| Message ID | 20230819023132.23082-3-rohan.g.thomas@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | net: stmmac: Tx coe sw fallback | expand |
On Sat, Aug 19, 2023 at 10:31:32AM +0800, Rohan G Thomas wrote: > Add sw fallback of tx checksum calculation for those tx queues that > don't support tx checksum offloading. Because, some DWMAC IPs support > tx checksum offloading only for a few initial tx queues, starting > from tx queue 0. > > Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com> LGTM, Reviewed-by: Serge Semin <fancer.lancer@gmail.com> -Serge(y) > --- > .../net/ethernet/stmicro/stmmac/stmmac_main.c | 18 ++++++++++++++++++ > .../ethernet/stmicro/stmmac/stmmac_platform.c | 4 ++++ > include/linux/stmmac.h | 1 + > 3 files changed, 23 insertions(+) > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > index 733b5e900817..3ffef45a2861 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > @@ -4409,6 +4409,16 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) > WARN_ON(tx_q->tx_skbuff[first_entry]); > > csum_insertion = (skb->ip_summed == CHECKSUM_PARTIAL); > + /* Some DWMAC IPs support tx coe only for a few initial tx queues, > + * starting from tx queue 0. So checksum offloading for those queues > + * that don't support tx coe needs to fallback to software checksum > + * calculation. > + */ > + if (csum_insertion && queue >= priv->plat->tx_queues_with_coe) { > + if (unlikely(skb_checksum_help(skb))) > + goto dma_map_err; > + csum_insertion = !csum_insertion; > + } > > if (likely(priv->extend_desc)) > desc = (struct dma_desc *)(tx_q->dma_etx + entry); > @@ -7401,6 +7411,14 @@ int stmmac_dvr_probe(struct device *device, > dev_info(priv->device, "SPH feature enabled\n"); > } > > + if (priv->plat->tx_coe && !priv->plat->tx_queues_with_coe) > + priv->plat->tx_queues_with_coe = priv->plat->tx_queues_to_use; > + else if (!priv->plat->tx_coe) > + priv->plat->tx_queues_with_coe = 0; > + else if (priv->plat->tx_queues_with_coe < priv->plat->tx_queues_to_use) > + dev_info(priv->device, "TX COE only available for %u queues\n", > + priv->plat->tx_queues_with_coe); > + > /* Ideally our host DMA address width is the same as for the > * device. However, it may differ and then we have to use our > * host DMA width for allocation and the device DMA width for > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c > index be8e79c7aa34..0138b7c9c7ab 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c > @@ -225,6 +225,10 @@ static int stmmac_mtl_setup(struct platform_device *pdev, > &plat->tx_queues_to_use)) > plat->tx_queues_to_use = 1; > > + if (of_property_read_u32(tx_node, "snps,tx-queues-with-coe", > + &plat->tx_queues_with_coe)) > + plat->tx_queues_with_coe = plat->tx_queues_to_use; > + > if (of_property_read_bool(tx_node, "snps,tx-sched-wrr")) > plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR; > else if (of_property_read_bool(tx_node, "snps,tx-sched-wfq")) > diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h > index 784277d666eb..cb508164eaea 100644 > --- a/include/linux/stmmac.h > +++ b/include/linux/stmmac.h > @@ -252,6 +252,7 @@ struct plat_stmmacenet_data { > u32 host_dma_width; > u32 rx_queues_to_use; > u32 tx_queues_to_use; > + u32 tx_queues_with_coe; > u8 rx_sched_algorithm; > u8 tx_sched_algorithm; > struct stmmac_rxq_cfg rx_queues_cfg[MTL_MAX_RX_QUEUES]; > -- > 2.19.0 >
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 733b5e900817..3ffef45a2861 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -4409,6 +4409,16 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) WARN_ON(tx_q->tx_skbuff[first_entry]); csum_insertion = (skb->ip_summed == CHECKSUM_PARTIAL); + /* Some DWMAC IPs support tx coe only for a few initial tx queues, + * starting from tx queue 0. So checksum offloading for those queues + * that don't support tx coe needs to fallback to software checksum + * calculation. + */ + if (csum_insertion && queue >= priv->plat->tx_queues_with_coe) { + if (unlikely(skb_checksum_help(skb))) + goto dma_map_err; + csum_insertion = !csum_insertion; + } if (likely(priv->extend_desc)) desc = (struct dma_desc *)(tx_q->dma_etx + entry); @@ -7401,6 +7411,14 @@ int stmmac_dvr_probe(struct device *device, dev_info(priv->device, "SPH feature enabled\n"); } + if (priv->plat->tx_coe && !priv->plat->tx_queues_with_coe) + priv->plat->tx_queues_with_coe = priv->plat->tx_queues_to_use; + else if (!priv->plat->tx_coe) + priv->plat->tx_queues_with_coe = 0; + else if (priv->plat->tx_queues_with_coe < priv->plat->tx_queues_to_use) + dev_info(priv->device, "TX COE only available for %u queues\n", + priv->plat->tx_queues_with_coe); + /* Ideally our host DMA address width is the same as for the * device. However, it may differ and then we have to use our * host DMA width for allocation and the device DMA width for diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index be8e79c7aa34..0138b7c9c7ab 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -225,6 +225,10 @@ static int stmmac_mtl_setup(struct platform_device *pdev, &plat->tx_queues_to_use)) plat->tx_queues_to_use = 1; + if (of_property_read_u32(tx_node, "snps,tx-queues-with-coe", + &plat->tx_queues_with_coe)) + plat->tx_queues_with_coe = plat->tx_queues_to_use; + if (of_property_read_bool(tx_node, "snps,tx-sched-wrr")) plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR; else if (of_property_read_bool(tx_node, "snps,tx-sched-wfq")) diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 784277d666eb..cb508164eaea 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -252,6 +252,7 @@ struct plat_stmmacenet_data { u32 host_dma_width; u32 rx_queues_to_use; u32 tx_queues_to_use; + u32 tx_queues_with_coe; u8 rx_sched_algorithm; u8 tx_sched_algorithm; struct stmmac_rxq_cfg rx_queues_cfg[MTL_MAX_RX_QUEUES];
Add sw fallback of tx checksum calculation for those tx queues that don't support tx checksum offloading. Because, some DWMAC IPs support tx checksum offloading only for a few initial tx queues, starting from tx queue 0. Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com> --- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 18 ++++++++++++++++++ .../ethernet/stmicro/stmmac/stmmac_platform.c | 4 ++++ include/linux/stmmac.h | 1 + 3 files changed, 23 insertions(+)