varshini Rajendran July 28, 2023, 10:27 a.m. UTC
Add sam9x7 bindings.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
---
 Documentation/devicetree/bindings/usb/atmel-usb.txt | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

Comments

Krzysztof Kozlowski July 28, 2023, 4:42 p.m. UTC | #1
On 28/07/2023 12:27, Varshini Rajendran wrote:
> Add sam9x7 bindings.
> 
> Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
> ---
>  Documentation/devicetree/bindings/usb/atmel-usb.txt | 11 +++++++----
>  1 file changed, 7 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
> index 12183ef47ee4..82bd0dbc2a48 100644
> --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
> +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
> @@ -3,8 +3,9 @@ Atmel SOC USB controllers
>  OHCI
>  
>  Required properties:
> - - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
> -   used in host mode.
> + - compatible: Should be "atmel,at91rm9200-ohci" or
> +   "microchip,sam9x7-ohci", "atmel,at91rm9200-ohci"
> +   for USB controllers used in host mode.
>   - reg: Address and length of the register set for the device
>   - interrupts: Should contain ohci interrupt
>   - clocks: Should reference the peripheral, host and system clocks
> @@ -30,8 +31,9 @@ usb0: ohci@500000 {
>  EHCI
>  
>  Required properties:
> - - compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers
> -   used in host mode.
> + - compatible: Should be "atmel,at91sam9g45-ehci" or
> +   "microchip,sam9x7-ehci", "atmel,at91sam9g45-ehci"

This confuses me. Isn't microchip,sam9x7-ehci already described in EHCI
bindings?

Best regards,
Krzysztof
Rob Herring July 28, 2023, 7:15 p.m. UTC | #2
On Fri, Jul 28, 2023 at 06:42:53PM +0200, Krzysztof Kozlowski wrote:
> On 28/07/2023 12:27, Varshini Rajendran wrote:
> > Add sam9x7 bindings.
> > 
> > Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
> > ---
> >  Documentation/devicetree/bindings/usb/atmel-usb.txt | 11 +++++++----
> >  1 file changed, 7 insertions(+), 4 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
> > index 12183ef47ee4..82bd0dbc2a48 100644
> > --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
> > +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
> > @@ -3,8 +3,9 @@ Atmel SOC USB controllers
> >  OHCI
> >  
> >  Required properties:
> > - - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
> > -   used in host mode.
> > + - compatible: Should be "atmel,at91rm9200-ohci" or
> > +   "microchip,sam9x7-ohci", "atmel,at91rm9200-ohci"
> > +   for USB controllers used in host mode.
> >   - reg: Address and length of the register set for the device
> >   - interrupts: Should contain ohci interrupt
> >   - clocks: Should reference the peripheral, host and system clocks
> > @@ -30,8 +31,9 @@ usb0: ohci@500000 {
> >  EHCI
> >  
> >  Required properties:
> > - - compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers
> > -   used in host mode.
> > + - compatible: Should be "atmel,at91sam9g45-ehci" or
> > +   "microchip,sam9x7-ehci", "atmel,at91sam9g45-ehci"
> 
> This confuses me. Isn't microchip,sam9x7-ehci already described in EHCI
> bindings?

The Atmel .dts (including the one in this series) files use usb-ohci and 
usb-ehci compatibles, but they have extra properties (and clocks are 
different IIRC). So they aren't 'generic' and should drop those 
compatibles. There's already warnings generated for this, but obviously 
no one is paying attention.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index 12183ef47ee4..82bd0dbc2a48 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -3,8 +3,9 @@  Atmel SOC USB controllers
 OHCI
 
 Required properties:
- - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
-   used in host mode.
+ - compatible: Should be "atmel,at91rm9200-ohci" or
+   "microchip,sam9x7-ohci", "atmel,at91rm9200-ohci"
+   for USB controllers used in host mode.
  - reg: Address and length of the register set for the device
  - interrupts: Should contain ohci interrupt
  - clocks: Should reference the peripheral, host and system clocks
@@ -30,8 +31,9 @@  usb0: ohci@500000 {
 EHCI
 
 Required properties:
- - compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers
-   used in host mode.
+ - compatible: Should be "atmel,at91sam9g45-ehci" or
+   "microchip,sam9x7-ehci", "atmel,at91sam9g45-ehci"
+   for USB controllers used in host mode.
  - reg: Address and length of the register set for the device
  - interrupts: Should contain ehci interrupt
  - clocks: Should reference the peripheral and the UTMI clocks
@@ -87,6 +89,7 @@  Required properties:
 	       "atmel,at91sam9g45-udc"
 	       "atmel,sama5d3-udc"
 	       "microchip,sam9x60-udc"
+	       "microchip,sam9x7-udc", "microchip,sam9x60-udc"
 	       "microchip,lan9662-udc"
 	       For "microchip,lan9662-udc" the fallback "atmel,sama5d3-udc"
 	       is required.