diff mbox series

ARM: dts: vfxxx: Write dmas in a single line

Message ID 20230926144004.396502-1-festevam@gmail.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: vfxxx: Write dmas in a single line | expand

Commit Message

Fabio Estevam Sept. 26, 2023, 2:40 p.m. UTC 
From: Fabio Estevam <festevam@denx.de>

There is no need to split dmas in two lines.

Make it more readable by writing it in a single line.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
 arch/arm/boot/dts/nxp/vf/vfxxx.dtsi | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)

Comments

Shawn Guo Oct. 10, 2023, 1:11 a.m. UTC | #1 
On Tue, Sep 26, 2023 at 11:40:04AM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> There is no need to split dmas in two lines.
> 
> Make it more readable by writing it in a single line.
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
index d1095b700c56..acccf9a3c898 100644
--- a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
@@ -111,8 +111,7 @@  uart0: serial@40027000 {
 				interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART0>;
 				clock-names = "ipg";
-				dmas = <&edma0 0 2>,
-					<&edma0 0 3>;
+				dmas = <&edma0 0 2>, <&edma0 0 3>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
@@ -123,8 +122,7 @@  uart1: serial@40028000 {
 				interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART1>;
 				clock-names = "ipg";
-				dmas = <&edma0 0 4>,
-					<&edma0 0 5>;
+				dmas = <&edma0 0 4>, <&edma0 0 5>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
@@ -135,8 +133,7 @@  uart2: serial@40029000 {
 				interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART2>;
 				clock-names = "ipg";
-				dmas = <&edma0 0 6>,
-					<&edma0 0 7>;
+				dmas = <&edma0 0 6>, <&edma0 0 7>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
@@ -147,8 +144,7 @@  uart3: serial@4002a000 {
 				interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART3>;
 				clock-names = "ipg";
-				dmas = <&edma0 0 8>,
-					<&edma0 0 9>;
+				dmas = <&edma0 0 8>, <&edma0 0 9>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
@@ -162,8 +158,7 @@  dspi0: spi@4002c000 {
 				clocks = <&clks VF610_CLK_DSPI0>;
 				clock-names = "dspi";
 				spi-num-chipselects = <6>;
-				dmas = <&edma1 1 12>,
-					<&edma1 1 13>;
+				dmas = <&edma1 1 12>, <&edma1 1 13>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -177,8 +172,7 @@  dspi1: spi@4002d000 {
 				clocks = <&clks VF610_CLK_DSPI1>;
 				clock-names = "dspi";
 				spi-num-chipselects = <4>;
-				dmas = <&edma1 1 14>,
-					<&edma1 1 15>;
+				dmas = <&edma1 1 14>, <&edma1 1 15>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -426,8 +420,7 @@  i2c1: i2c@40067000 {
 				interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_I2C1>;
 				clock-names = "ipg";
-				dmas = <&edma0 0 52>,
-					<&edma0 0 53>;
+				dmas = <&edma0 0 52>, <&edma0 0 53>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
@@ -551,8 +544,7 @@  dspi3: spi@400ad000 {
 				clocks = <&clks VF610_CLK_DSPI3>;
 				clock-names = "dspi";
 				spi-num-chipselects = <2>;
-				dmas = <&edma1 0 12>,
-					<&edma1 0 13>;
+				dmas = <&edma1 0 12>, <&edma1 0 13>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -719,8 +711,7 @@  i2c3: i2c@400e7000 {
 				interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_I2C3>;
 				clock-names = "ipg";
-				dmas = <&edma0 1 38>,
-					<&edma0 1 39>;
+				dmas = <&edma0 1 38>, <&edma0 1 39>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};