diff mbox series

[-next,01/11] gpio: cadence: Use helper function devm_clk_get_enabled()

Message ID 20230818093018.1051434-2-lizetao1@huawei.com (mailing list archive)
State New, archived
Headers show
Series gpio: Use devm_clk_get_*() helper function to simplify the drivers. | expand

Commit Message

lizetao Aug. 18, 2023, 9:30 a.m. UTC
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for
prepared and enabled clocks"), devm_clk_get() and clk_prepare_enable()
can now be replaced by devm_clk_get_enabled() when the driver enables
(and possibly prepares) the clocks for the whole lifetime of the device.
Moreover, it is no longer necessary to unprepare and disable the clocks
explicitly.

Signed-off-by: Li Zetao <lizetao1@huawei.com>
---
 drivers/gpio/gpio-cadence.c | 20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)

Comments

Andy Shevchenko Aug. 18, 2023, 1:49 p.m. UTC | #1
On Fri, Aug 18, 2023 at 05:30:08PM +0800, Li Zetao wrote:
> Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for
> prepared and enabled clocks"), devm_clk_get() and clk_prepare_enable()
> can now be replaced by devm_clk_get_enabled() when the driver enables
> (and possibly prepares) the clocks for the whole lifetime of the device.
> Moreover, it is no longer necessary to unprepare and disable the clocks
> explicitly.

...

> -			"Failed to retrieve peripheral clock, %d\n", ret);
> +			"Failed to retrieve and enable peripheral clock, %d\n",

In some drivers you changed the message in some not.
I suggest to avoid changing messages for now and do this separately.
Also consider switching them to use dev_err_probe() instead.
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-cadence.c b/drivers/gpio/gpio-cadence.c
index 3720b90cad10..a545baed9136 100644
--- a/drivers/gpio/gpio-cadence.c
+++ b/drivers/gpio/gpio-cadence.c
@@ -203,18 +203,12 @@  static int cdns_gpio_probe(struct platform_device *pdev)
 	cgpio->gc.request = cdns_gpio_request;
 	cgpio->gc.free = cdns_gpio_free;
 
-	cgpio->pclk = devm_clk_get(&pdev->dev, NULL);
+	cgpio->pclk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(cgpio->pclk)) {
 		ret = PTR_ERR(cgpio->pclk);
 		dev_err(&pdev->dev,
-			"Failed to retrieve peripheral clock, %d\n", ret);
-		goto err_revert_dir;
-	}
-
-	ret = clk_prepare_enable(cgpio->pclk);
-	if (ret) {
-		dev_err(&pdev->dev,
-			"Failed to enable the peripheral clock, %d\n", ret);
+			"Failed to retrieve and enable peripheral clock, %d\n",
+			ret);
 		goto err_revert_dir;
 	}
 
@@ -234,7 +228,7 @@  static int cdns_gpio_probe(struct platform_device *pdev)
 					     GFP_KERNEL);
 		if (!girq->parents) {
 			ret = -ENOMEM;
-			goto err_disable_clk;
+			goto err_revert_dir;
 		}
 		girq->parents[0] = irq;
 		girq->default_type = IRQ_TYPE_NONE;
@@ -244,7 +238,7 @@  static int cdns_gpio_probe(struct platform_device *pdev)
 	ret = devm_gpiochip_add_data(&pdev->dev, &cgpio->gc, cgpio);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
-		goto err_disable_clk;
+		goto err_revert_dir;
 	}
 
 	cgpio->bypass_orig = ioread32(cgpio->regs + CDNS_GPIO_BYPASS_MODE);
@@ -259,9 +253,6 @@  static int cdns_gpio_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, cgpio);
 	return 0;
 
-err_disable_clk:
-	clk_disable_unprepare(cgpio->pclk);
-
 err_revert_dir:
 	iowrite32(dir_prev, cgpio->regs + CDNS_GPIO_DIRECTION_MODE);
 
@@ -273,7 +264,6 @@  static int cdns_gpio_remove(struct platform_device *pdev)
 	struct cdns_gpio_chip *cgpio = platform_get_drvdata(pdev);
 
 	iowrite32(cgpio->bypass_orig, cgpio->regs + CDNS_GPIO_BYPASS_MODE);
-	clk_disable_unprepare(cgpio->pclk);
 
 	return 0;
 }