| Message ID | 20230818075106.2819520-2-o.rempel@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v1,1/2] dt-bindings: arm: Add compatible for SKOV i.MX8MP RevA board | expand |
On Fri, Aug 18, 2023 at 09:51:06AM +0200, Oleksij Rempel wrote: > Add Skov i.MX8MP based climate controller. > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> I have some updates for this patch. Will send new version later. > --- > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../boot/dts/freescale/imx8mp-skov-reva.dts | 711 ++++++++++++++++++ > 2 files changed, 712 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dts > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index c6872b7e9471d..3a20565112673 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb > +dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-reva.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dts > new file mode 100644 > index 0000000000000..a5b8731557ddb > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dts > @@ -0,0 +1,711 @@ > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > + > +/dts-v1/; > + > +#include "imx8mp.dtsi" > + > +#include <dt-bindings/leds/common.h> > + > +/ { > + model = "SKOV IMX8MP CPU revA - MI1010AIT-1CP1"; > + compatible = "skov,imx8mp-skov-reva-mi1010ait-1cp1", "fsl,imx8mp"; > + > + aliases { > + ethernet0 = &eqos; > + ethernet1 = &lan1; > + ethernet2 = &lan2; > + rtc0 = &i2c_rtc; > + rtc1 = &snvs_rtc; > + }; > + > + backlight: backlight { > + compatible = "pwm-backlight"; > + pinctrl-0 = <&pinctrl_backlight>; > + pwms = <&pwm1 0 20000 0>; > + power-supply = <®_24v0>; > + enable-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; > + brightness-levels = <0 255>; > + num-interpolated-steps = <17>; > + default-brightness-level = <8>; > + }; > + > + display { > + compatible = "multi-inno,mi1010ait-1cp"; > + backlight = <&backlight>; > + power-supply = <&buck4>; > + > + port { > + panel_in_lvds0: endpoint { > + remote-endpoint = <&ldb_lvds_ch0>; > + }; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_led>; > + > + led-0 { > + label = "D1"; > + color = <LED_COLOR_ID_GREEN>; > + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; > + function = LED_FUNCTION_STATUS; > + default-state = "on"; > + linux,default-trigger = "heartbeat"; > + }; > + > + led-1 { > + label = "D2"; > + color = <LED_COLOR_ID_GREEN>; > + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + led-2 { > + label = "D3"; > + color = <LED_COLOR_ID_GREEN>; > + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; > + default-state = "on"; > + }; > + }; > + > + reg_2v5: regulator-2v5 { > + compatible = "regulator-fixed"; > + vin-supply = <®_5v0>; > + regulator-name = "2v5"; > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + }; > + > + reg_5v0: regulator-5v0 { > + compatible = "regulator-fixed"; > + regulator-name = "5v0"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + reg_24v0: regulator-24v0 { > + compatible = "regulator-fixed"; > + regulator-name = "24v0"; > + regulator-min-microvolt = <24000000>; > + regulator-max-microvolt = <24000000>; > + }; > + > + reg_can1_stby: regulator-can1-stby { > + compatible = "regulator-fixed"; > + regulator-name = "can1-3v3"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan1_reg>; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; > + }; > + > + reg_can2_stby: regulator-can2-stby { > + compatible = "regulator-fixed"; > + regulator-name = "can2-3v3"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan2_reg>; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpio4 22 GPIO_ACTIVE_LOW>; > + }; > + > + reg_sd2_vsel: regulator-sd2-vsel { > + compatible = "regulator-gpio"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_reg_sd2_vsel>; > + regulator-name = "SD2_VSEL"; > + regulator-type = "voltage"; > + vin-supply = <&buck4>; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; > + states = <3300000 0x1 1800000 0x0>; > + }; > +}; > + > +&A53_0 { > + cpu-supply = <&buck2>; > +}; > + > +&A53_1 { > + cpu-supply = <&buck2>; > +}; > + > +&A53_2 { > + cpu-supply = <&buck2>; > +}; > + > +&A53_3 { > + cpu-supply = <&buck2>; > +}; > + > +&ecspi2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi2>; > + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; > + status = "okay"; > + > + adc: adc@0 { > + compatible = "microchip,mcp3002"; > + reg = <0>; > + vref-supply = <&buck4>; > + spi-max-frequency = <1000000>; > + #io-channel-cells = <1>; > + }; > +}; > + > +&eqos { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_eqos>; > + phy-mode = "rgmii"; > + status = "okay"; > + > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > +}; > + > +&flexcan1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan1>; > + xceiver-supply = <®_can1_stby>; > + status = "okay"; > +}; > + > +&flexcan2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan2>; > + xceiver-supply = <®_can2_stby>; > + status = "okay"; > +}; > + > +&i2c1 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + status = "okay"; > + > + pmic@25 { > + compatible = "nxp,pca9450c"; > + reg = <0x25>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pmic>; > + interrupts-extended = <&gpio1 3 IRQ_TYPE_EDGE_RISING>; > + > + regulators { > + buck1: BUCK1 { > + regulator-name = "BUCK1"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <2187500>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <3125>; > + }; > + > + buck2: BUCK2 { > + regulator-name = "BUCK2"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <2187500>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <3125>; > + nxp,dvs-run-voltage = <950000>; > + nxp,dvs-standby-voltage = <850000>; > + }; > + > + buck4: BUCK4 { /* VDD_3V3 */ > + regulator-name = "BUCK4"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <3400000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + buck5: BUCK5 { /* VDD_1V8 */ > + regulator-name = "BUCK5"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <3400000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + buck6: BUCK6 { /* NVCC_DRAM_1V1 */ > + regulator-name = "BUCK6"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <3400000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo1: LDO1 { /* NVCC_SNVS_1V8 */ > + regulator-name = "LDO1"; > + regulator-min-microvolt = <1600000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo3: LDO3 { /* VDDA_1V8 */ > + regulator-name = "LDO3"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo5: LDO5 { /* NVCC_SD2 */ > + regulator-name = "LDO5"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > + > + touchscreen@38 { > + compatible = "edt,edt-ft5406"; > + reg = <0x38>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_touchscreen>; > + interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>; > + reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>; > + touchscreen-size-x = <1280>; > + touchscreen-size-y = <800>; > + vcc-supply = <&buck4>; > + iovcc-supply = <&buck4>; > + wakeup-source; > + }; > +}; > + > +&i2c3 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3>; > + status = "okay"; > + > + i2c_rtc: rtc@51 { > + compatible = "nxp,pcf85063tp"; > + reg = <0x51>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rtc>; > + interrupts-extended = <&gpio4 31 IRQ_TYPE_EDGE_FALLING>; > + quartz-load-femtofarads = <12500>; > + > + clock { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + }; > + }; > +}; > + > +&i2c4 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c4>; > + status = "okay"; > + > + switch@5f { > + compatible = "microchip,ksz9893"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_switch>; > + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; > + reg = <0x5f>; > + > + ethernet-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + lan1: port@0 { > + reg = <0>; > + phy-mode = "internal"; > + label = "lan1"; > + }; > + > + lan2: port@1 { > + reg = <1>; > + phy-mode = "internal"; > + label = "lan2"; > + }; > + > + port@2 { > + reg = <2>; > + label = "cpu"; > + ethernet = <&eqos>; > + /* 2ns rgmii-rxid is implemented on PCB. > + * Switch should add only rgmii-txid. > + */ > + phy-mode = "rgmii-txid"; > + tx-internal-delay-ps = <2000>; > + rx-internal-delay-ps = <0>; > + > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > + }; > + }; > + }; > +}; > + > +&lcdif2 { > + status = "okay"; > +}; > + > +&lvds_bridge { > + /* IMX8MP_CLK_MEDIA_LDB = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */ > + assigned-clock-rates = <482300000>; > + status = "okay"; > + > + ports { > + port@1 { > + ldb_lvds_ch0: endpoint { > + remote-endpoint = <&panel_in_lvds0>; > + }; > + }; > + }; > +}; > + > +&media_blk_ctrl { > + /* currently it is not possible to let display clocks confugure > + * automatically, so we need to set them manually > + */ > + assigned-clock-rates = <500000000>, <200000000>, <0>, > + /* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */ > + <68900000>, > + /* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */ > + <964600000>; > +}; > + > +&pwm1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm1>; > + status = "okay"; > +}; > + > +&snvs_pwrkey { > + status = "okay"; > +}; > + > +&uart2 { > + /* console */ > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > + status = "okay"; > +}; > + > +&usb3_0 { > + status = "okay"; > +}; > + > +&usb3_1 { > + status = "okay"; > +}; > + > +&usb3_phy0 { > + vbus-supply = <&buck4>; > + status = "okay"; > +}; > + > +&usb3_phy1 { > + vbus-supply = <&buck4>; > + status = "okay"; > +}; > + > +&usb_dwc3_0 { > + dr_mode = "host"; > + status = "okay"; > +}; > + > +&usb_dwc3_1 { > + dr_mode = "host"; > + status = "okay"; > +}; > + > +/* SD Card */ > +&usdhc2 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; > + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; > + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; > + wp-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; > + vmmc-supply = <®_sd2_vsel>; > + bus-width = <4>; > + status = "okay"; > +}; > + > +/* eMMC */ > +&usdhc3 { > + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; > + assigned-clock-rates = <400000000>; > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; > + vmmc-supply = <&buck4>; > + vqmmc-supply = <&buck5>; > + bus-width = <8>; > + no-sd; > + no-sdio; > + non-removable; > + status = "okay"; > +}; > + > +&wdog1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdog>; > + fsl,ext-reset-output; > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl_backlight: backlightgrp { > + fsl,pins = < > + MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x0100 > + >; > + }; > + > + pinctrl_ecspi2: ecspi2grp { > + fsl,pins = < > + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44 > + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44 > + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44 > + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40 > + >; > + }; > + > + pinctrl_eqos: eqosgrp { > + fsl,pins = < > + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 > + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 > + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 > + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 > + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 > + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 > + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f > + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f > + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f > + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f > + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f > + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f > + >; > + }; > + > + pinctrl_flexcan1: flexcan1grp { > + fsl,pins = < > + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 > + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 > + >; > + }; > + > + pinctrl_flexcan1_reg: flexcan1reggrp { > + fsl,pins = < > + MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x154 > + >; > + }; > + > + pinctrl_flexcan2: flexcan2grp { > + fsl,pins = < > + MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154 > + MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX 0x154 > + >; > + }; > + > + pinctrl_flexcan2_reg: flexcan2reggrp { > + fsl,pins = < > + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x154 > + >; > + }; > + > + pinctrl_gpio_led: gpioledgrp { > + fsl,pins = < > + MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x19 > + MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x19 > + MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x19 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 > + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 > + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 > + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 > + >; > + }; > + > + pinctrl_i2c4: i2c4grp { > + fsl,pins = < > + MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3 > + MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3 > + >; > + }; > + > + pinctrl_pmic: pmicirqgrp { > + fsl,pins = < > + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x41 > + >; > + }; > + > + pinctrl_pwm1: pwm1grp { > + fsl,pins = < > + MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT 0x116 > + >; > + }; > + > + pinctrl_reg_sd2_vsel: regsd2vselgrp { > + fsl,pins = < > + MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04 0x41 > + >; > + }; > + > + pinctrl_rtc: rtcgrp { > + fsl,pins = < > + MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x41 > + >; > + }; > + > + pinctrl_switch: switchgrp { > + fsl,pins = < > + MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x41 > + MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x41 > + >; > + }; > + > + pinctrl_touchscreen: touchscreengrp { > + fsl,pins = < > + /* external 10 k pull up */ > + /* CTP_INT */ > + MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x41 > + /* CTP_RST */ > + MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x41 > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x14f > + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x14f > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 > + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 > + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 > + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 > + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 > + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 > + >; > + }; > + > + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { > + fsl,pins = < > + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 > + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 > + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 > + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 > + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 > + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 > + >; > + }; > + > + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { > + fsl,pins = < > + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 > + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 > + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 > + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 > + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 > + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 > + >; > + }; > + > + pinctrl_usdhc2_gpio: usdhc2gpiogrp { > + fsl,pins = < > + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 > + MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x1c4 > + MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B 0x1c4 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 > + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 > + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 > + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 > + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 > + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 > + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 > + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 > + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 > + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 > + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 > + >; > + }; > + > + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { > + fsl,pins = < > + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 > + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 > + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 > + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 > + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 > + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 > + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 > + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 > + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 > + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 > + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 > + >; > + }; > + > + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { > + fsl,pins = < > + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 > + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 > + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 > + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 > + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 > + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 > + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 > + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 > + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 > + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 > + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 > + >; > + }; > + > + pinctrl_wdog: wdoggrp { > + fsl,pins = < > + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 > + >; > + }; > +}; > -- > 2.39.2 > >
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index c6872b7e9471d..3a20565112673 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-reva.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dts new file mode 100644 index 0000000000000..a5b8731557ddb --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dts @@ -0,0 +1,711 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "imx8mp.dtsi" + +#include <dt-bindings/leds/common.h> + +/ { + model = "SKOV IMX8MP CPU revA - MI1010AIT-1CP1"; + compatible = "skov,imx8mp-skov-reva-mi1010ait-1cp1", "fsl,imx8mp"; + + aliases { + ethernet0 = &eqos; + ethernet1 = &lan1; + ethernet2 = &lan2; + rtc0 = &i2c_rtc; + rtc1 = &snvs_rtc; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm1 0 20000 0>; + power-supply = <®_24v0>; + enable-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + brightness-levels = <0 255>; + num-interpolated-steps = <17>; + default-brightness-level = <8>; + }; + + display { + compatible = "multi-inno,mi1010ait-1cp"; + backlight = <&backlight>; + power-supply = <&buck4>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&ldb_lvds_ch0>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + led-0 { + label = "D1"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_STATUS; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "D2"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + label = "D3"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_2v5: regulator-2v5 { + compatible = "regulator-fixed"; + vin-supply = <®_5v0>; + regulator-name = "2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_24v0: regulator-24v0 { + compatible = "regulator-fixed"; + regulator-name = "24v0"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + }; + + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + regulator-name = "can1-3v3"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; + }; + + reg_can2_stby: regulator-can2-stby { + compatible = "regulator-fixed"; + regulator-name = "can2-3v3"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 22 GPIO_ACTIVE_LOW>; + }; + + reg_sd2_vsel: regulator-sd2-vsel { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_sd2_vsel>; + regulator-name = "SD2_VSEL"; + regulator-type = "voltage"; + vin-supply = <&buck4>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + states = <3300000 0x1 1800000 0x0>; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + adc: adc@0 { + compatible = "microchip,mcp3002"; + reg = <0>; + vref-supply = <&buck4>; + spi-max-frequency = <1000000>; + #io-channel-cells = <1>; + }; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2_stby>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupts-extended = <&gpio1 3 IRQ_TYPE_EDGE_RISING>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + buck4: BUCK4 { /* VDD_3V3 */ + regulator-name = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5 { /* VDD_1V8 */ + regulator-name = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { /* NVCC_DRAM_1V1 */ + regulator-name = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { /* NVCC_SNVS_1V8 */ + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { /* VDDA_1V8 */ + regulator-name = "LDO3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { /* NVCC_SD2 */ + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <1280>; + touchscreen-size-y = <800>; + vcc-supply = <&buck4>; + iovcc-supply = <&buck4>; + wakeup-source; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + i2c_rtc: rtc@51 { + compatible = "nxp,pcf85063tp"; + reg = <0x51>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupts-extended = <&gpio4 31 IRQ_TYPE_EDGE_FALLING>; + quartz-load-femtofarads = <12500>; + + clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + switch@5f { + compatible = "microchip,ksz9893"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_switch>; + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + reg = <0x5f>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + lan1: port@0 { + reg = <0>; + phy-mode = "internal"; + label = "lan1"; + }; + + lan2: port@1 { + reg = <1>; + phy-mode = "internal"; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "cpu"; + ethernet = <&eqos>; + /* 2ns rgmii-rxid is implemented on PCB. + * Switch should add only rgmii-txid. + */ + phy-mode = "rgmii-txid"; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + /* IMX8MP_CLK_MEDIA_LDB = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */ + assigned-clock-rates = <482300000>; + status = "okay"; + + ports { + port@1 { + ldb_lvds_ch0: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&media_blk_ctrl { + /* currently it is not possible to let display clocks confugure + * automatically, so we need to set them manually + */ + assigned-clock-rates = <500000000>, <200000000>, <0>, + /* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */ + <68900000>, + /* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */ + <964600000>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart2 { + /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb3_phy0 { + vbus-supply = <&buck4>; + status = "okay"; +}; + +&usb3_phy1 { + vbus-supply = <&buck4>; + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +/* SD Card */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_sd2_vsel>; + bus-width = <4>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + vmmc-supply = <&buck4>; + vqmmc-supply = <&buck5>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x0100 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44 + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44 + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44 + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40 + >; + }; + + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 + >; + }; + + pinctrl_flexcan1_reg: flexcan1reggrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x154 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154 + MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX 0x154 + >; + }; + + pinctrl_flexcan2_reg: flexcan2reggrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x154 + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x19 + MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x19 + MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3 + MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x41 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT 0x116 + >; + }; + + pinctrl_reg_sd2_vsel: regsd2vselgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04 0x41 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x41 + >; + }; + + pinctrl_switch: switchgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x41 + MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x41 + >; + }; + + pinctrl_touchscreen: touchscreengrp { + fsl,pins = < + /* external 10 k pull up */ + /* CTP_INT */ + MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x41 + /* CTP_RST */ + MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x41 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x14f + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x14f + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 + MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x1c4 + MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B 0x1c4 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 + >; + }; +};
Add Skov i.MX8MP based climate controller. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8mp-skov-reva.dts | 711 ++++++++++++++++++ 2 files changed, 712 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dts