| Message ID | 20230808082738.122804-10-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | clk: samsung: remove number of clocks from bindings | expand |
On Tue, 8 Aug 2023 at 11:15, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > Number of clocks supported by Linux drivers might vary - sometimes we > add new clocks, not exposed previously. Therefore this number of clocks > should not be in the bindings, because otherwise we should not change > it. > > Define number of clocks per each clock controller inside the driver > directly. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> > drivers/clk/samsung/clk-exynos850.c | 35 ++++++++++++++++++++--------- > 1 file changed, 24 insertions(+), 11 deletions(-) > > diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c > index c32b2e6451a0..bdc1eef7d6e5 100644 > --- a/drivers/clk/samsung/clk-exynos850.c > +++ b/drivers/clk/samsung/clk-exynos850.c > @@ -16,6 +16,19 @@ > #include "clk.h" > #include "clk-exynos-arm64.h" > > +/* NOTE: Must be equal to the last clock ID increased by one */ > +#define CLKS_NR_TOP (CLK_DOUT_G3D_SWITCH + 1) > +#define CLKS_NR_APM (CLK_GOUT_SYSREG_APM_PCLK + 1) > +#define CLKS_NR_AUD (CLK_GOUT_AUD_CMU_AUD_PCLK + 1) > +#define CLKS_NR_CMGP (CLK_GOUT_SYSREG_CMGP_PCLK + 1) > +#define CLKS_NR_G3D (CLK_GOUT_G3D_SYSREG_PCLK + 1) > +#define CLKS_NR_HSI (CLK_GOUT_HSI_CMU_HSI_PCLK + 1) > +#define CLKS_NR_IS (CLK_GOUT_IS_SYSREG_PCLK + 1) > +#define CLKS_NR_MFCMSCL (CLK_GOUT_MFCMSCL_SYSREG_PCLK + 1) > +#define CLKS_NR_PERI (CLK_GOUT_WDT1_PCLK + 1) > +#define CLKS_NR_CORE (CLK_GOUT_SYSREG_CORE_PCLK + 1) > +#define CLKS_NR_DPU (CLK_GOUT_DPU_SYSREG_PCLK + 1) > + > /* ---- CMU_TOP ------------------------------------------------------------- */ > > /* Register Offset definitions for CMU_TOP (0x120e0000) */ > @@ -485,7 +498,7 @@ static const struct samsung_cmu_info top_cmu_info __initconst = { > .nr_div_clks = ARRAY_SIZE(top_div_clks), > .gate_clks = top_gate_clks, > .nr_gate_clks = ARRAY_SIZE(top_gate_clks), > - .nr_clk_ids = TOP_NR_CLK, > + .nr_clk_ids = CLKS_NR_TOP, > .clk_regs = top_clk_regs, > .nr_clk_regs = ARRAY_SIZE(top_clk_regs), > }; > @@ -625,7 +638,7 @@ static const struct samsung_cmu_info apm_cmu_info __initconst = { > .nr_gate_clks = ARRAY_SIZE(apm_gate_clks), > .fixed_clks = apm_fixed_clks, > .nr_fixed_clks = ARRAY_SIZE(apm_fixed_clks), > - .nr_clk_ids = APM_NR_CLK, > + .nr_clk_ids = CLKS_NR_APM, > .clk_regs = apm_clk_regs, > .nr_clk_regs = ARRAY_SIZE(apm_clk_regs), > .clk_name = "dout_clkcmu_apm_bus", > @@ -908,7 +921,7 @@ static const struct samsung_cmu_info aud_cmu_info __initconst = { > .nr_gate_clks = ARRAY_SIZE(aud_gate_clks), > .fixed_clks = aud_fixed_clks, > .nr_fixed_clks = ARRAY_SIZE(aud_fixed_clks), > - .nr_clk_ids = AUD_NR_CLK, > + .nr_clk_ids = CLKS_NR_AUD, > .clk_regs = aud_clk_regs, > .nr_clk_regs = ARRAY_SIZE(aud_clk_regs), > .clk_name = "dout_aud", > @@ -1011,7 +1024,7 @@ static const struct samsung_cmu_info cmgp_cmu_info __initconst = { > .nr_gate_clks = ARRAY_SIZE(cmgp_gate_clks), > .fixed_clks = cmgp_fixed_clks, > .nr_fixed_clks = ARRAY_SIZE(cmgp_fixed_clks), > - .nr_clk_ids = CMGP_NR_CLK, > + .nr_clk_ids = CLKS_NR_CMGP, > .clk_regs = cmgp_clk_regs, > .nr_clk_regs = ARRAY_SIZE(cmgp_clk_regs), > .clk_name = "gout_clkcmu_cmgp_bus", > @@ -1107,7 +1120,7 @@ static const struct samsung_cmu_info g3d_cmu_info __initconst = { > .nr_div_clks = ARRAY_SIZE(g3d_div_clks), > .gate_clks = g3d_gate_clks, > .nr_gate_clks = ARRAY_SIZE(g3d_gate_clks), > - .nr_clk_ids = G3D_NR_CLK, > + .nr_clk_ids = CLKS_NR_G3D, > .clk_regs = g3d_clk_regs, > .nr_clk_regs = ARRAY_SIZE(g3d_clk_regs), > .clk_name = "dout_g3d_switch", > @@ -1209,7 +1222,7 @@ static const struct samsung_cmu_info hsi_cmu_info __initconst = { > .nr_mux_clks = ARRAY_SIZE(hsi_mux_clks), > .gate_clks = hsi_gate_clks, > .nr_gate_clks = ARRAY_SIZE(hsi_gate_clks), > - .nr_clk_ids = HSI_NR_CLK, > + .nr_clk_ids = CLKS_NR_HSI, > .clk_regs = hsi_clk_regs, > .nr_clk_regs = ARRAY_SIZE(hsi_clk_regs), > .clk_name = "dout_hsi_bus", > @@ -1341,7 +1354,7 @@ static const struct samsung_cmu_info is_cmu_info __initconst = { > .nr_div_clks = ARRAY_SIZE(is_div_clks), > .gate_clks = is_gate_clks, > .nr_gate_clks = ARRAY_SIZE(is_gate_clks), > - .nr_clk_ids = IS_NR_CLK, > + .nr_clk_ids = CLKS_NR_IS, > .clk_regs = is_clk_regs, > .nr_clk_regs = ARRAY_SIZE(is_clk_regs), > .clk_name = "dout_is_bus", > @@ -1450,7 +1463,7 @@ static const struct samsung_cmu_info mfcmscl_cmu_info __initconst = { > .nr_div_clks = ARRAY_SIZE(mfcmscl_div_clks), > .gate_clks = mfcmscl_gate_clks, > .nr_gate_clks = ARRAY_SIZE(mfcmscl_gate_clks), > - .nr_clk_ids = MFCMSCL_NR_CLK, > + .nr_clk_ids = CLKS_NR_MFCMSCL, > .clk_regs = mfcmscl_clk_regs, > .nr_clk_regs = ARRAY_SIZE(mfcmscl_clk_regs), > .clk_name = "dout_mfcmscl_mfc", > @@ -1625,7 +1638,7 @@ static const struct samsung_cmu_info peri_cmu_info __initconst = { > .nr_div_clks = ARRAY_SIZE(peri_div_clks), > .gate_clks = peri_gate_clks, > .nr_gate_clks = ARRAY_SIZE(peri_gate_clks), > - .nr_clk_ids = PERI_NR_CLK, > + .nr_clk_ids = CLKS_NR_PERI, > .clk_regs = peri_clk_regs, > .nr_clk_regs = ARRAY_SIZE(peri_clk_regs), > .clk_name = "dout_peri_bus", > @@ -1732,7 +1745,7 @@ static const struct samsung_cmu_info core_cmu_info __initconst = { > .nr_div_clks = ARRAY_SIZE(core_div_clks), > .gate_clks = core_gate_clks, > .nr_gate_clks = ARRAY_SIZE(core_gate_clks), > - .nr_clk_ids = CORE_NR_CLK, > + .nr_clk_ids = CLKS_NR_CORE, > .clk_regs = core_clk_regs, > .nr_clk_regs = ARRAY_SIZE(core_clk_regs), > .clk_name = "dout_core_bus", > @@ -1806,7 +1819,7 @@ static const struct samsung_cmu_info dpu_cmu_info __initconst = { > .nr_div_clks = ARRAY_SIZE(dpu_div_clks), > .gate_clks = dpu_gate_clks, > .nr_gate_clks = ARRAY_SIZE(dpu_gate_clks), > - .nr_clk_ids = DPU_NR_CLK, > + .nr_clk_ids = CLKS_NR_DPU, > .clk_regs = dpu_clk_regs, > .nr_clk_regs = ARRAY_SIZE(dpu_clk_regs), > .clk_name = "dout_dpu", > -- > 2.34.1 >
> -----Original Message----- > From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Sent: Tuesday, August 8, 2023 1:58 PM > To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>; Sylwester > Nawrocki <s.nawrocki@samsung.com>; Tomasz Figa > <tomasz.figa@gmail.com>; Chanwoo Choi <cw00.choi@samsung.com>; Alim > Akhtar <alim.akhtar@samsung.com>; Michael Turquette > <mturquette@baylibre.com>; Stephen Boyd <sboyd@kernel.org>; Rob > Herring <robh+dt@kernel.org>; Conor Dooley <conor+dt@kernel.org>; > linux-samsung-soc@vger.kernel.org; linux-clk@vger.kernel.org; linux-arm- > kernel@lists.infradead.org; linux-kernel@vger.kernel.org; > devicetree@vger.kernel.org > Subject: [PATCH 09/11] clk: samsung: exynos850: do not define number of > clocks in bindings > > Number of clocks supported by Linux drivers might vary - sometimes we add > new clocks, not exposed previously. Therefore this number of clocks should > not be in the bindings, because otherwise we should not change it. > > Define number of clocks per each clock controller inside the driver directly. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> > drivers/clk/samsung/clk-exynos850.c | 35 ++++++++++++++++++++--------- > 1 file changed, 24 insertions(+), 11 deletions(-) > > diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk- > exynos850.c > index c32b2e6451a0..bdc1eef7d6e5 100644 > --- a/drivers/clk/samsung/clk-exynos850.c > +++ b/drivers/clk/samsung/clk-exynos850.c > @@ -16,6 +16,19 @@ > #include "clk.h" > #include "clk-exynos-arm64.h" > > +/* NOTE: Must be equal to the last clock ID increased by one */ > +#define CLKS_NR_TOP (CLK_DOUT_G3D_SWITCH + > 1) > +#define CLKS_NR_APM > (CLK_GOUT_SYSREG_APM_PCLK + 1) > +#define CLKS_NR_AUD > (CLK_GOUT_AUD_CMU_AUD_PCLK + 1) > +#define CLKS_NR_CMGP > (CLK_GOUT_SYSREG_CMGP_PCLK + 1) > +#define CLKS_NR_G3D > (CLK_GOUT_G3D_SYSREG_PCLK + 1) > +#define CLKS_NR_HSI (CLK_GOUT_HSI_CMU_HSI_PCLK + > 1) > +#define CLKS_NR_IS (CLK_GOUT_IS_SYSREG_PCLK + 1) > +#define CLKS_NR_MFCMSCL > (CLK_GOUT_MFCMSCL_SYSREG_PCLK + 1) > +#define CLKS_NR_PERI (CLK_GOUT_WDT1_PCLK + 1) > +#define CLKS_NR_CORE > (CLK_GOUT_SYSREG_CORE_PCLK + 1) > +#define CLKS_NR_DPU > (CLK_GOUT_DPU_SYSREG_PCLK + 1) > + > /* ---- CMU_TOP ------------------------------------------------------------- */ > > /* Register Offset definitions for CMU_TOP (0x120e0000) */ @@ -485,7 > +498,7 @@ static const struct samsung_cmu_info top_cmu_info __initconst > = { > .nr_div_clks = ARRAY_SIZE(top_div_clks), > .gate_clks = top_gate_clks, > .nr_gate_clks = ARRAY_SIZE(top_gate_clks), > - .nr_clk_ids = TOP_NR_CLK, > + .nr_clk_ids = CLKS_NR_TOP, > .clk_regs = top_clk_regs, > .nr_clk_regs = ARRAY_SIZE(top_clk_regs), > }; > @@ -625,7 +638,7 @@ static const struct samsung_cmu_info apm_cmu_info > __initconst = { > .nr_gate_clks = ARRAY_SIZE(apm_gate_clks), > .fixed_clks = apm_fixed_clks, > .nr_fixed_clks = ARRAY_SIZE(apm_fixed_clks), > - .nr_clk_ids = APM_NR_CLK, > + .nr_clk_ids = CLKS_NR_APM, > .clk_regs = apm_clk_regs, > .nr_clk_regs = ARRAY_SIZE(apm_clk_regs), > .clk_name = "dout_clkcmu_apm_bus", > @@ -908,7 +921,7 @@ static const struct samsung_cmu_info aud_cmu_info > __initconst = { > .nr_gate_clks = ARRAY_SIZE(aud_gate_clks), > .fixed_clks = aud_fixed_clks, > .nr_fixed_clks = ARRAY_SIZE(aud_fixed_clks), > - .nr_clk_ids = AUD_NR_CLK, > + .nr_clk_ids = CLKS_NR_AUD, > .clk_regs = aud_clk_regs, > .nr_clk_regs = ARRAY_SIZE(aud_clk_regs), > .clk_name = "dout_aud", > @@ -1011,7 +1024,7 @@ static const struct samsung_cmu_info > cmgp_cmu_info __initconst = { > .nr_gate_clks = ARRAY_SIZE(cmgp_gate_clks), > .fixed_clks = cmgp_fixed_clks, > .nr_fixed_clks = ARRAY_SIZE(cmgp_fixed_clks), > - .nr_clk_ids = CMGP_NR_CLK, > + .nr_clk_ids = CLKS_NR_CMGP, > .clk_regs = cmgp_clk_regs, > .nr_clk_regs = ARRAY_SIZE(cmgp_clk_regs), > .clk_name = "gout_clkcmu_cmgp_bus", > @@ -1107,7 +1120,7 @@ static const struct samsung_cmu_info > g3d_cmu_info __initconst = { > .nr_div_clks = ARRAY_SIZE(g3d_div_clks), > .gate_clks = g3d_gate_clks, > .nr_gate_clks = ARRAY_SIZE(g3d_gate_clks), > - .nr_clk_ids = G3D_NR_CLK, > + .nr_clk_ids = CLKS_NR_G3D, > .clk_regs = g3d_clk_regs, > .nr_clk_regs = ARRAY_SIZE(g3d_clk_regs), > .clk_name = "dout_g3d_switch", > @@ -1209,7 +1222,7 @@ static const struct samsung_cmu_info hsi_cmu_info > __initconst = { > .nr_mux_clks = ARRAY_SIZE(hsi_mux_clks), > .gate_clks = hsi_gate_clks, > .nr_gate_clks = ARRAY_SIZE(hsi_gate_clks), > - .nr_clk_ids = HSI_NR_CLK, > + .nr_clk_ids = CLKS_NR_HSI, > .clk_regs = hsi_clk_regs, > .nr_clk_regs = ARRAY_SIZE(hsi_clk_regs), > .clk_name = "dout_hsi_bus", > @@ -1341,7 +1354,7 @@ static const struct samsung_cmu_info is_cmu_info > __initconst = { > .nr_div_clks = ARRAY_SIZE(is_div_clks), > .gate_clks = is_gate_clks, > .nr_gate_clks = ARRAY_SIZE(is_gate_clks), > - .nr_clk_ids = IS_NR_CLK, > + .nr_clk_ids = CLKS_NR_IS, > .clk_regs = is_clk_regs, > .nr_clk_regs = ARRAY_SIZE(is_clk_regs), > .clk_name = "dout_is_bus", > @@ -1450,7 +1463,7 @@ static const struct samsung_cmu_info > mfcmscl_cmu_info __initconst = { > .nr_div_clks = ARRAY_SIZE(mfcmscl_div_clks), > .gate_clks = mfcmscl_gate_clks, > .nr_gate_clks = ARRAY_SIZE(mfcmscl_gate_clks), > - .nr_clk_ids = MFCMSCL_NR_CLK, > + .nr_clk_ids = CLKS_NR_MFCMSCL, > .clk_regs = mfcmscl_clk_regs, > .nr_clk_regs = ARRAY_SIZE(mfcmscl_clk_regs), > .clk_name = "dout_mfcmscl_mfc", > @@ -1625,7 +1638,7 @@ static const struct samsung_cmu_info > peri_cmu_info __initconst = { > .nr_div_clks = ARRAY_SIZE(peri_div_clks), > .gate_clks = peri_gate_clks, > .nr_gate_clks = ARRAY_SIZE(peri_gate_clks), > - .nr_clk_ids = PERI_NR_CLK, > + .nr_clk_ids = CLKS_NR_PERI, > .clk_regs = peri_clk_regs, > .nr_clk_regs = ARRAY_SIZE(peri_clk_regs), > .clk_name = "dout_peri_bus", > @@ -1732,7 +1745,7 @@ static const struct samsung_cmu_info > core_cmu_info __initconst = { > .nr_div_clks = ARRAY_SIZE(core_div_clks), > .gate_clks = core_gate_clks, > .nr_gate_clks = ARRAY_SIZE(core_gate_clks), > - .nr_clk_ids = CORE_NR_CLK, > + .nr_clk_ids = CLKS_NR_CORE, > .clk_regs = core_clk_regs, > .nr_clk_regs = ARRAY_SIZE(core_clk_regs), > .clk_name = "dout_core_bus", > @@ -1806,7 +1819,7 @@ static const struct samsung_cmu_info > dpu_cmu_info __initconst = { > .nr_div_clks = ARRAY_SIZE(dpu_div_clks), > .gate_clks = dpu_gate_clks, > .nr_gate_clks = ARRAY_SIZE(dpu_gate_clks), > - .nr_clk_ids = DPU_NR_CLK, > + .nr_clk_ids = CLKS_NR_DPU, > .clk_regs = dpu_clk_regs, > .nr_clk_regs = ARRAY_SIZE(dpu_clk_regs), > .clk_name = "dout_dpu", > -- > 2.34.1
diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c index c32b2e6451a0..bdc1eef7d6e5 100644 --- a/drivers/clk/samsung/clk-exynos850.c +++ b/drivers/clk/samsung/clk-exynos850.c @@ -16,6 +16,19 @@ #include "clk.h" #include "clk-exynos-arm64.h" +/* NOTE: Must be equal to the last clock ID increased by one */ +#define CLKS_NR_TOP (CLK_DOUT_G3D_SWITCH + 1) +#define CLKS_NR_APM (CLK_GOUT_SYSREG_APM_PCLK + 1) +#define CLKS_NR_AUD (CLK_GOUT_AUD_CMU_AUD_PCLK + 1) +#define CLKS_NR_CMGP (CLK_GOUT_SYSREG_CMGP_PCLK + 1) +#define CLKS_NR_G3D (CLK_GOUT_G3D_SYSREG_PCLK + 1) +#define CLKS_NR_HSI (CLK_GOUT_HSI_CMU_HSI_PCLK + 1) +#define CLKS_NR_IS (CLK_GOUT_IS_SYSREG_PCLK + 1) +#define CLKS_NR_MFCMSCL (CLK_GOUT_MFCMSCL_SYSREG_PCLK + 1) +#define CLKS_NR_PERI (CLK_GOUT_WDT1_PCLK + 1) +#define CLKS_NR_CORE (CLK_GOUT_SYSREG_CORE_PCLK + 1) +#define CLKS_NR_DPU (CLK_GOUT_DPU_SYSREG_PCLK + 1) + /* ---- CMU_TOP ------------------------------------------------------------- */ /* Register Offset definitions for CMU_TOP (0x120e0000) */ @@ -485,7 +498,7 @@ static const struct samsung_cmu_info top_cmu_info __initconst = { .nr_div_clks = ARRAY_SIZE(top_div_clks), .gate_clks = top_gate_clks, .nr_gate_clks = ARRAY_SIZE(top_gate_clks), - .nr_clk_ids = TOP_NR_CLK, + .nr_clk_ids = CLKS_NR_TOP, .clk_regs = top_clk_regs, .nr_clk_regs = ARRAY_SIZE(top_clk_regs), }; @@ -625,7 +638,7 @@ static const struct samsung_cmu_info apm_cmu_info __initconst = { .nr_gate_clks = ARRAY_SIZE(apm_gate_clks), .fixed_clks = apm_fixed_clks, .nr_fixed_clks = ARRAY_SIZE(apm_fixed_clks), - .nr_clk_ids = APM_NR_CLK, + .nr_clk_ids = CLKS_NR_APM, .clk_regs = apm_clk_regs, .nr_clk_regs = ARRAY_SIZE(apm_clk_regs), .clk_name = "dout_clkcmu_apm_bus", @@ -908,7 +921,7 @@ static const struct samsung_cmu_info aud_cmu_info __initconst = { .nr_gate_clks = ARRAY_SIZE(aud_gate_clks), .fixed_clks = aud_fixed_clks, .nr_fixed_clks = ARRAY_SIZE(aud_fixed_clks), - .nr_clk_ids = AUD_NR_CLK, + .nr_clk_ids = CLKS_NR_AUD, .clk_regs = aud_clk_regs, .nr_clk_regs = ARRAY_SIZE(aud_clk_regs), .clk_name = "dout_aud", @@ -1011,7 +1024,7 @@ static const struct samsung_cmu_info cmgp_cmu_info __initconst = { .nr_gate_clks = ARRAY_SIZE(cmgp_gate_clks), .fixed_clks = cmgp_fixed_clks, .nr_fixed_clks = ARRAY_SIZE(cmgp_fixed_clks), - .nr_clk_ids = CMGP_NR_CLK, + .nr_clk_ids = CLKS_NR_CMGP, .clk_regs = cmgp_clk_regs, .nr_clk_regs = ARRAY_SIZE(cmgp_clk_regs), .clk_name = "gout_clkcmu_cmgp_bus", @@ -1107,7 +1120,7 @@ static const struct samsung_cmu_info g3d_cmu_info __initconst = { .nr_div_clks = ARRAY_SIZE(g3d_div_clks), .gate_clks = g3d_gate_clks, .nr_gate_clks = ARRAY_SIZE(g3d_gate_clks), - .nr_clk_ids = G3D_NR_CLK, + .nr_clk_ids = CLKS_NR_G3D, .clk_regs = g3d_clk_regs, .nr_clk_regs = ARRAY_SIZE(g3d_clk_regs), .clk_name = "dout_g3d_switch", @@ -1209,7 +1222,7 @@ static const struct samsung_cmu_info hsi_cmu_info __initconst = { .nr_mux_clks = ARRAY_SIZE(hsi_mux_clks), .gate_clks = hsi_gate_clks, .nr_gate_clks = ARRAY_SIZE(hsi_gate_clks), - .nr_clk_ids = HSI_NR_CLK, + .nr_clk_ids = CLKS_NR_HSI, .clk_regs = hsi_clk_regs, .nr_clk_regs = ARRAY_SIZE(hsi_clk_regs), .clk_name = "dout_hsi_bus", @@ -1341,7 +1354,7 @@ static const struct samsung_cmu_info is_cmu_info __initconst = { .nr_div_clks = ARRAY_SIZE(is_div_clks), .gate_clks = is_gate_clks, .nr_gate_clks = ARRAY_SIZE(is_gate_clks), - .nr_clk_ids = IS_NR_CLK, + .nr_clk_ids = CLKS_NR_IS, .clk_regs = is_clk_regs, .nr_clk_regs = ARRAY_SIZE(is_clk_regs), .clk_name = "dout_is_bus", @@ -1450,7 +1463,7 @@ static const struct samsung_cmu_info mfcmscl_cmu_info __initconst = { .nr_div_clks = ARRAY_SIZE(mfcmscl_div_clks), .gate_clks = mfcmscl_gate_clks, .nr_gate_clks = ARRAY_SIZE(mfcmscl_gate_clks), - .nr_clk_ids = MFCMSCL_NR_CLK, + .nr_clk_ids = CLKS_NR_MFCMSCL, .clk_regs = mfcmscl_clk_regs, .nr_clk_regs = ARRAY_SIZE(mfcmscl_clk_regs), .clk_name = "dout_mfcmscl_mfc", @@ -1625,7 +1638,7 @@ static const struct samsung_cmu_info peri_cmu_info __initconst = { .nr_div_clks = ARRAY_SIZE(peri_div_clks), .gate_clks = peri_gate_clks, .nr_gate_clks = ARRAY_SIZE(peri_gate_clks), - .nr_clk_ids = PERI_NR_CLK, + .nr_clk_ids = CLKS_NR_PERI, .clk_regs = peri_clk_regs, .nr_clk_regs = ARRAY_SIZE(peri_clk_regs), .clk_name = "dout_peri_bus", @@ -1732,7 +1745,7 @@ static const struct samsung_cmu_info core_cmu_info __initconst = { .nr_div_clks = ARRAY_SIZE(core_div_clks), .gate_clks = core_gate_clks, .nr_gate_clks = ARRAY_SIZE(core_gate_clks), - .nr_clk_ids = CORE_NR_CLK, + .nr_clk_ids = CLKS_NR_CORE, .clk_regs = core_clk_regs, .nr_clk_regs = ARRAY_SIZE(core_clk_regs), .clk_name = "dout_core_bus", @@ -1806,7 +1819,7 @@ static const struct samsung_cmu_info dpu_cmu_info __initconst = { .nr_div_clks = ARRAY_SIZE(dpu_div_clks), .gate_clks = dpu_gate_clks, .nr_gate_clks = ARRAY_SIZE(dpu_gate_clks), - .nr_clk_ids = DPU_NR_CLK, + .nr_clk_ids = CLKS_NR_DPU, .clk_regs = dpu_clk_regs, .nr_clk_regs = ARRAY_SIZE(dpu_clk_regs), .clk_name = "dout_dpu",
Number of clocks supported by Linux drivers might vary - sometimes we add new clocks, not exposed previously. Therefore this number of clocks should not be in the bindings, because otherwise we should not change it. Define number of clocks per each clock controller inside the driver directly. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- drivers/clk/samsung/clk-exynos850.c | 35 ++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 11 deletions(-)