diff mbox series

[V2,4/4] arm64: dts: imx8mp-beacon: Add DMIC support

Message ID 20231004234657.44592-4-aford173@gmail.com (mailing list archive)
State New, archived
Headers show
Series [V2,1/4] arm64: dts: imx8mm-beacon: Migrate sound card to simple-audio-card | expand

Commit Message

Adam Ford Oct. 4, 2023, 11:46 p.m. UTC
The baseboard has a connector for a pulse density microphone.
This is connected via the micfil interface and uses the DMIC
audio codec with the simple-audio-card.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
V2:  No Change

Comments

Fabio Estevam Oct. 5, 2023, 6:33 p.m. UTC | #1
On Wed, Oct 4, 2023 at 8:47 PM Adam Ford <aford173@gmail.com> wrote:
>
> The baseboard has a connector for a pulse density microphone.
> This is connected via the micfil interface and uses the DMIC
> audio codec with the simple-audio-card.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>

Reviewed-by: Fabio Estevam <festevam@gmail.com>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
index acd265d8b58e..ee64c6ffb551 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
@@ -49,6 +49,12 @@  ss_ep: endpoint {
 		};
 	};
 
+	dmic_codec: dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <1>;
+		#sound-dai-cells = <0>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -147,6 +153,22 @@  reg_usb1_host_vbus: regulator-usb1-vbus {
 		enable-active-high;
 	};
 
+	sound-dmic {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sound-pdm";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+
+		dailink_master: simple-audio-card,cpu {
+			sound-dai = <&micfil>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&dmic_codec>;
+		};
+	};
+
 	sound-wm8962 {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "wm8962";
@@ -174,6 +196,11 @@  simple-audio-card,codec {
 	};
 };
 
+&audio_blk_ctrl {
+	assigned-clocks = <&clk IMX8MP_AUDIO_PLL1>, <&clk IMX8MP_AUDIO_PLL2>;
+	assigned-clock-rates = <393216000>, <135475200>;
+};
+
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
@@ -364,6 +391,15 @@  hd3ss3220_out_ep: endpoint {
 	};
 };
 
+&micfil {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX8MP_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <49152000>;
+	status = "okay";
+};
+
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
@@ -545,6 +581,13 @@  MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x10	/* PCIe_nRST */
 		>;
 	};
 
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_PDM_CLK		0xd6
+			MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_PDM_BIT_STREAM00	0xd6
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40