diff mbox series

arm64: dts: imx8mq-librem5: Remove invalid charger properties

Message ID 20230908015130.610161-1-festevam@gmail.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: imx8mq-librem5: Remove invalid charger properties | expand

Commit Message

Fabio Estevam Sept. 8, 2023, 1:51 a.m. UTC 
From: Fabio Estevam <festevam@denx.de>

Per bq25890.yaml, 'phys', 'ti,use-vinmin-threshold', 'ti,vinmin-threshold'
are not valid properties.

Remove them to fix the following schema warning:

imx8mq-librem5-r2.dtb: charger@6a: Unevaluated properties are not allowed ('phys', 'ti,use-vinmin-threshold', 'ti,vinmin-threshold' were unexpected)
	from schema $id: http://devicetree.org/schemas/power/supply/bq25890.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 3 ---
 1 file changed, 3 deletions(-)

Comments

Shawn Guo Sept. 25, 2023, 1:56 a.m. UTC | #1 
On Thu, Sep 07, 2023 at 10:51:30PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> Per bq25890.yaml, 'phys', 'ti,use-vinmin-threshold', 'ti,vinmin-threshold'
> are not valid properties.
> 
> Remove them to fix the following schema warning:
> 
> imx8mq-librem5-r2.dtb: charger@6a: Unevaluated properties are not allowed ('phys', 'ti,use-vinmin-threshold', 'ti,vinmin-threshold' were unexpected)
> 	from schema $id: http://devicetree.org/schemas/power/supply/bq25890.yaml#
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 138a4d36a7ef..9be4ff4f9d62 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -1154,15 +1154,12 @@  bq25895: charger@6a {
 		pinctrl-0 = <&pinctrl_charger_in>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		phys = <&usb3_phy0>;
 		ti,battery-regulation-voltage = <4208000>; /* uV */
 		ti,termination-current = <128000>;  /* uA */
 		ti,precharge-current = <128000>; /* uA */
 		ti,minimum-sys-voltage = <3700000>; /* uV */
 		ti,boost-voltage = <5000000>; /* uV */
 		ti,boost-max-current = <1500000>; /* uA */
-		ti,use-vinmin-threshold = <1>; /* enable VINDPM */
-		ti,vinmin-threshold = <3900000>; /* uV */
 		monitored-battery = <&bat>;
 		power-supplies = <&typec_pd>;
 	};