[-next,10/11] mtd: rawnand: vf610_nfc: Use helper function devm_clk_get_enabled()

Commit Message

Li Zetao Aug. 17, 2023, 2:45 a.m. UTC

After the commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for
prepared and enabled clocks"), it can replace the pair of functions,
devm_clk_get() and clk_prepare_enable() with a single helper function
devm_clk_get_enabled(). Moreover, the driver will keeps a clock prepared
(or enabled) during the whole lifetime of the driver, it is unnecessary to
unprepare and disable clock explicitly when remove driver or in the error
handling path.

Signed-off-by: Li Zetao <[e-mail]>
---
 drivers/mtd/nand/raw/vf610_nfc.c | 29 +++++++++--------------------
 1 file changed, 9 insertions(+), 20 deletions(-)

Patch

diff --git a/drivers/mtd/nand/raw/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c
index dcdf33dbaef2..1ce9d5c2b1f7 100644
--- a/drivers/mtd/nand/raw/vf610_nfc.c
+++ b/drivers/mtd/nand/raw/vf610_nfc.c
@@ -834,21 +834,15 @@  static int vf610_nfc_probe(struct platform_device *pdev)
 	if (IS_ERR(nfc->regs))
 		return PTR_ERR(nfc->regs);
 
-	nfc->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(nfc->clk))
+	nfc->clk = devm_clk_get_enabled(&pdev->dev, NULL);
+	if (IS_ERR(nfc->clk)) {
+		dev_err(nfc->dev, "Unable to get and enable clock!\n");
 		return PTR_ERR(nfc->clk);
-
-	err = clk_prepare_enable(nfc->clk);
-	if (err) {
-		dev_err(nfc->dev, "Unable to enable clock!\n");
-		return err;
 	}
 
 	of_id = of_match_device(vf610_nfc_dt_ids, &pdev->dev);
-	if (!of_id) {
-		err = -ENODEV;
-		goto err_disable_clk;
-	}
+	if (!of_id)
+		return -ENODEV;
 
 	nfc->variant = (enum vf610_nfc_variant)of_id->data;
 
@@ -858,9 +852,8 @@  static int vf610_nfc_probe(struct platform_device *pdev)
 			if (nand_get_flash_node(chip)) {
 				dev_err(nfc->dev,
 					"Only one NAND chip supported!\n");
-				err = -EINVAL;
 				of_node_put(child);
-				goto err_disable_clk;
+				return -EINVAL;
 			}
 
 			nand_set_flash_node(chip, child);
@@ -869,8 +862,7 @@  static int vf610_nfc_probe(struct platform_device *pdev)
 
 	if (!nand_get_flash_node(chip)) {
 		dev_err(nfc->dev, "NAND chip sub-node missing!\n");
-		err = -ENODEV;
-		goto err_disable_clk;
+		return -ENODEV;
 	}
 
 	chip->options |= NAND_NO_SUBPAGE_WRITE;
@@ -880,7 +872,7 @@  static int vf610_nfc_probe(struct platform_device *pdev)
 	err = devm_request_irq(nfc->dev, irq, vf610_nfc_irq, 0, DRV_NAME, nfc);
 	if (err) {
 		dev_err(nfc->dev, "Error requesting IRQ!\n");
-		goto err_disable_clk;
+		return err;
 	}
 
 	vf610_nfc_preinit_controller(nfc);
@@ -892,7 +884,7 @@  static int vf610_nfc_probe(struct platform_device *pdev)
 	/* Scan the NAND chip */
 	err = nand_scan(chip, 1);
 	if (err)
-		goto err_disable_clk;
+		return err;
 
 	platform_set_drvdata(pdev, nfc);
 
@@ -904,8 +896,6 @@  static int vf610_nfc_probe(struct platform_device *pdev)
 
 err_cleanup_nand:
 	nand_cleanup(chip);
-err_disable_clk:
-	clk_disable_unprepare(nfc->clk);
 	return err;
 }
 
@@ -918,7 +908,6 @@  static void vf610_nfc_remove(struct platform_device *pdev)
 	ret = mtd_device_unregister(nand_to_mtd(chip));
 	WARN_ON(ret);
 	nand_cleanup(chip);
-	clk_disable_unprepare(nfc->clk);
 }
 
 #ifdef CONFIG_PM_SLEEP