| Message ID | 20230808133457.25060-6-afd@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Another round of K3 DTSI disables | expand |
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts index 64eed76bbb7a3..0b89977351c98 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts @@ -580,16 +580,6 @@ &main_sdhci1 { disable-wp; }; -&ospi0 { - /* Unused */ - status = "disabled"; -}; - -&ospi1 { - /* Unused */ - status = "disabled"; -}; - &main_i2c0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index c1b6f8d7d1898..0c01bdd9656f1 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -378,6 +378,7 @@ ospi0: spi@47040000 { power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; ospi1: spi@47050000 { @@ -392,6 +393,7 @@ ospi1: spi@47050000 { power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index bd1bd1b746056..4cd5346f2dd59 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -594,6 +594,7 @@ &main_sdhci1 { }; &ospi0 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; @@ -657,11 +658,6 @@ partition@3fc0000 { }; }; -&ospi1 { - /* Unused */ - status = "disabled"; -}; - &main_i2c0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi index e90e43202546e..928d3a8ad2d09 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -202,6 +202,7 @@ eeprom@50 { }; &ospi0 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
OSPI nodes defined in the top-level J721e SoC dtsi files are incomplete and may not be functional unless they are extended with pinmux and device information. As the attached OSPI device is only known about at the board integration level, these nodes should only be enabled when provided with this information. Disable the OSPI nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by: Andrew Davis <afd@ti.com> --- arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts | 10 ---------- arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 2 ++ arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 6 +----- arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 1 + 4 files changed, 4 insertions(+), 15 deletions(-)