[v2,2/4] arm64: dts: ti: k3-j784s4-mcu-wakeup: Add bootph-pre-ram property for SPL nodes

Commit Message

Apurva Nandan Aug. 7, 2023, 6:56 p.m. UTC

Add bootph-pre-ram property for all the nodes used in SPL stage,
for syncing it later to u-boot j784s4 dts.

Signed-off-by: Apurva Nandan <[e-mail]>
---
 arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
index 657fb1d72512..521d3cfd10c4 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -6,7 +6,9 @@ 
  */
 
 &cbass_mcu_wakeup {
+	bootph-pre-ram;
 	sms: system-controller@44083000 {
+		bootph-pre-ram;
 		compatible = "ti,k2g-sci";
 		ti,host-id = <12>;
 
@@ -19,22 +21,26 @@  sms: system-controller@44083000 {
 		reg = <0x00 0x44083000 0x00 0x1000>;
 
 		k3_pds: power-controller {
+			bootph-pre-ram;
 			compatible = "ti,sci-pm-domain";
 			#power-domain-cells = <2>;
 		};
 
 		k3_clks: clock-controller {
+			bootph-pre-ram;
 			compatible = "ti,k2g-sci-clk";
 			#clock-cells = <2>;
 		};
 
 		k3_reset: reset-controller {
+			bootph-pre-ram;
 			compatible = "ti,sci-reset";
 			#reset-cells = <2>;
 		};
 	};
 
 	chipid@43000014 {
+		bootph-pre-ram;
 		compatible = "ti,am654-chipid";
 		reg = <0x00 0x43000014 0x00 0x4>;
 	};
@@ -161,6 +167,7 @@  mcu_timer0: timer@40400000 {
 	};
 
 	mcu_timer1: timer@40410000 {
+		bootph-pre-ram;
 		compatible = "ti,am654-timer";
 		reg = <0x00 0x40410000 0x00 0x400>;
 		interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>;
@@ -442,6 +449,7 @@  mcu_spi2: spi@40320000 {
 	};
 
 	mcu_navss: bus@28380000{
+		bootph-pre-ram;
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -451,6 +459,7 @@  mcu_navss: bus@28380000{
 		dma-ranges;
 
 		mcu_ringacc: ringacc@2b800000 {
+			bootph-pre-ram;
 			compatible = "ti,am654-navss-ringacc";
 			reg = <0x00 0x2b800000 0x00 0x400000>,
 			      <0x00 0x2b000000 0x00 0x400000>,
@@ -465,6 +474,7 @@  mcu_ringacc: ringacc@2b800000 {
 		};
 
 		mcu_udmap: dma-controller@285c0000 {
+			bootph-pre-ram;
 			compatible = "ti,j721e-navss-mcu-udmap";
 			reg = <0x00 0x285c0000 0x00 0x100>,
 			      <0x00 0x2a800000 0x00 0x40000>,