| Message ID | 20230920085336.136238-1-wenst@chromium.org (mailing list archive) |
|---|---|
| State | Mainlined, archived |
| Headers | show |
| Series | [v2] regulator: mt6358: split ops for buck and linear range LDO regulators | expand |
On Wed, 20 Sep 2023 16:53:34 +0800, Chen-Yu Tsai wrote: > The buck and linear range LDO (VSRAM_*) regulators share one set of ops. > This set includes support for get/set mode. However this only makes > sense for buck regulators, not LDOs. The callbacks were not checking > whether the register offset and/or mask for mode setting was valid or > not. This ends up making the kernel report "normal" mode operation for > the LDOs. > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next Thanks! [1/1] regulator: mt6358: split ops for buck and linear range LDO regulators commit: 7e37c851374eca2d1f6128de03195c9f7b4baaf2 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
diff --git a/drivers/regulator/mt6358-regulator.c b/drivers/regulator/mt6358-regulator.c index b9cda2210c33..65fbd95f1dbb 100644 --- a/drivers/regulator/mt6358-regulator.c +++ b/drivers/regulator/mt6358-regulator.c @@ -43,7 +43,7 @@ struct mt6358_regulator_info { .desc = { \ .name = #vreg, \ .of_match = of_match_ptr(match), \ - .ops = &mt6358_volt_range_ops, \ + .ops = &mt6358_buck_ops, \ .type = REGULATOR_VOLTAGE, \ .id = MT6358_ID_##vreg, \ .owner = THIS_MODULE, \ @@ -139,7 +139,7 @@ struct mt6358_regulator_info { .desc = { \ .name = #vreg, \ .of_match = of_match_ptr(match), \ - .ops = &mt6358_volt_range_ops, \ + .ops = &mt6358_buck_ops, \ .type = REGULATOR_VOLTAGE, \ .id = MT6366_ID_##vreg, \ .owner = THIS_MODULE, \ @@ -450,7 +450,7 @@ static unsigned int mt6358_regulator_get_mode(struct regulator_dev *rdev) } } -static const struct regulator_ops mt6358_volt_range_ops = { +static const struct regulator_ops mt6358_buck_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .set_voltage_sel = regulator_set_voltage_sel_regmap, @@ -464,6 +464,18 @@ static const struct regulator_ops mt6358_volt_range_ops = { .get_mode = mt6358_regulator_get_mode, }; +static const struct regulator_ops mt6358_volt_range_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = mt6358_get_buck_voltage_sel, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6358_get_status, +}; + static const struct regulator_ops mt6358_volt_table_ops = { .list_voltage = regulator_list_voltage_table, .map_voltage = regulator_map_voltage_iterate,
The buck and linear range LDO (VSRAM_*) regulators share one set of ops. This set includes support for get/set mode. However this only makes sense for buck regulators, not LDOs. The callbacks were not checking whether the register offset and/or mask for mode setting was valid or not. This ends up making the kernel report "normal" mode operation for the LDOs. Create a new set of ops without the get/set mode callbacks for the linear range LDO regulators. Fixes: f67ff1bd58f0 ("regulator: mt6358: Add support for MT6358 regulator") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> --- Changes since v1: - Create a new set of ops for the LDOs, as suggested by Mark - Patch subject updated to match drivers/regulator/mt6358-regulator.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-)