diff mbox series

[v4,1/2] ARM: dts: sun7i: Add Iteaduino Plus A20

Message ID 20231006090154.9289-1-julian.ribbeck@gmx.de (mailing list archive)
State New, archived
Headers show
Series [v4,1/2] ARM: dts: sun7i: Add Iteaduino Plus A20 | expand

Commit Message

Julian Ribbeck Oct. 6, 2023, 9:01 a.m. UTC 
Iteaduino Plus A20 is very similar to Iteaduino Plus A10. In fact it
shares the same breakout board and the Itead Core A20 on top of it, is
only adapted to support the dual-core A20.

This commits enables the following hardware:

* HDMI Video output
* USB
* SATA (untested due to lack of hardware I could attach)
* Ethernet
* MMC storage
* UART
* USB OTG (untested, because I don't own an USB OTG cable/device)

Signed-off-by: Julian Ribbeck <julian.ribbeck@gmx.de>
---
 arch/arm/boot/dts/allwinner/Makefile          |   1 +
 .../sun7i-a20-itead-iteaduino-plus.dts        | 104 ++++++++++++++++++
 2 files changed, 105 insertions(+)
 create mode 100644 arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts

--
2.42.0

Comments

Jernej Škrabec Oct. 13, 2023, 7:18 p.m. UTC | #1 
Dne petek, 06. oktober 2023 ob 11:01:30 CEST je Julian Ribbeck napisal(a):
> Iteaduino Plus A20 is very similar to Iteaduino Plus A10. In fact it
> shares the same breakout board and the Itead Core A20 on top of it, is
> only adapted to support the dual-core A20.
> 
> This commits enables the following hardware:
> 
> * HDMI Video output
> * USB
> * SATA (untested due to lack of hardware I could attach)
> * Ethernet
> * MMC storage
> * UART
> * USB OTG (untested, because I don't own an USB OTG cable/device)
> 
> Signed-off-by: Julian Ribbeck <julian.ribbeck@gmx.de>
> ---
>  arch/arm/boot/dts/allwinner/Makefile          |   1 +
>  .../sun7i-a20-itead-iteaduino-plus.dts        | 104 ++++++++++++++++++
>  2 files changed, 105 insertions(+)
>  create mode 100644 arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts
> 
> diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile
> index eebb5a0c873a..39af5ad94590 100644
> --- a/arch/arm/boot/dts/allwinner/Makefile
> +++ b/arch/arm/boot/dts/allwinner/Makefile
> @@ -124,6 +124,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
>  	sun7i-a20-haoyu-marsboard.dtb \
>  	sun7i-a20-hummingbird.dtb \
>  	sun7i-a20-itead-ibox.dtb \
> +	sun7i-a20-itead-iteaduino-plus.dts \

This should be .dtb.

Other than that:
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>

I'll fix it while applying.

For future reference, please follow proper patch submission procedure:
- each revision should be sent in separate thread
- each new revision should contain changelog, either in cover letter (when
there is more than one patch) or below --- line in each patch
- compatible description patch comes before first usage (I'll invert order
when applying)

Best regards,
Jernej

>  	sun7i-a20-i12-tvbox.dtb \
>  	sun7i-a20-icnova-a20-adb4006.dtb \
>  	sun7i-a20-icnova-swac.dtb \
> diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts
> new file mode 100644
> index 000000000000..c9f9b0275381
> --- /dev/null
> +++ b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts
> @@ -0,0 +1,104 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +
> +/dts-v1/;
> +#include "sun7i-a20.dtsi"
> +#include "sunxi-itead-core-common.dtsi"
> +
> +/ {
> +	model = "Itead Iteaduino Plus A20";
> +	compatible = "itead,iteaduino-plus-a20", "allwinner,sun7i-a20";
> +
> +	hdmi-connector {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi_con_in: endpoint {
> +				remote-endpoint = <&hdmi_out_con>;
> +			};
> +		};
> +	};
> +};
> +
> +&ac_power_supply {
> +	status = "okay";
> +};
> +
> +&ahci {
> +	target-supply = <&reg_ahci_5v>;
> +	status = "okay";
> +};
> +
> +&axp209 {
> +	interrupt-parent = <&nmi_intc>;
> +	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> +};
> +
> +&battery_power_supply {
> +	status = "okay";
> +};
> +
> +&codec {
> +	stauts = "okay";
> +};
> +
> +&de {
> +	status = "okay";
> +};
> +
> +&emac {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&emac_pa_pins>;
> +	phy-handle = <&phy1>;
> +	status = "okay";
> +};
> +
> +&emac_sram {
> +	status = "okay";
> +};
> +
> +&hdmi {
> +	status = "okay";
> +};
> +
> +&hdmi_out {
> +	hdmi_out_con: endpoint {
> +		remote-endpoint = <&hdmi_con_in>;
> +	};
> +};
> +
> +&mdio {
> +	status = "okay";
> +
> +	phy1: ethernet-phy@1 {
> +		reg = <1>;
> +	};
> +};
> +
> +&mmc0 {
> +	vmmc-supply = <&reg_vcc3v3>;
> +	bus-width = <4>;
> +	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
> +	status = "okay";
> +};
> +
> +&otg_sram {
> +	status = "okay";
> +};
> +
> +&reg_ahci_5v {
> +	status = "okay";
> +};
> +
> +&reg_usb0_vbus {
> +	status = "okay";
> +};
> +
> +&usb_otg {
> +	status = "okay";
> +	dr_mode = "host";
> +};
> +
> +&usbphy {
> +	usb0_vbus-supply = <&reg_usb0_vbus>;
> +};
> --
> 2.42.0
> 
>
Jernej Škrabec Oct. 13, 2023, 7:21 p.m. UTC | #2 
Dne petek, 13. oktober 2023 ob 21:18:00 CEST je Jernej Škrabec napisal(a):
> Dne petek, 06. oktober 2023 ob 11:01:30 CEST je Julian Ribbeck napisal(a):
> > Iteaduino Plus A20 is very similar to Iteaduino Plus A10. In fact it
> > shares the same breakout board and the Itead Core A20 on top of it, is
> > only adapted to support the dual-core A20.
> > 
> > This commits enables the following hardware:
> > 
> > * HDMI Video output
> > * USB
> > * SATA (untested due to lack of hardware I could attach)
> > * Ethernet
> > * MMC storage
> > * UART
> > * USB OTG (untested, because I don't own an USB OTG cable/device)
> > 
> > Signed-off-by: Julian Ribbeck <julian.ribbeck@gmx.de>
> > ---
> >  arch/arm/boot/dts/allwinner/Makefile          |   1 +
> >  .../sun7i-a20-itead-iteaduino-plus.dts        | 104 ++++++++++++++++++
> >  2 files changed, 105 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts
> > 
> > diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile
> > index eebb5a0c873a..39af5ad94590 100644
> > --- a/arch/arm/boot/dts/allwinner/Makefile
> > +++ b/arch/arm/boot/dts/allwinner/Makefile
> > @@ -124,6 +124,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
> >  	sun7i-a20-haoyu-marsboard.dtb \
> >  	sun7i-a20-hummingbird.dtb \
> >  	sun7i-a20-itead-ibox.dtb \
> > +	sun7i-a20-itead-iteaduino-plus.dts \
> 
> This should be .dtb.
> 
> Other than that:
> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> 
> I'll fix it while applying.
> 
> For future reference, please follow proper patch submission procedure:
> - each revision should be sent in separate thread
> - each new revision should contain changelog, either in cover letter (when
> there is more than one patch) or below --- line in each patch
> - compatible description patch comes before first usage (I'll invert order
> when applying)

Sorry, I won't apply it as yet. How was this tested if it didn't even built due
to mistake in Makefile?

Best regards,
Jernej

> 
> Best regards,
> Jernej
> 
> >  	sun7i-a20-i12-tvbox.dtb \
> >  	sun7i-a20-icnova-a20-adb4006.dtb \
> >  	sun7i-a20-icnova-swac.dtb \
> > diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts
> > new file mode 100644
> > index 000000000000..c9f9b0275381
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts
> > @@ -0,0 +1,104 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> > +
> > +/dts-v1/;
> > +#include "sun7i-a20.dtsi"
> > +#include "sunxi-itead-core-common.dtsi"
> > +
> > +/ {
> > +	model = "Itead Iteaduino Plus A20";
> > +	compatible = "itead,iteaduino-plus-a20", "allwinner,sun7i-a20";
> > +
> > +	hdmi-connector {
> > +		compatible = "hdmi-connector";
> > +		type = "a";
> > +
> > +		port {
> > +			hdmi_con_in: endpoint {
> > +				remote-endpoint = <&hdmi_out_con>;
> > +			};
> > +		};
> > +	};
> > +};
> > +
> > +&ac_power_supply {
> > +	status = "okay";
> > +};
> > +
> > +&ahci {
> > +	target-supply = <&reg_ahci_5v>;
> > +	status = "okay";
> > +};
> > +
> > +&axp209 {
> > +	interrupt-parent = <&nmi_intc>;
> > +	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> > +};
> > +
> > +&battery_power_supply {
> > +	status = "okay";
> > +};
> > +
> > +&codec {
> > +	stauts = "okay";
> > +};
> > +
> > +&de {
> > +	status = "okay";
> > +};
> > +
> > +&emac {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&emac_pa_pins>;
> > +	phy-handle = <&phy1>;
> > +	status = "okay";
> > +};
> > +
> > +&emac_sram {
> > +	status = "okay";
> > +};
> > +
> > +&hdmi {
> > +	status = "okay";
> > +};
> > +
> > +&hdmi_out {
> > +	hdmi_out_con: endpoint {
> > +		remote-endpoint = <&hdmi_con_in>;
> > +	};
> > +};
> > +
> > +&mdio {
> > +	status = "okay";
> > +
> > +	phy1: ethernet-phy@1 {
> > +		reg = <1>;
> > +	};
> > +};
> > +
> > +&mmc0 {
> > +	vmmc-supply = <&reg_vcc3v3>;
> > +	bus-width = <4>;
> > +	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
> > +	status = "okay";
> > +};
> > +
> > +&otg_sram {
> > +	status = "okay";
> > +};
> > +
> > +&reg_ahci_5v {
> > +	status = "okay";
> > +};
> > +
> > +&reg_usb0_vbus {
> > +	status = "okay";
> > +};
> > +
> > +&usb_otg {
> > +	status = "okay";
> > +	dr_mode = "host";
> > +};
> > +
> > +&usbphy {
> > +	usb0_vbus-supply = <&reg_usb0_vbus>;
> > +};
> > --
> > 2.42.0
> > 
> > 
> 
> 
> 
> 
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile
index eebb5a0c873a..39af5ad94590 100644
--- a/arch/arm/boot/dts/allwinner/Makefile
+++ b/arch/arm/boot/dts/allwinner/Makefile
@@ -124,6 +124,7 @@  dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-haoyu-marsboard.dtb \
 	sun7i-a20-hummingbird.dtb \
 	sun7i-a20-itead-ibox.dtb \
+	sun7i-a20-itead-iteaduino-plus.dts \
 	sun7i-a20-i12-tvbox.dtb \
 	sun7i-a20-icnova-a20-adb4006.dtb \
 	sun7i-a20-icnova-swac.dtb \
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts
new file mode 100644
index 000000000000..c9f9b0275381
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-iteaduino-plus.dts
@@ -0,0 +1,104 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-itead-core-common.dtsi"
+
+/ {
+	model = "Itead Iteaduino Plus A20";
+	compatible = "itead,iteaduino-plus-a20", "allwinner,sun7i-a20";
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&axp209 {
+	interrupt-parent = <&nmi_intc>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&codec {
+	stauts = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pa_pins>;
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+};