| Message ID | 20230810003814.85450-3-afd@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Another round of K3 DTSI disables | expand |
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index 92a5414911729..dee9056f56051 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -326,6 +326,7 @@ exp3: gpio@20 { &main_sdhci0 { /* eMMC */ + status = "okay"; non-removable; ti,driver-strength-ohm = <50>; disable-wp; @@ -333,6 +334,7 @@ &main_sdhci0 { &main_sdhci1 { /* SD card */ + status = "okay"; pinctrl-0 = <&main_mmc1_pins_default>; pinctrl-names = "default"; vmmc-supply = <&vdd_mmc1>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 6eaade5aeb423..5d7542ba41b93 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -654,6 +654,7 @@ main_sdhci0: mmc@4f80000 { mmc-hs200-1_8v; mmc-hs400-1_8v; dma-coherent; + status = "disabled"; }; main_sdhci1: mmc@4fb0000 { @@ -677,6 +678,7 @@ main_sdhci1: mmc@4fb0000 { ti,clkbuf-sel = <0x7>; ti,trm-icp = <0x8>; dma-coherent; + status = "disabled"; }; serdes_wiz0: wiz@5060000 {
SDHCI nodes defined in the top-level J7200 SoC dtsi files are incomplete and will not be functional unless they are extended. As the attached SD/eMMC is only known about at the board integration level, these nodes should only be enabled when provided with this information. Disable the SDHCI nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by: Andrew Davis <afd@ti.com> --- arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 2 ++ arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 ++ 2 files changed, 4 insertions(+)