diff mbox series

[RFC,7/7] dt-bindings: sound: sun4i-i2s: Add channel-slots property

Message ID 20230811201406.4096210-8-contact@jookia.org (mailing list archive)
State New, archived
Headers show
Series sun4i-i2s: Support channel remapping | expand

Commit Message

John Watts Aug. 11, 2023, 8:14 p.m. UTC
The sun4i I2S controller supports mapping arbitrary TDM slots to
each channel. Allow this to be expressed in the device tree.

This is currently only implemented in the R329 I2S variant.

Allow this to be configured using a new channel-dins property.

Signed-off-by: John Watts <contact@jookia.org>
---
 .../bindings/sound/allwinner,sun4i-a10-i2s.yaml           | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Rob Herring (Arm) Aug. 21, 2023, 5:35 p.m. UTC | #1
On Sat, Aug 12, 2023 at 06:14:06AM +1000, John Watts wrote:
> The sun4i I2S controller supports mapping arbitrary TDM slots to
> each channel. Allow this to be expressed in the device tree.
> 
> This is currently only implemented in the R329 I2S variant.
> 
> Allow this to be configured using a new channel-dins property.
> 
> Signed-off-by: John Watts <contact@jookia.org>
> ---
>  .../bindings/sound/allwinner,sun4i-a10-i2s.yaml           | 8 ++++++++
>  1 file changed, 8 insertions(+)

Same comments on this one.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
index 402549f9941c..a74b02387d8a 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
@@ -59,6 +59,13 @@  properties:
       channel. Pins are mapped to channels based on array index.
       Channel 0 is the first number, then channel 1, and so on.
 
+  channel-slots:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      This is a list of channel I2S TDM slot numbers. Slots are mapped
+      to channels based on array index.
+      Channel 0 is the first number, then channel 1, and so on.
+
   # Even though it only applies to subschemas under the conditionals,
   # not listing them here will trigger a warning because of the
   # additionalsProperties set to false.
@@ -164,6 +171,7 @@  examples:
             dmas = <&dma 3>, <&dma 3>;
             dma-names = "rx", "tx";
             channel-dins = /bits/ 8 <0 0 1 1 2 2>;
+            channel-slots = /bits/ 8 <0 1 0 1 0 1>;
     };
 
 ...