@@ -871,15 +871,12 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
mtd->dev.parent = &pdev->dev;
/* Get NAND clock */
- host->clk = devm_clk_get(&pdev->dev, NULL);
+ host->clk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(host->clk)) {
dev_err(&pdev->dev, "Clock failure\n");
res = -ENOENT;
goto enable_wp;
}
- res = clk_prepare_enable(host->clk);
- if (res)
- goto enable_wp;
/* Set NAND IO addresses and command/ready functions */
chip->legacy.IO_ADDR_R = SLC_DATA(host->io_base);
@@ -907,13 +904,13 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
GFP_KERNEL);
if (host->data_buf == NULL) {
res = -ENOMEM;
- goto unprepare_clk;
+ goto enable_wp;
}
res = lpc32xx_nand_dma_setup(host);
if (res) {
res = -EIO;
- goto unprepare_clk;
+ goto enable_wp;
}
/* Find NAND device */
@@ -934,8 +931,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
nand_cleanup(chip);
release_dma:
dma_release_channel(host->dma_chan);
-unprepare_clk:
- clk_disable_unprepare(host->clk);
enable_wp:
lpc32xx_wp_enable(host);
@@ -962,7 +957,6 @@ static void lpc32xx_nand_remove(struct platform_device *pdev)
tmp &= ~SLCCFG_CE_LOW;
writel(tmp, SLC_CTRL(host->io_base));
- clk_disable_unprepare(host->clk);
lpc32xx_wp_enable(host);
}
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be replaced by devm_clk_get_enabled() when driver enable (and possibly prepare) the clocks for the whole lifetime of the device. Moreover, it is no longer necessary to unprepare and disable the clock explicitly, so drop the label "unprepare_clk". Signed-off-by: Li Zetao <lizetao1@huawei.com> --- v1 -> v2: Modify commit message. v1: https://lore.kernel.org/all/20230817024509.3951629-6-lizetao1@huawei.com/ drivers/mtd/nand/raw/lpc32xx_slc.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-)