diff mbox series

[2/6] dt-bindings: imx-thermal: Add #thermal-sensor-cells property

Message ID 20230810144451.1459985-3-alexander.stein@ew.tq-group.com (mailing list archive)
State New, archived
Headers show
Series imx6q related DT binding fixes | expand

Commit Message

Alexander Stein Aug. 10, 2023, 2:44 p.m. UTC
This property is defined in thermal-sensor.yaml. Reference this file and
constraint '#thermal-sensor-cells' to 0 for imx-thermal.
Fixes the warning:
arch/arm/boot/dts/nxp/imx/imx6q-mba6a.dtb: tempmon:
 '#thermal-sensor-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
 From schema: Documentation/devicetree/bindings/thermal/imx-thermal.yaml

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 Documentation/devicetree/bindings/thermal/imx-thermal.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Rob Herring (Arm) Aug. 11, 2023, 2 p.m. UTC | #1
On Thu, 10 Aug 2023 16:44:47 +0200, Alexander Stein wrote:
> This property is defined in thermal-sensor.yaml. Reference this file and
> constraint '#thermal-sensor-cells' to 0 for imx-thermal.
> Fixes the warning:
> arch/arm/boot/dts/nxp/imx/imx6q-mba6a.dtb: tempmon:
>  '#thermal-sensor-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
>  From schema: Documentation/devicetree/bindings/thermal/imx-thermal.yaml
> 
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
>  Documentation/devicetree/bindings/thermal/imx-thermal.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/thermal/imx-thermal.example.dtb: tempmon: '#thermal-sensor-cells' is a required property
	from schema $id: http://devicetree.org/schemas/thermal/imx-thermal.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230810144451.1459985-3-alexander.stein@ew.tq-group.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
index 3aecea77869f..a746f6a6395a 100644
--- a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
@@ -60,6 +60,9 @@  properties:
   clocks:
     maxItems: 1
 
+  "#thermal-sensor-cells":
+    const: 0
+
 required:
   - compatible
   - interrupts
@@ -67,6 +70,9 @@  required:
   - nvmem-cells
   - nvmem-cell-names
 
+allOf:
+  - $ref: thermal-sensor.yaml#
+
 additionalProperties: false
 
 examples: