diff mbox series

[09/13] arm64: dts: ti: k3-j721s2: Enable GPIO nodes at the board level

Message ID 20230802205309.257392-10-afd@ti.com (mailing list archive)
State New, archived
Headers show
Series Another round of K3 DTSI disables | expand

Commit Message

Andrew Davis Aug. 2, 2023, 8:53 p.m. UTC
GPIO nodes defined in the top-level J721s2 SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux and
device information.

Disable the GPIO nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 .../boot/dts/ti/k3-am68-sk-base-board.dts      | 18 ++----------------
 .../dts/ti/k3-j721s2-common-proc-board.dts     | 18 ++++++------------
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi     |  4 ++++
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi      |  2 ++
 4 files changed, 14 insertions(+), 28 deletions(-)

Comments

Dhruva Gole Aug. 7, 2023, 5:34 a.m. UTC | #1
On 03/08/23 02:23, Andrew Davis wrote:
> GPIO nodes defined in the top-level J721s2 SoC dtsi files are incomplete
> and may not be functional unless they are extended with pinmux and
> device information.
> 
> Disable the GPIO nodes in the dtsi files and only enable the ones that
> are actually pinned out on a given board.
> 
> Signed-off-by: Andrew Davis <afd@ti.com>
> ---
>   .../boot/dts/ti/k3-am68-sk-base-board.dts      | 18 ++----------------
>   .../dts/ti/k3-j721s2-common-proc-board.dts     | 18 ++++++------------
>   arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi     |  4 ++++
>   .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi      |  2 ++
>   4 files changed, 14 insertions(+), 28 deletions(-)
> 

Reviewed-by: Dhruva Gole <d-gole@ti.com>

> diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
> index ffca12df0a6da..4c855dffb4cd2 100644
> --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
> @@ -297,31 +297,17 @@ J721S2_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (K26) WKUP_GPIO0_49 */
>   };
>   
>   &main_gpio0 {
> +	status = "okay";
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&rpi_header_gpio0_pins_default>;
>   };
>   
> -&main_gpio2 {
> -	status = "disabled";
> -};
> -
> -&main_gpio4 {
> -	status = "disabled";
> -};
> -
> -&main_gpio6 {
> -	status = "disabled";
> -};
> -
>   &wkup_gpio0 {
> +	status = "okay";
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&mcu_rpi_header_gpio0_pins0_default>, <&mcu_rpi_header_gpio0_pins1_default>;
>   };
>   
> -&wkup_gpio1 {
> -	status = "disabled";
> -};
> -
>   &wkup_uart0 {
>   	status = "reserved";
>   	pinctrl-names = "default";
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> index 3a8e6eb402448..6f248d27a30a4 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> @@ -266,20 +266,14 @@ J721S2_WKUP_IOPAD(0x044, PIN_INPUT, 0) /* (B20) MCU_OSPI1_LBCLKO */
>   	};
>   };
>   
> -&main_gpio2 {
> -	status = "disabled";
> -};
> -
> -&main_gpio4 {
> -	status = "disabled";
> -};
> -
> -&main_gpio6 {
> -	status = "disabled";
> +&main_gpio0 {
> +	status = "okay";
> +	/* default pins */
>   };
>   
> -&wkup_gpio1 {
> -	status = "disabled";
> +&wkup_gpio0 {
> +	status = "okay";
> +	/* default pins */
>   };
>   
>   &wkup_uart0 {
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> index c46079fe4ed6e..0cc8057fce13c 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> @@ -507,6 +507,7 @@ main_gpio0: gpio@600000 {
>   		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
>   		clocks = <&k3_clks 111 0>;
>   		clock-names = "gpio";
> +		status = "disabled";
>   	};
>   
>   	main_gpio2: gpio@610000 {
> @@ -523,6 +524,7 @@ main_gpio2: gpio@610000 {
>   		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
>   		clocks = <&k3_clks 112 0>;
>   		clock-names = "gpio";
> +		status = "disabled";
>   	};
>   
>   	main_gpio4: gpio@620000 {
> @@ -539,6 +541,7 @@ main_gpio4: gpio@620000 {
>   		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
>   		clocks = <&k3_clks 113 0>;
>   		clock-names = "gpio";
> +		status = "disabled";
>   	};
>   
>   	main_gpio6: gpio@630000 {
> @@ -555,6 +558,7 @@ main_gpio6: gpio@630000 {
>   		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
>   		clocks = <&k3_clks 114 0>;
>   		clock-names = "gpio";
> +		status = "disabled";
>   	};
>   
>   	main_i2c0: i2c@2000000 {
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> index 736ec5fa0ea28..3557f3338377d 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> @@ -323,6 +323,7 @@ wkup_gpio0: gpio@42110000 {
>   		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
>   		clocks = <&k3_clks 115 0>;
>   		clock-names = "gpio";
> +		status = "disabled";
>   	};
>   
>   	wkup_gpio1: gpio@42100000 {
> @@ -339,6 +340,7 @@ wkup_gpio1: gpio@42100000 {
>   		power-domains = <&k3_pds 116 TI_SCI_PD_EXCLUSIVE>;
>   		clocks = <&k3_clks 116 0>;
>   		clock-names = "gpio";
> +		status = "disabled";
>   	};
>   
>   	wkup_i2c0: i2c@42120000 {
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index ffca12df0a6da..4c855dffb4cd2 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -297,31 +297,17 @@  J721S2_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (K26) WKUP_GPIO0_49 */
 };
 
 &main_gpio0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&rpi_header_gpio0_pins_default>;
 };
 
-&main_gpio2 {
-	status = "disabled";
-};
-
-&main_gpio4 {
-	status = "disabled";
-};
-
-&main_gpio6 {
-	status = "disabled";
-};
-
 &wkup_gpio0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_rpi_header_gpio0_pins0_default>, <&mcu_rpi_header_gpio0_pins1_default>;
 };
 
-&wkup_gpio1 {
-	status = "disabled";
-};
-
 &wkup_uart0 {
 	status = "reserved";
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index 3a8e6eb402448..6f248d27a30a4 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -266,20 +266,14 @@  J721S2_WKUP_IOPAD(0x044, PIN_INPUT, 0) /* (B20) MCU_OSPI1_LBCLKO */
 	};
 };
 
-&main_gpio2 {
-	status = "disabled";
-};
-
-&main_gpio4 {
-	status = "disabled";
-};
-
-&main_gpio6 {
-	status = "disabled";
+&main_gpio0 {
+	status = "okay";
+	/* default pins */
 };
 
-&wkup_gpio1 {
-	status = "disabled";
+&wkup_gpio0 {
+	status = "okay";
+	/* default pins */
 };
 
 &wkup_uart0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index c46079fe4ed6e..0cc8057fce13c 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -507,6 +507,7 @@  main_gpio0: gpio@600000 {
 		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 111 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	main_gpio2: gpio@610000 {
@@ -523,6 +524,7 @@  main_gpio2: gpio@610000 {
 		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 112 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	main_gpio4: gpio@620000 {
@@ -539,6 +541,7 @@  main_gpio4: gpio@620000 {
 		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 113 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	main_gpio6: gpio@630000 {
@@ -555,6 +558,7 @@  main_gpio6: gpio@630000 {
 		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 114 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	main_i2c0: i2c@2000000 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 736ec5fa0ea28..3557f3338377d 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -323,6 +323,7 @@  wkup_gpio0: gpio@42110000 {
 		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 115 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	wkup_gpio1: gpio@42100000 {
@@ -339,6 +340,7 @@  wkup_gpio1: gpio@42100000 {
 		power-domains = <&k3_pds 116 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 116 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	wkup_i2c0: i2c@42120000 {