diff mbox series

[2/2] ARM: dts: stm32: add SDIO pinctrl sleep support on stm32f7 boards

Message ID 20231002171339.1594470-3-ben.wolsieffer@hefring.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: stm32: add SDIO pinctrl sleep support on stm32f7 | expand

Commit Message

Ben Wolsieffer Oct. 2, 2023, 5:13 p.m. UTC 
Use the new analog mode SDIO pin definitions on the STM32F7 boards.

Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
---
 arch/arm/boot/dts/st/stm32746g-eval.dts  | 3 ++-
 arch/arm/boot/dts/st/stm32f746-disco.dts | 3 ++-
 arch/arm/boot/dts/st/stm32f769-disco.dts | 3 ++-
 3 files changed, 6 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/st/stm32746g-eval.dts b/arch/arm/boot/dts/st/stm32746g-eval.dts
index a293e65141c6..e9ac37b6eca0 100644
--- a/arch/arm/boot/dts/st/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/st/stm32746g-eval.dts
@@ -188,9 +188,10 @@  &sdio1 {
 	status = "okay";
 	vmmc-supply = <&mmc_vcard>;
 	broken-cd;
-	pinctrl-names = "default", "opendrain";
+	pinctrl-names = "default", "opendrain", "sleep";
 	pinctrl-0 = <&sdio_pins_a>;
 	pinctrl-1 = <&sdio_pins_od_a>;
+	pinctrl-2 = <&sdio_pins_sleep_a>;
 	bus-width = <4>;
 };
 
diff --git a/arch/arm/boot/dts/st/stm32f746-disco.dts b/arch/arm/boot/dts/st/stm32f746-disco.dts
index c11616ed5fc6..b50461d676a7 100644
--- a/arch/arm/boot/dts/st/stm32f746-disco.dts
+++ b/arch/arm/boot/dts/st/stm32f746-disco.dts
@@ -103,9 +103,10 @@  &sdio1 {
 	status = "okay";
 	vmmc-supply = <&mmc_vcard>;
 	cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default", "opendrain";
+	pinctrl-names = "default", "opendrain", "sleep";
 	pinctrl-0 = <&sdio_pins_a>;
 	pinctrl-1 = <&sdio_pins_od_a>;
+	pinctrl-2 = <&sdio_pins_sleep_a>;
 	bus-width = <4>;
 };
 
diff --git a/arch/arm/boot/dts/st/stm32f769-disco.dts b/arch/arm/boot/dts/st/stm32f769-disco.dts
index b038d0ed39e8..5d12ae25b327 100644
--- a/arch/arm/boot/dts/st/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/st/stm32f769-disco.dts
@@ -131,9 +131,10 @@  &sdio2 {
 	vmmc-supply = <&mmc_vcard>;
 	cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
 	broken-cd;
-	pinctrl-names = "default", "opendrain";
+	pinctrl-names = "default", "opendrain", "sleep";
 	pinctrl-0 = <&sdio_pins_b>;
 	pinctrl-1 = <&sdio_pins_od_b>;
+	pinctrl-2 = <&sdio_pins_sleep_b>;
 	bus-width = <4>;
 };