diff mbox series

[v4,2/3] PCI: xilinx-nwl: Rename ECAM size default macro.

Message ID 20230814171406.214932-4-thippeswamy.havalige@amd.com (mailing list archive)
State New, archived
Headers show
Series [v3] PCI: xilinx-nwl: Remove unnecessary code which updates primary, secondary and sub-ordinate bus numbers | expand

Commit Message

Havalige, Thippeswamy Aug. 14, 2023, 5:14 p.m. UTC
Rename "NWL_ECAM_VALUE_DEFAULT" to a suitable macro name and remove
redundant code.

Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@amd.com>
---
changes in v4:
- Rename macro
changes in v3:
- Remove periods at end of subject line
- Update commit logs
changes in v2:
- Update this changes in a seperate patch.
---
 drivers/pci/controller/pcie-xilinx-nwl.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
index d8a3a08be1d5..8fe0e8a325b0 100644
--- a/drivers/pci/controller/pcie-xilinx-nwl.c
+++ b/drivers/pci/controller/pcie-xilinx-nwl.c
@@ -126,7 +126,7 @@ 
 #define E_ECAM_CR_ENABLE		BIT(0)
 #define E_ECAM_SIZE_LOC			GENMASK(20, 16)
 #define E_ECAM_SIZE_SHIFT		16
-#define NWL_ECAM_VALUE_DEFAULT		12
+#define NWL_ECAM_MAX_SIZE		12
 
 #define CFG_DMA_REG_BAR			GENMASK(2, 0)
 #define CFG_PCIE_CACHE			GENMASK(7, 0)
@@ -165,7 +165,6 @@  struct nwl_pcie {
 	u32 ecam_size;
 	int irq_intx;
 	int irq_misc;
-	u32 ecam_value;
 	struct nwl_msi msi;
 	struct irq_domain *legacy_irq_domain;
 	struct clk *clk;
@@ -674,7 +673,7 @@  static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
 			  E_ECAM_CR_ENABLE, E_ECAM_CONTROL);
 
 	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, E_ECAM_CONTROL) |
-			  (pcie->ecam_value << E_ECAM_SIZE_SHIFT),
+			  (NWL_ECAM_MAX_SIZE << E_ECAM_SIZE_SHIFT),
 			  E_ECAM_CONTROL);
 
 	nwl_bridge_writel(pcie, lower_32_bits(pcie->phys_ecam_base),
@@ -782,7 +781,6 @@  static int nwl_pcie_probe(struct platform_device *pdev)
 	pcie = pci_host_bridge_priv(bridge);
 
 	pcie->dev = dev;
-	pcie->ecam_value = NWL_ECAM_VALUE_DEFAULT;
 
 	err = nwl_pcie_parse_dt(pcie, pdev);
 	if (err) {