diff mbox series

[08/17] pmdomain: qcom: Move Kconfig options to the pmdomain subsystem

Message ID 20230914111753.586627-1-ulf.hansson@linaro.org (mailing list archive)
State New, archived
Headers show
Series pmdomain: Move Kconfig options/files to the pmdomain subsystem | expand

Commit Message

Ulf Hansson Sept. 14, 2023, 11:17 a.m. UTC
The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the soc subsystem to the pmdomain subsystem.

Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: <linux-arm-msm@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 drivers/pmdomain/Kconfig      |  1 +
 drivers/pmdomain/qcom/Kconfig | 41 +++++++++++++++++++++++++++++++++++
 drivers/soc/qcom/Kconfig      | 37 -------------------------------
 3 files changed, 42 insertions(+), 37 deletions(-)
 create mode 100644 drivers/pmdomain/qcom/Kconfig

Comments

Konrad Dybcio Sept. 14, 2023, 11:37 a.m. UTC | #1
On 14.09.2023 13:17, Ulf Hansson wrote:
> The Kconfig options belongs closer to the corresponding implementations,
> hence let's move them from the soc subsystem to the pmdomain subsystem.
> 
> Cc: Bjorn Andersson <andersson@kernel.org>
> Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
> Cc: Andy Gross <agross@kernel.org>
> Cc: <linux-arm-msm@vger.kernel.org>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> ---
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
Bjorn Andersson Sept. 14, 2023, 4:11 p.m. UTC | #2
On Thu, Sep 14, 2023 at 01:17:53PM +0200, Ulf Hansson wrote:
> The Kconfig options belongs closer to the corresponding implementations,
> hence let's move them from the soc subsystem to the pmdomain subsystem.
> 
> Cc: Bjorn Andersson <andersson@kernel.org>
> Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
> Cc: Andy Gross <agross@kernel.org>
> Cc: <linux-arm-msm@vger.kernel.org>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Reviewed-by: Bjorn Andersson <andersson@kernel.org>

Regards,
Bjorn
diff mbox series

Patch

diff --git a/drivers/pmdomain/Kconfig b/drivers/pmdomain/Kconfig
index 5929f2d31588..d7b554c5c384 100644
--- a/drivers/pmdomain/Kconfig
+++ b/drivers/pmdomain/Kconfig
@@ -7,5 +7,6 @@  source "drivers/pmdomain/apple/Kconfig"
 source "drivers/pmdomain/bcm/Kconfig"
 source "drivers/pmdomain/imx/Kconfig"
 source "drivers/pmdomain/mediatek/Kconfig"
+source "drivers/pmdomain/qcom/Kconfig"
 
 endmenu
diff --git a/drivers/pmdomain/qcom/Kconfig b/drivers/pmdomain/qcom/Kconfig
new file mode 100644
index 000000000000..c67308337805
--- /dev/null
+++ b/drivers/pmdomain/qcom/Kconfig
@@ -0,0 +1,41 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Qualcomm Power Domains"
+
+config QCOM_CPR
+	tristate "QCOM Core Power Reduction (CPR) support"
+	depends on ARCH_QCOM && HAS_IOMEM
+	select PM_OPP
+	select REGMAP
+	help
+	  Say Y here to enable support for the CPR hardware found on Qualcomm
+	  SoCs like QCS404.
+
+	  This driver populates CPU OPPs tables and makes adjustments to the
+	  tables based on feedback from the CPR hardware. If you want to do
+	  CPUfrequency scaling say Y here.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called qcom-cpr
+
+config QCOM_RPMHPD
+	tristate "Qualcomm RPMh Power domain driver"
+	depends on QCOM_RPMH && QCOM_COMMAND_DB
+	help
+	  QCOM RPMh Power domain driver to support power-domains with
+	  performance states. The driver communicates a performance state
+	  value to RPMh which then translates it into corresponding voltage
+	  for the voltage rail.
+
+config QCOM_RPMPD
+	tristate "Qualcomm RPM Power domain driver"
+	depends on PM && OF
+	depends on QCOM_SMD_RPM
+	select PM_GENERIC_DOMAINS
+	select PM_GENERIC_DOMAINS_OF
+	help
+	  QCOM RPM Power domain driver to support power-domains with
+	  performance states. The driver communicates a performance state
+	  value to RPM which then translates it into corresponding voltage
+	  for the voltage rail.
+
+endmenu
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 715348869d04..b3634e10f6f5 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -26,22 +26,6 @@  config QCOM_COMMAND_DB
 	  resource on a RPM-hardened platform must use this database to get
 	  SoC specific identifier and information for the shared resources.
 
-config QCOM_CPR
-	tristate "QCOM Core Power Reduction (CPR) support"
-	depends on ARCH_QCOM && HAS_IOMEM
-	select PM_OPP
-	select REGMAP
-	help
-	  Say Y here to enable support for the CPR hardware found on Qualcomm
-	  SoCs like QCS404.
-
-	  This driver populates CPU OPPs tables and makes adjustments to the
-	  tables based on feedback from the CPR hardware. If you want to do
-	  CPUfrequency scaling say Y here.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called qcom-cpr
-
 config QCOM_GENI_SE
 	tristate "QCOM GENI Serial Engine Driver"
 	depends on ARCH_QCOM || COMPILE_TEST
@@ -157,27 +141,6 @@  config QCOM_RPMH
 	  of hardware components aggregate requests for these resources and
 	  help apply the aggregated state on the resource.
 
-config QCOM_RPMHPD
-	tristate "Qualcomm RPMh Power domain driver"
-	depends on QCOM_RPMH && QCOM_COMMAND_DB
-	help
-	  QCOM RPMh Power domain driver to support power-domains with
-	  performance states. The driver communicates a performance state
-	  value to RPMh which then translates it into corresponding voltage
-	  for the voltage rail.
-
-config QCOM_RPMPD
-	tristate "Qualcomm RPM Power domain driver"
-	depends on PM && OF
-	depends on QCOM_SMD_RPM
-	select PM_GENERIC_DOMAINS
-	select PM_GENERIC_DOMAINS_OF
-	help
-	  QCOM RPM Power domain driver to support power-domains with
-	  performance states. The driver communicates a performance state
-	  value to RPM which then translates it into corresponding voltage
-	  for the voltage rail.
-
 config QCOM_SMEM
 	tristate "Qualcomm Shared Memory Manager (SMEM)"
 	depends on ARCH_QCOM || COMPILE_TEST