Message ID | 20230922095348.22182-1-pablo.sun@mediatek.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v1] mmc: mtk-sd: Use readl_poll_timeout_atomic in msdc_reset_hw | expand |
On Fri, Sep 22, 2023 at 6:05 PM Pablo Sun <pablo.sun@mediatek.com> wrote: > > Use atomic readl_poll_timeout_atomic, because msdc_reset_hw > may be invoked in IRQ handler in the following context: > > msdc_irq() -> msdc_cmd_done() -> msdc_reset_hw() > > The following kernel BUG stack trace can be observed on > Genio 1200 EVK after initializing MSDC1 hardware during kernel boot: > > [ 1.187441] BUG: scheduling while atomic: swapper/0/0/0x00010002 > [ 1.189157] Modules linked in: > [ 1.204633] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.15.42-mtk+modified #1 > [ 1.205713] Hardware name: MediaTek Genio 1200 EVK-P1V2-EMMC (DT) > [ 1.206484] Call trace: > [ 1.206796] dump_backtrace+0x0/0x1ac > [ 1.207266] show_stack+0x24/0x30 > [ 1.207692] dump_stack_lvl+0x68/0x84 > [ 1.208162] dump_stack+0x1c/0x38 > [ 1.208587] __schedule_bug+0x68/0x80 > [ 1.209056] __schedule+0x6ec/0x7c0 > [ 1.209502] schedule+0x7c/0x110 > [ 1.209915] schedule_hrtimeout_range_clock+0xc4/0x1f0 > [ 1.210569] schedule_hrtimeout_range+0x20/0x30 > [ 1.211148] usleep_range_state+0x84/0xc0 > [ 1.211661] msdc_reset_hw+0xc8/0x1b0 > [ 1.212134] msdc_cmd_done.isra.0+0x4ac/0x5f0 > [ 1.212693] msdc_irq+0x104/0x2d4 > [ 1.213121] __handle_irq_event_percpu+0x68/0x280 > [ 1.213725] handle_irq_event+0x70/0x15c > [ 1.214230] handle_fasteoi_irq+0xb0/0x1a4 > [ 1.214755] handle_domain_irq+0x6c/0x9c > [ 1.215260] gic_handle_irq+0xc4/0x180 > [ 1.215741] call_on_irq_stack+0x2c/0x54 > [ 1.216245] do_interrupt_handler+0x5c/0x70 > [ 1.216782] el1_interrupt+0x30/0x80 > [ 1.217242] el1h_64_irq_handler+0x1c/0x2c > [ 1.217769] el1h_64_irq+0x78/0x7c > [ 1.218206] cpuidle_enter_state+0xc8/0x600 > [ 1.218744] cpuidle_enter+0x44/0x5c > [ 1.219205] do_idle+0x224/0x2d0 > [ 1.219624] cpu_startup_entry+0x30/0x80 > [ 1.220129] rest_init+0x108/0x134 > [ 1.220568] arch_call_rest_init+0x1c/0x28 > [ 1.221094] start_kernel+0x6c0/0x700 > [ 1.221564] __primary_switched+0xc0/0xc8 > > Fixes: ffaea6ebfe9c ("mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling") > Signed-off-by: Pablo Sun <pablo.sun@mediatek.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Il 22/09/23 11:53, Pablo Sun ha scritto: > Use atomic readl_poll_timeout_atomic, because msdc_reset_hw > may be invoked in IRQ handler in the following context: > > msdc_irq() -> msdc_cmd_done() -> msdc_reset_hw() > > The following kernel BUG stack trace can be observed on > Genio 1200 EVK after initializing MSDC1 hardware during kernel boot: > > [ 1.187441] BUG: scheduling while atomic: swapper/0/0/0x00010002 > [ 1.189157] Modules linked in: > [ 1.204633] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.15.42-mtk+modified #1 > [ 1.205713] Hardware name: MediaTek Genio 1200 EVK-P1V2-EMMC (DT) > [ 1.206484] Call trace: > [ 1.206796] dump_backtrace+0x0/0x1ac > [ 1.207266] show_stack+0x24/0x30 > [ 1.207692] dump_stack_lvl+0x68/0x84 > [ 1.208162] dump_stack+0x1c/0x38 > [ 1.208587] __schedule_bug+0x68/0x80 > [ 1.209056] __schedule+0x6ec/0x7c0 > [ 1.209502] schedule+0x7c/0x110 > [ 1.209915] schedule_hrtimeout_range_clock+0xc4/0x1f0 > [ 1.210569] schedule_hrtimeout_range+0x20/0x30 > [ 1.211148] usleep_range_state+0x84/0xc0 > [ 1.211661] msdc_reset_hw+0xc8/0x1b0 > [ 1.212134] msdc_cmd_done.isra.0+0x4ac/0x5f0 > [ 1.212693] msdc_irq+0x104/0x2d4 > [ 1.213121] __handle_irq_event_percpu+0x68/0x280 > [ 1.213725] handle_irq_event+0x70/0x15c > [ 1.214230] handle_fasteoi_irq+0xb0/0x1a4 > [ 1.214755] handle_domain_irq+0x6c/0x9c > [ 1.215260] gic_handle_irq+0xc4/0x180 > [ 1.215741] call_on_irq_stack+0x2c/0x54 > [ 1.216245] do_interrupt_handler+0x5c/0x70 > [ 1.216782] el1_interrupt+0x30/0x80 > [ 1.217242] el1h_64_irq_handler+0x1c/0x2c > [ 1.217769] el1h_64_irq+0x78/0x7c > [ 1.218206] cpuidle_enter_state+0xc8/0x600 > [ 1.218744] cpuidle_enter+0x44/0x5c > [ 1.219205] do_idle+0x224/0x2d0 > [ 1.219624] cpu_startup_entry+0x30/0x80 > [ 1.220129] rest_init+0x108/0x134 > [ 1.220568] arch_call_rest_init+0x1c/0x28 > [ 1.221094] start_kernel+0x6c0/0x700 > [ 1.221564] __primary_switched+0xc0/0xc8 > > Fixes: ffaea6ebfe9c ("mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling") > Signed-off-by: Pablo Sun <pablo.sun@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioachino.delregno@collabora.com>
On Fri, 22 Sept 2023 at 11:54, Pablo Sun <pablo.sun@mediatek.com> wrote: > > Use atomic readl_poll_timeout_atomic, because msdc_reset_hw > may be invoked in IRQ handler in the following context: > > msdc_irq() -> msdc_cmd_done() -> msdc_reset_hw() > > The following kernel BUG stack trace can be observed on > Genio 1200 EVK after initializing MSDC1 hardware during kernel boot: > > [ 1.187441] BUG: scheduling while atomic: swapper/0/0/0x00010002 > [ 1.189157] Modules linked in: > [ 1.204633] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.15.42-mtk+modified #1 > [ 1.205713] Hardware name: MediaTek Genio 1200 EVK-P1V2-EMMC (DT) > [ 1.206484] Call trace: > [ 1.206796] dump_backtrace+0x0/0x1ac > [ 1.207266] show_stack+0x24/0x30 > [ 1.207692] dump_stack_lvl+0x68/0x84 > [ 1.208162] dump_stack+0x1c/0x38 > [ 1.208587] __schedule_bug+0x68/0x80 > [ 1.209056] __schedule+0x6ec/0x7c0 > [ 1.209502] schedule+0x7c/0x110 > [ 1.209915] schedule_hrtimeout_range_clock+0xc4/0x1f0 > [ 1.210569] schedule_hrtimeout_range+0x20/0x30 > [ 1.211148] usleep_range_state+0x84/0xc0 > [ 1.211661] msdc_reset_hw+0xc8/0x1b0 > [ 1.212134] msdc_cmd_done.isra.0+0x4ac/0x5f0 > [ 1.212693] msdc_irq+0x104/0x2d4 > [ 1.213121] __handle_irq_event_percpu+0x68/0x280 > [ 1.213725] handle_irq_event+0x70/0x15c > [ 1.214230] handle_fasteoi_irq+0xb0/0x1a4 > [ 1.214755] handle_domain_irq+0x6c/0x9c > [ 1.215260] gic_handle_irq+0xc4/0x180 > [ 1.215741] call_on_irq_stack+0x2c/0x54 > [ 1.216245] do_interrupt_handler+0x5c/0x70 > [ 1.216782] el1_interrupt+0x30/0x80 > [ 1.217242] el1h_64_irq_handler+0x1c/0x2c > [ 1.217769] el1h_64_irq+0x78/0x7c > [ 1.218206] cpuidle_enter_state+0xc8/0x600 > [ 1.218744] cpuidle_enter+0x44/0x5c > [ 1.219205] do_idle+0x224/0x2d0 > [ 1.219624] cpu_startup_entry+0x30/0x80 > [ 1.220129] rest_init+0x108/0x134 > [ 1.220568] arch_call_rest_init+0x1c/0x28 > [ 1.221094] start_kernel+0x6c0/0x700 > [ 1.221564] __primary_switched+0xc0/0xc8 > > Fixes: ffaea6ebfe9c ("mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling") > Signed-off-by: Pablo Sun <pablo.sun@mediatek.com> Applied for fixes and by adding a stable tag, thanks! Kind regards Uffe > --- > drivers/mmc/host/mtk-sd.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c > index 5392200cfdf7..97f7c3d4be6e 100644 > --- a/drivers/mmc/host/mtk-sd.c > +++ b/drivers/mmc/host/mtk-sd.c > @@ -669,11 +669,11 @@ static void msdc_reset_hw(struct msdc_host *host) > u32 val; > > sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_RST); > - readl_poll_timeout(host->base + MSDC_CFG, val, !(val & MSDC_CFG_RST), 0, 0); > + readl_poll_timeout_atomic(host->base + MSDC_CFG, val, !(val & MSDC_CFG_RST), 0, 0); > > sdr_set_bits(host->base + MSDC_FIFOCS, MSDC_FIFOCS_CLR); > - readl_poll_timeout(host->base + MSDC_FIFOCS, val, > - !(val & MSDC_FIFOCS_CLR), 0, 0); > + readl_poll_timeout_atomic(host->base + MSDC_FIFOCS, val, > + !(val & MSDC_FIFOCS_CLR), 0, 0); > > val = readl(host->base + MSDC_INT); > writel(val, host->base + MSDC_INT); > -- > 2.18.0 >
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 5392200cfdf7..97f7c3d4be6e 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -669,11 +669,11 @@ static void msdc_reset_hw(struct msdc_host *host) u32 val; sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_RST); - readl_poll_timeout(host->base + MSDC_CFG, val, !(val & MSDC_CFG_RST), 0, 0); + readl_poll_timeout_atomic(host->base + MSDC_CFG, val, !(val & MSDC_CFG_RST), 0, 0); sdr_set_bits(host->base + MSDC_FIFOCS, MSDC_FIFOCS_CLR); - readl_poll_timeout(host->base + MSDC_FIFOCS, val, - !(val & MSDC_FIFOCS_CLR), 0, 0); + readl_poll_timeout_atomic(host->base + MSDC_FIFOCS, val, + !(val & MSDC_FIFOCS_CLR), 0, 0); val = readl(host->base + MSDC_INT); writel(val, host->base + MSDC_INT);
Use atomic readl_poll_timeout_atomic, because msdc_reset_hw may be invoked in IRQ handler in the following context: msdc_irq() -> msdc_cmd_done() -> msdc_reset_hw() The following kernel BUG stack trace can be observed on Genio 1200 EVK after initializing MSDC1 hardware during kernel boot: [ 1.187441] BUG: scheduling while atomic: swapper/0/0/0x00010002 [ 1.189157] Modules linked in: [ 1.204633] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.15.42-mtk+modified #1 [ 1.205713] Hardware name: MediaTek Genio 1200 EVK-P1V2-EMMC (DT) [ 1.206484] Call trace: [ 1.206796] dump_backtrace+0x0/0x1ac [ 1.207266] show_stack+0x24/0x30 [ 1.207692] dump_stack_lvl+0x68/0x84 [ 1.208162] dump_stack+0x1c/0x38 [ 1.208587] __schedule_bug+0x68/0x80 [ 1.209056] __schedule+0x6ec/0x7c0 [ 1.209502] schedule+0x7c/0x110 [ 1.209915] schedule_hrtimeout_range_clock+0xc4/0x1f0 [ 1.210569] schedule_hrtimeout_range+0x20/0x30 [ 1.211148] usleep_range_state+0x84/0xc0 [ 1.211661] msdc_reset_hw+0xc8/0x1b0 [ 1.212134] msdc_cmd_done.isra.0+0x4ac/0x5f0 [ 1.212693] msdc_irq+0x104/0x2d4 [ 1.213121] __handle_irq_event_percpu+0x68/0x280 [ 1.213725] handle_irq_event+0x70/0x15c [ 1.214230] handle_fasteoi_irq+0xb0/0x1a4 [ 1.214755] handle_domain_irq+0x6c/0x9c [ 1.215260] gic_handle_irq+0xc4/0x180 [ 1.215741] call_on_irq_stack+0x2c/0x54 [ 1.216245] do_interrupt_handler+0x5c/0x70 [ 1.216782] el1_interrupt+0x30/0x80 [ 1.217242] el1h_64_irq_handler+0x1c/0x2c [ 1.217769] el1h_64_irq+0x78/0x7c [ 1.218206] cpuidle_enter_state+0xc8/0x600 [ 1.218744] cpuidle_enter+0x44/0x5c [ 1.219205] do_idle+0x224/0x2d0 [ 1.219624] cpu_startup_entry+0x30/0x80 [ 1.220129] rest_init+0x108/0x134 [ 1.220568] arch_call_rest_init+0x1c/0x28 [ 1.221094] start_kernel+0x6c0/0x700 [ 1.221564] __primary_switched+0xc0/0xc8 Fixes: ffaea6ebfe9c ("mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling") Signed-off-by: Pablo Sun <pablo.sun@mediatek.com> --- drivers/mmc/host/mtk-sd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)