diff mbox series

[v6,2/2] firmware: arm_scmi: Add qcom smc/hvc transport support

Message ID 20231009191437.27926-3-quic_nkela@quicinc.com (mailing list archive)
State New, archived
Headers show
Series [v6,1/2] dt-bindings: arm: Add new compatible for smc/hvc transport for SCMI | expand

Commit Message

Nikunj Kela Oct. 9, 2023, 7:14 p.m. UTC
This change adds the support for SCMI message exchange on Qualcomm
virtual platforms.

The hypervisor associates an object-id also known as capability-id
with each smc/hvc doorbell object. The capability-id is used to
identify the doorbell from the VM's capability namespace, similar
to a file-descriptor.

The hypervisor, in addition to the function-id, expects the capability-id
to be passed in x1 register when SMC/HVC call is invoked.

The capability-id is allocated by the hypervisor on bootup and is stored in
the shmem region by the firmware before starting Linux.

Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/firmware/arm_scmi/driver.c |  1 +
 drivers/firmware/arm_scmi/smc.c    | 27 +++++++++++++++++++++++++--
 2 files changed, 26 insertions(+), 2 deletions(-)

Comments

Sudeep Holla Oct. 10, 2023, 10:42 a.m. UTC | #1
On Mon, Oct 09, 2023 at 12:14:37PM -0700, Nikunj Kela wrote:
> This change adds the support for SCMI message exchange on Qualcomm
> virtual platforms.
> 
> The hypervisor associates an object-id also known as capability-id
> with each smc/hvc doorbell object. The capability-id is used to
> identify the doorbell from the VM's capability namespace, similar
> to a file-descriptor.
> 
> The hypervisor, in addition to the function-id, expects the capability-id
> to be passed in x1 register when SMC/HVC call is invoked.
> 
> The capability-id is allocated by the hypervisor on bootup and is stored in
> the shmem region by the firmware before starting Linux.
> 
> Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
> Reviewed-by: Brian Masney <bmasney@redhat.com>
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

FYI for the next time. When posting on the list, the senders sign-off must
be the last. The only reason I signed off is because it is needed as part
of committer in the git repo. You should have ideally dropped it in this case.
If there was some other author/co-developer of the patch, then your signoff
will be always at the end as you are sending the patch.

Refer "Sign your work - the Developer's Certificate of Origin" section
in Documentation/process/submitting-patches.rst

> ---
>  drivers/firmware/arm_scmi/driver.c |  1 +
>  drivers/firmware/arm_scmi/smc.c    | 27 +++++++++++++++++++++++++--
>  2 files changed, 26 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
> index 87383c05424b..09371f40d61f 100644
> --- a/drivers/firmware/arm_scmi/driver.c
> +++ b/drivers/firmware/arm_scmi/driver.c
> @@ -2915,6 +2915,7 @@ static const struct of_device_id scmi_of_match[] = {
>  #ifdef CONFIG_ARM_SCMI_TRANSPORT_SMC
>  	{ .compatible = "arm,scmi-smc", .data = &scmi_smc_desc},
>  	{ .compatible = "arm,scmi-smc-param", .data = &scmi_smc_desc},
> +	{ .compatible = "qcom,scmi-smc", .data = &scmi_smc_desc},
>  #endif
>  #ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO
>  	{ .compatible = "arm,scmi-virtio", .data = &scmi_virtio_desc},
> diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/smc.c
> index 8eba60a41975..7611e9665038 100644
> --- a/drivers/firmware/arm_scmi/smc.c
> +++ b/drivers/firmware/arm_scmi/smc.c
> @@ -15,6 +15,7 @@
>  #include <linux/of.h>
>  #include <linux/of_address.h>
>  #include <linux/of_irq.h>
> +#include <linux/limits.h>
>  #include <linux/processor.h>
>  #include <linux/slab.h>
>  
> @@ -50,6 +51,8 @@
>   * @func_id: smc/hvc call function id
>   * @param_page: 4K page number of the shmem channel
>   * @param_offset: Offset within the 4K page of the shmem channel
> + * @cap_id: smc/hvc doorbell's capability id to be used on Qualcomm virtual
> + *	    platforms
>   */
>  
>  struct scmi_smc {
> @@ -63,6 +66,7 @@ struct scmi_smc {
>  	unsigned long func_id;
>  	unsigned long param_page;
>  	unsigned long param_offset;
> +	unsigned long cap_id;
>  };
>  
>  static irqreturn_t smc_msg_done_isr(int irq, void *data)
> @@ -124,6 +128,7 @@ static int smc_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
>  			  bool tx)
>  {
>  	struct device *cdev = cinfo->dev;
> +	unsigned long cap_id = ULONG_MAX;
>  	struct scmi_smc *scmi_info;
>  	resource_size_t size;
>  	struct resource res;
> @@ -162,6 +167,18 @@ static int smc_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
>  	if (ret < 0)
>  		return ret;
>  
> +	if (of_device_is_compatible(dev->of_node, "qcom,scmi-smc")) {
> +		void __iomem *ptr = (void __iomem *)scmi_info->shmem + size - 8;
> +		/* The capability-id is kept in last 8 bytes of shmem.
> +		 *     +-------+ <-- 0
> +		 *     | shmem |
> +		 *     +-------+ <-- size - 8
> +		 *     | capId |
> +		 *     +-------+ <-- size
> +		 */
> +		memcpy_fromio(&cap_id, ptr, sizeof(cap_id));
> +	}
> +
>  	if (of_device_is_compatible(dev->of_node, "arm,scmi-smc-param")) {
>  		scmi_info->param_page = SHMEM_PAGE(res.start);
>  		scmi_info->param_offset = SHMEM_OFFSET(res.start);
> @@ -184,6 +201,7 @@ static int smc_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
>  	}
>  
>  	scmi_info->func_id = func_id;
> +	scmi_info->cap_id = cap_id;
>  	scmi_info->cinfo = cinfo;
>  	smc_channel_lock_init(scmi_info);
>  	cinfo->transport_info = scmi_info;
> @@ -220,8 +238,13 @@ static int smc_send_message(struct scmi_chan_info *cinfo,
>  
>  	shmem_tx_prepare(scmi_info->shmem, xfer, cinfo);
>  
> -	arm_smccc_1_1_invoke(scmi_info->func_id, scmi_info->param_page,
> -			     scmi_info->param_offset, 0, 0, 0, 0, 0, &res);
> +	if (scmi_info->cap_id != ULONG_MAX)
> +		arm_smccc_1_1_invoke(scmi_info->func_id, scmi_info->cap_id, 0,
> +				     0, 0, 0, 0, 0, &res);
> +	else
> +		arm_smccc_1_1_invoke(scmi_info->func_id, scmi_info->param_page,
> +				     scmi_info->param_offset, 0, 0, 0, 0, 0,
> +				     &res);
>  
>  	/* Only SMCCC_RET_NOT_SUPPORTED is valid error code */
>  	if (res.a0) {
> -- 
> 2.17.1
>
diff mbox series

Patch

diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 87383c05424b..09371f40d61f 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -2915,6 +2915,7 @@  static const struct of_device_id scmi_of_match[] = {
 #ifdef CONFIG_ARM_SCMI_TRANSPORT_SMC
 	{ .compatible = "arm,scmi-smc", .data = &scmi_smc_desc},
 	{ .compatible = "arm,scmi-smc-param", .data = &scmi_smc_desc},
+	{ .compatible = "qcom,scmi-smc", .data = &scmi_smc_desc},
 #endif
 #ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO
 	{ .compatible = "arm,scmi-virtio", .data = &scmi_virtio_desc},
diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/smc.c
index 8eba60a41975..7611e9665038 100644
--- a/drivers/firmware/arm_scmi/smc.c
+++ b/drivers/firmware/arm_scmi/smc.c
@@ -15,6 +15,7 @@ 
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/limits.h>
 #include <linux/processor.h>
 #include <linux/slab.h>
 
@@ -50,6 +51,8 @@ 
  * @func_id: smc/hvc call function id
  * @param_page: 4K page number of the shmem channel
  * @param_offset: Offset within the 4K page of the shmem channel
+ * @cap_id: smc/hvc doorbell's capability id to be used on Qualcomm virtual
+ *	    platforms
  */
 
 struct scmi_smc {
@@ -63,6 +66,7 @@  struct scmi_smc {
 	unsigned long func_id;
 	unsigned long param_page;
 	unsigned long param_offset;
+	unsigned long cap_id;
 };
 
 static irqreturn_t smc_msg_done_isr(int irq, void *data)
@@ -124,6 +128,7 @@  static int smc_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
 			  bool tx)
 {
 	struct device *cdev = cinfo->dev;
+	unsigned long cap_id = ULONG_MAX;
 	struct scmi_smc *scmi_info;
 	resource_size_t size;
 	struct resource res;
@@ -162,6 +167,18 @@  static int smc_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
 	if (ret < 0)
 		return ret;
 
+	if (of_device_is_compatible(dev->of_node, "qcom,scmi-smc")) {
+		void __iomem *ptr = (void __iomem *)scmi_info->shmem + size - 8;
+		/* The capability-id is kept in last 8 bytes of shmem.
+		 *     +-------+ <-- 0
+		 *     | shmem |
+		 *     +-------+ <-- size - 8
+		 *     | capId |
+		 *     +-------+ <-- size
+		 */
+		memcpy_fromio(&cap_id, ptr, sizeof(cap_id));
+	}
+
 	if (of_device_is_compatible(dev->of_node, "arm,scmi-smc-param")) {
 		scmi_info->param_page = SHMEM_PAGE(res.start);
 		scmi_info->param_offset = SHMEM_OFFSET(res.start);
@@ -184,6 +201,7 @@  static int smc_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
 	}
 
 	scmi_info->func_id = func_id;
+	scmi_info->cap_id = cap_id;
 	scmi_info->cinfo = cinfo;
 	smc_channel_lock_init(scmi_info);
 	cinfo->transport_info = scmi_info;
@@ -220,8 +238,13 @@  static int smc_send_message(struct scmi_chan_info *cinfo,
 
 	shmem_tx_prepare(scmi_info->shmem, xfer, cinfo);
 
-	arm_smccc_1_1_invoke(scmi_info->func_id, scmi_info->param_page,
-			     scmi_info->param_offset, 0, 0, 0, 0, 0, &res);
+	if (scmi_info->cap_id != ULONG_MAX)
+		arm_smccc_1_1_invoke(scmi_info->func_id, scmi_info->cap_id, 0,
+				     0, 0, 0, 0, 0, &res);
+	else
+		arm_smccc_1_1_invoke(scmi_info->func_id, scmi_info->param_page,
+				     scmi_info->param_offset, 0, 0, 0, 0, 0,
+				     &res);
 
 	/* Only SMCCC_RET_NOT_SUPPORTED is valid error code */
 	if (res.a0) {