diff mbox series

[v3,5/6] cpufreq/cppc: set the frequency used for computing the capacity

Message ID 20231018162540.667646-6-vincent.guittot@linaro.org (mailing list archive)
State New, archived
Headers show
Series consolidate and cleanup CPU capacity | expand

Commit Message

Vincent Guittot Oct. 18, 2023, 4:25 p.m. UTC 
Save the frequency associated to the performance that has been used when
initializing the capacity of CPUs.
Also, cppc cpufreq driver can register an artificial energy model. In such
case, it needs the frequency for this compute capacity.
We moved and renamed cppc_perf_to_khz and cppc_perf_to_khz to use them
outside cppc_cpufreq in topology_init_cpu_capacity_cppc().

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
---
 drivers/acpi/cppc_acpi.c       |  93 ++++++++++++++++++++++
 drivers/base/arch_topology.c   |  15 +++-
 drivers/cpufreq/cppc_cpufreq.c | 141 ++++++---------------------------
 include/acpi/cppc_acpi.h       |   2 +
 4 files changed, 133 insertions(+), 118 deletions(-)

Comments

Rafael J. Wysocki Oct. 18, 2023, 5:26 p.m. UTC | #1 
On Wed, Oct 18, 2023 at 6:25 PM Vincent Guittot
<vincent.guittot@linaro.org> wrote:
>
> Save the frequency associated to the performance that has been used when
> initializing the capacity of CPUs.
> Also, cppc cpufreq driver can register an artificial energy model. In such
> case, it needs the frequency for this compute capacity.
> We moved and renamed cppc_perf_to_khz and cppc_perf_to_khz to use them
> outside cppc_cpufreq in topology_init_cpu_capacity_cppc().
>
> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>

For the changes in drivers/acpi/cppc_acpi.c :

Acked-by: Rafael J. Wysocki <rafael@kernel.org>

> ---
>  drivers/acpi/cppc_acpi.c       |  93 ++++++++++++++++++++++
>  drivers/base/arch_topology.c   |  15 +++-
>  drivers/cpufreq/cppc_cpufreq.c | 141 ++++++---------------------------
>  include/acpi/cppc_acpi.h       |   2 +
>  4 files changed, 133 insertions(+), 118 deletions(-)
>
> diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
> index 7ff269a78c20..72aae5e87788 100644
> --- a/drivers/acpi/cppc_acpi.c
> +++ b/drivers/acpi/cppc_acpi.c
> @@ -39,6 +39,8 @@
>  #include <linux/rwsem.h>
>  #include <linux/wait.h>
>  #include <linux/topology.h>
> +#include <linux/dmi.h>
> +#include <asm/unaligned.h>
>
>  #include <acpi/cppc_acpi.h>
>
> @@ -1760,3 +1762,94 @@ unsigned int cppc_get_transition_latency(int cpu_num)
>         return latency_ns;
>  }
>  EXPORT_SYMBOL_GPL(cppc_get_transition_latency);
> +
> +/* Minimum struct length needed for the DMI processor entry we want */
> +#define DMI_ENTRY_PROCESSOR_MIN_LENGTH 48
> +
> +/* Offset in the DMI processor structure for the max frequency */
> +#define DMI_PROCESSOR_MAX_SPEED                0x14
> +
> +/* Callback function used to retrieve the max frequency from DMI */
> +static void cppc_find_dmi_mhz(const struct dmi_header *dm, void *private)
> +{
> +       const u8 *dmi_data = (const u8 *)dm;
> +       u16 *mhz = (u16 *)private;
> +
> +       if (dm->type == DMI_ENTRY_PROCESSOR &&
> +           dm->length >= DMI_ENTRY_PROCESSOR_MIN_LENGTH) {
> +               u16 val = (u16)get_unaligned((const u16 *)
> +                               (dmi_data + DMI_PROCESSOR_MAX_SPEED));
> +               *mhz = val > *mhz ? val : *mhz;
> +       }
> +}
> +
> +/* Look up the max frequency in DMI */
> +static u64 cppc_get_dmi_max_khz(void)
> +{
> +       u16 mhz = 0;
> +
> +       dmi_walk(cppc_find_dmi_mhz, &mhz);
> +
> +       /*
> +        * Real stupid fallback value, just in case there is no
> +        * actual value set.
> +        */
> +       mhz = mhz ? mhz : 1;
> +
> +       return (1000 * mhz);
> +}
> +
> +/*
> + * If CPPC lowest_freq and nominal_freq registers are exposed then we can
> + * use them to convert perf to freq and vice versa. The conversion is
> + * extrapolated as an affine function passing by the 2 points:
> + *  - (Low perf, Low freq)
> + *  - (Nominal perf, Nominal perf)
> + */
> +unsigned int cppc_perf_to_khz(struct cppc_perf_caps *caps, unsigned int perf)
> +{
> +       s64 retval, offset = 0;
> +       static u64 max_khz;
> +       u64 mul, div;
> +
> +       if (caps->lowest_freq && caps->nominal_freq) {
> +               mul = caps->nominal_freq - caps->lowest_freq;
> +               div = caps->nominal_perf - caps->lowest_perf;
> +               offset = caps->nominal_freq - div64_u64(caps->nominal_perf * mul, div);
> +       } else {
> +               if (!max_khz)
> +                       max_khz = cppc_get_dmi_max_khz();
> +               mul = max_khz;
> +               div = caps->highest_perf;
> +       }
> +
> +       retval = offset + div64_u64(perf * mul, div);
> +       if (retval >= 0)
> +               return retval;
> +       return 0;
> +}
> +EXPORT_SYMBOL_GPL(cppc_perf_to_khz);
> +
> +unsigned int cppc_khz_to_perf(struct cppc_perf_caps *caps, unsigned int freq)
> +{
> +       s64 retval, offset = 0;
> +       static u64 max_khz;
> +       u64  mul, div;
> +
> +       if (caps->lowest_freq && caps->nominal_freq) {
> +               mul = caps->nominal_perf - caps->lowest_perf;
> +               div = caps->nominal_freq - caps->lowest_freq;
> +               offset = caps->nominal_perf - div64_u64(caps->nominal_freq * mul, div);
> +       } else {
> +               if (!max_khz)
> +                       max_khz = cppc_get_dmi_max_khz();
> +               mul = caps->highest_perf;
> +               div = max_khz;
> +       }
> +
> +       retval = offset + div64_u64(freq * mul, div);
> +       if (retval >= 0)
> +               return retval;
> +       return 0;
> +}
> +EXPORT_SYMBOL_GPL(cppc_khz_to_perf);
> diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c
> index 9a073c2d2086..2372ce791bb4 100644
> --- a/drivers/base/arch_topology.c
> +++ b/drivers/base/arch_topology.c
> @@ -350,6 +350,7 @@ bool __init topology_parse_cpu_capacity(struct device_node *cpu_node, int cpu)
>  void topology_init_cpu_capacity_cppc(void)
>  {
>         struct cppc_perf_caps perf_caps;
> +       u64 capacity, capacity_scale;
>         int cpu;
>
>         if (likely(!acpi_cpc_valid()))
> @@ -365,6 +366,10 @@ void topology_init_cpu_capacity_cppc(void)
>                     (perf_caps.highest_perf >= perf_caps.nominal_perf) &&
>                     (perf_caps.highest_perf >= perf_caps.lowest_perf)) {
>                         raw_capacity[cpu] = perf_caps.highest_perf;
> +                       capacity_scale = max_t(u64, capacity_scale, raw_capacity[cpu]);
> +
> +                       per_cpu(capacity_ref_freq, cpu) = cppc_perf_to_khz(&perf_caps, raw_capacity[cpu]);
> +
>                         pr_debug("cpu_capacity: CPU%d cpu_capacity=%u (raw).\n",
>                                  cpu, raw_capacity[cpu]);
>                         continue;
> @@ -375,7 +380,15 @@ void topology_init_cpu_capacity_cppc(void)
>                 goto exit;
>         }
>
> -       topology_normalize_cpu_scale();
> +       for_each_possible_cpu(cpu) {
> +               capacity = raw_capacity[cpu];
> +               capacity = div64_u64(capacity << SCHED_CAPACITY_SHIFT,
> +                                    capacity_scale);
> +               topology_set_cpu_scale(cpu, capacity);
> +               pr_debug("cpu_capacity: CPU%d cpu_capacity=%lu\n",
> +                       cpu, topology_get_cpu_scale(cpu));
> +       }
> +
>         schedule_work(&update_topology_flags_work);
>         pr_debug("cpu_capacity: cpu_capacity initialization done\n");
>
> diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
> index fe08ca419b3d..822376b0cb78 100644
> --- a/drivers/cpufreq/cppc_cpufreq.c
> +++ b/drivers/cpufreq/cppc_cpufreq.c
> @@ -27,12 +27,6 @@
>
>  #include <acpi/cppc_acpi.h>
>
> -/* Minimum struct length needed for the DMI processor entry we want */
> -#define DMI_ENTRY_PROCESSOR_MIN_LENGTH 48
> -
> -/* Offset in the DMI processor structure for the max frequency */
> -#define DMI_PROCESSOR_MAX_SPEED                0x14
> -
>  /*
>   * This list contains information parsed from per CPU ACPI _CPC and _PSD
>   * structures: e.g. the highest and lowest supported performance, capabilities,
> @@ -291,97 +285,9 @@ static inline void cppc_freq_invariance_exit(void)
>  }
>  #endif /* CONFIG_ACPI_CPPC_CPUFREQ_FIE */
>
> -/* Callback function used to retrieve the max frequency from DMI */
> -static void cppc_find_dmi_mhz(const struct dmi_header *dm, void *private)
> -{
> -       const u8 *dmi_data = (const u8 *)dm;
> -       u16 *mhz = (u16 *)private;
> -
> -       if (dm->type == DMI_ENTRY_PROCESSOR &&
> -           dm->length >= DMI_ENTRY_PROCESSOR_MIN_LENGTH) {
> -               u16 val = (u16)get_unaligned((const u16 *)
> -                               (dmi_data + DMI_PROCESSOR_MAX_SPEED));
> -               *mhz = val > *mhz ? val : *mhz;
> -       }
> -}
> -
> -/* Look up the max frequency in DMI */
> -static u64 cppc_get_dmi_max_khz(void)
> -{
> -       u16 mhz = 0;
> -
> -       dmi_walk(cppc_find_dmi_mhz, &mhz);
> -
> -       /*
> -        * Real stupid fallback value, just in case there is no
> -        * actual value set.
> -        */
> -       mhz = mhz ? mhz : 1;
> -
> -       return (1000 * mhz);
> -}
> -
> -/*
> - * If CPPC lowest_freq and nominal_freq registers are exposed then we can
> - * use them to convert perf to freq and vice versa. The conversion is
> - * extrapolated as an affine function passing by the 2 points:
> - *  - (Low perf, Low freq)
> - *  - (Nominal perf, Nominal perf)
> - */
> -static unsigned int cppc_cpufreq_perf_to_khz(struct cppc_cpudata *cpu_data,
> -                                            unsigned int perf)
> -{
> -       struct cppc_perf_caps *caps = &cpu_data->perf_caps;
> -       s64 retval, offset = 0;
> -       static u64 max_khz;
> -       u64 mul, div;
> -
> -       if (caps->lowest_freq && caps->nominal_freq) {
> -               mul = caps->nominal_freq - caps->lowest_freq;
> -               div = caps->nominal_perf - caps->lowest_perf;
> -               offset = caps->nominal_freq - div64_u64(caps->nominal_perf * mul, div);
> -       } else {
> -               if (!max_khz)
> -                       max_khz = cppc_get_dmi_max_khz();
> -               mul = max_khz;
> -               div = caps->highest_perf;
> -       }
> -
> -       retval = offset + div64_u64(perf * mul, div);
> -       if (retval >= 0)
> -               return retval;
> -       return 0;
> -}
> -
> -static unsigned int cppc_cpufreq_khz_to_perf(struct cppc_cpudata *cpu_data,
> -                                            unsigned int freq)
> -{
> -       struct cppc_perf_caps *caps = &cpu_data->perf_caps;
> -       s64 retval, offset = 0;
> -       static u64 max_khz;
> -       u64  mul, div;
> -
> -       if (caps->lowest_freq && caps->nominal_freq) {
> -               mul = caps->nominal_perf - caps->lowest_perf;
> -               div = caps->nominal_freq - caps->lowest_freq;
> -               offset = caps->nominal_perf - div64_u64(caps->nominal_freq * mul, div);
> -       } else {
> -               if (!max_khz)
> -                       max_khz = cppc_get_dmi_max_khz();
> -               mul = caps->highest_perf;
> -               div = max_khz;
> -       }
> -
> -       retval = offset + div64_u64(freq * mul, div);
> -       if (retval >= 0)
> -               return retval;
> -       return 0;
> -}
> -
>  static int cppc_cpufreq_set_target(struct cpufreq_policy *policy,
>                                    unsigned int target_freq,
>                                    unsigned int relation)
> -
>  {
>         struct cppc_cpudata *cpu_data = policy->driver_data;
>         unsigned int cpu = policy->cpu;
> @@ -389,7 +295,7 @@ static int cppc_cpufreq_set_target(struct cpufreq_policy *policy,
>         u32 desired_perf;
>         int ret = 0;
>
> -       desired_perf = cppc_cpufreq_khz_to_perf(cpu_data, target_freq);
> +       desired_perf = cppc_khz_to_perf(&cpu_data->perf_caps, target_freq);
>         /* Return if it is exactly the same perf */
>         if (desired_perf == cpu_data->perf_ctrls.desired_perf)
>                 return ret;
> @@ -417,7 +323,7 @@ static unsigned int cppc_cpufreq_fast_switch(struct cpufreq_policy *policy,
>         u32 desired_perf;
>         int ret;
>
> -       desired_perf = cppc_cpufreq_khz_to_perf(cpu_data, target_freq);
> +       desired_perf = cppc_khz_to_perf(&cpu_data->perf_caps, target_freq);
>         cpu_data->perf_ctrls.desired_perf = desired_perf;
>         ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls);
>
> @@ -530,7 +436,7 @@ static int cppc_get_cpu_power(struct device *cpu_dev,
>         min_step = min_cap / CPPC_EM_CAP_STEP;
>         max_step = max_cap / CPPC_EM_CAP_STEP;
>
> -       perf_prev = cppc_cpufreq_khz_to_perf(cpu_data, *KHz);
> +       perf_prev = cppc_khz_to_perf(perf_caps, *KHz);
>         step = perf_prev / perf_step;
>
>         if (step > max_step)
> @@ -550,8 +456,8 @@ static int cppc_get_cpu_power(struct device *cpu_dev,
>                         perf = step * perf_step;
>         }
>
> -       *KHz = cppc_cpufreq_perf_to_khz(cpu_data, perf);
> -       perf_check = cppc_cpufreq_khz_to_perf(cpu_data, *KHz);
> +       *KHz = cppc_perf_to_khz(perf_caps, perf);
> +       perf_check = cppc_khz_to_perf(perf_caps, *KHz);
>         step_check = perf_check / perf_step;
>
>         /*
> @@ -561,8 +467,8 @@ static int cppc_get_cpu_power(struct device *cpu_dev,
>          */
>         while ((*KHz == prev_freq) || (step_check != step)) {
>                 perf++;
> -               *KHz = cppc_cpufreq_perf_to_khz(cpu_data, perf);
> -               perf_check = cppc_cpufreq_khz_to_perf(cpu_data, *KHz);
> +               *KHz = cppc_perf_to_khz(perf_caps, perf);
> +               perf_check = cppc_khz_to_perf(perf_caps, *KHz);
>                 step_check = perf_check / perf_step;
>         }
>
> @@ -591,7 +497,7 @@ static int cppc_get_cpu_cost(struct device *cpu_dev, unsigned long KHz,
>         perf_caps = &cpu_data->perf_caps;
>         max_cap = arch_scale_cpu_capacity(cpu_dev->id);
>
> -       perf_prev = cppc_cpufreq_khz_to_perf(cpu_data, KHz);
> +       perf_prev = cppc_khz_to_perf(perf_caps, KHz);
>         perf_step = CPPC_EM_CAP_STEP * perf_caps->highest_perf / max_cap;
>         step = perf_prev / perf_step;
>
> @@ -643,6 +549,7 @@ static void cppc_cpufreq_register_em(struct cpufreq_policy *policy)
>                 EM_ADV_DATA_CB(cppc_get_cpu_power, cppc_get_cpu_cost);
>
>         cpu_data = policy->driver_data;
> +
>         em_dev_register_perf_domain(get_cpu_device(policy->cpu),
>                         get_perf_level_count(policy), &em_cb,
>                         cpu_data->shared_cpu_map, 0);
> @@ -724,20 +631,20 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
>          * Set min to lowest nonlinear perf to avoid any efficiency penalty (see
>          * Section 8.4.7.1.1.5 of ACPI 6.1 spec)
>          */
> -       policy->min = cppc_cpufreq_perf_to_khz(cpu_data,
> -                                              caps->lowest_nonlinear_perf);
> -       policy->max = cppc_cpufreq_perf_to_khz(cpu_data,
> -                                              caps->nominal_perf);
> +       policy->min = cppc_perf_to_khz(caps,
> +                                      caps->lowest_nonlinear_perf);
> +       policy->max = cppc_perf_to_khz(caps,
> +                                      caps->nominal_perf);
>
>         /*
>          * Set cpuinfo.min_freq to Lowest to make the full range of performance
>          * available if userspace wants to use any perf between lowest & lowest
>          * nonlinear perf
>          */
> -       policy->cpuinfo.min_freq = cppc_cpufreq_perf_to_khz(cpu_data,
> -                                                           caps->lowest_perf);
> -       policy->cpuinfo.max_freq = cppc_cpufreq_perf_to_khz(cpu_data,
> -                                                           caps->nominal_perf);
> +       policy->cpuinfo.min_freq = cppc_perf_to_khz(caps,
> +                                                   caps->lowest_perf);
> +       policy->cpuinfo.max_freq = cppc_perf_to_khz(caps,
> +                                                   caps->nominal_perf);
>
>         policy->transition_delay_us = cppc_cpufreq_get_transition_delay_us(cpu);
>         policy->shared_type = cpu_data->shared_type;
> @@ -773,7 +680,7 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
>                 boost_supported = true;
>
>         /* Set policy->cur to max now. The governors will adjust later. */
> -       policy->cur = cppc_cpufreq_perf_to_khz(cpu_data, caps->highest_perf);
> +       policy->cur = cppc_perf_to_khz(caps, caps->highest_perf);
>         cpu_data->perf_ctrls.desired_perf =  caps->highest_perf;
>
>         ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls);
> @@ -863,7 +770,7 @@ static unsigned int cppc_cpufreq_get_rate(unsigned int cpu)
>         delivered_perf = cppc_perf_from_fbctrs(cpu_data, &fb_ctrs_t0,
>                                                &fb_ctrs_t1);
>
> -       return cppc_cpufreq_perf_to_khz(cpu_data, delivered_perf);
> +       return cppc_perf_to_khz(&cpu_data->perf_caps, delivered_perf);
>  }
>
>  static int cppc_cpufreq_set_boost(struct cpufreq_policy *policy, int state)
> @@ -878,11 +785,11 @@ static int cppc_cpufreq_set_boost(struct cpufreq_policy *policy, int state)
>         }
>
>         if (state)
> -               policy->max = cppc_cpufreq_perf_to_khz(cpu_data,
> -                                                      caps->highest_perf);
> +               policy->max = cppc_perf_to_khz(caps,
> +                                              caps->highest_perf);
>         else
> -               policy->max = cppc_cpufreq_perf_to_khz(cpu_data,
> -                                                      caps->nominal_perf);
> +               policy->max = cppc_perf_to_khz(caps,
> +                                              caps->nominal_perf);
>         policy->cpuinfo.max_freq = policy->max;
>
>         ret = freq_qos_update_request(policy->max_freq_req, policy->max);
> @@ -937,7 +844,7 @@ static unsigned int hisi_cppc_cpufreq_get_rate(unsigned int cpu)
>         if (ret < 0)
>                 return -EIO;
>
> -       return cppc_cpufreq_perf_to_khz(cpu_data, desired_perf);
> +       return cppc_perf_to_khz(&cpu_data->perf_caps, desired_perf);
>  }
>
>  static void cppc_check_hisi_workaround(void)
> diff --git a/include/acpi/cppc_acpi.h b/include/acpi/cppc_acpi.h
> index 6126c977ece0..3a0995f8bce8 100644
> --- a/include/acpi/cppc_acpi.h
> +++ b/include/acpi/cppc_acpi.h
> @@ -144,6 +144,8 @@ extern int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls);
>  extern int cppc_set_enable(int cpu, bool enable);
>  extern int cppc_get_perf_caps(int cpu, struct cppc_perf_caps *caps);
>  extern bool cppc_perf_ctrs_in_pcc(void);
> +extern unsigned int cppc_perf_to_khz(struct cppc_perf_caps *caps, unsigned int perf);
> +extern unsigned int cppc_khz_to_perf(struct cppc_perf_caps *caps, unsigned int freq);
>  extern bool acpi_cpc_valid(void);
>  extern bool cppc_allow_fast_switch(void);
>  extern int acpi_get_psd_map(unsigned int cpu, struct cppc_cpudata *cpu_data);
> --
> 2.34.1
>
Pierre Gondois Oct. 20, 2023, 4:05 p.m. UTC | #2 
Hello Vincent,

On 10/18/23 19:26, Rafael J. Wysocki wrote:
> On Wed, Oct 18, 2023 at 6:25 PM Vincent Guittot
> <vincent.guittot@linaro.org> wrote:
>>
>> Save the frequency associated to the performance that has been used when
>> initializing the capacity of CPUs.
>> Also, cppc cpufreq driver can register an artificial energy model. In such
>> case, it needs the frequency for this compute capacity.
>> We moved and renamed cppc_perf_to_khz and cppc_perf_to_khz to use them
>> outside cppc_cpufreq in topology_init_cpu_capacity_cppc().
>>
>> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
> 
> For the changes in drivers/acpi/cppc_acpi.c :
> 
> Acked-by: Rafael J. Wysocki <rafael@kernel.org>
> 
>> ---
>>   drivers/acpi/cppc_acpi.c       |  93 ++++++++++++++++++++++
>>   drivers/base/arch_topology.c   |  15 +++-
>>   drivers/cpufreq/cppc_cpufreq.c | 141 ++++++---------------------------
>>   include/acpi/cppc_acpi.h       |   2 +
>>   4 files changed, 133 insertions(+), 118 deletions(-)
>>

[snip]

>> diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c
>> index 9a073c2d2086..2372ce791bb4 100644
>> --- a/drivers/base/arch_topology.c
>> +++ b/drivers/base/arch_topology.c
>> @@ -350,6 +350,7 @@ bool __init topology_parse_cpu_capacity(struct device_node *cpu_node, int cpu)
>>   void topology_init_cpu_capacity_cppc(void)
>>   {
>>          struct cppc_perf_caps perf_caps;
>> +       u64 capacity, capacity_scale;

I think capacity_scale should be initialized to 0 here,
since it is used to find the max value of raw_capacity[cpu].

>>          int cpu;
>>
>>          if (likely(!acpi_cpc_valid()))
>> @@ -365,6 +366,10 @@ void topology_init_cpu_capacity_cppc(void)
>>                      (perf_caps.highest_perf >= perf_caps.nominal_perf) &&
>>                      (perf_caps.highest_perf >= perf_caps.lowest_perf)) {
>>                          raw_capacity[cpu] = perf_caps.highest_perf;
>> +                       capacity_scale = max_t(u64, capacity_scale, raw_capacity[cpu]);
>> +
>> +                       per_cpu(capacity_ref_freq, cpu) = cppc_perf_to_khz(&perf_caps, raw_capacity[cpu]);

I think capacity_ref_freq in in Hz, so the freq should be multiplied by 1000 .

With these two modifications, the patches worked well on a cppc-based platform.

Sorry I forgot to detail what it was. It's a modified Juno with CPPC enabled. AMUs are not
enabled, so the CPPC performance counters are not handled correctly and FIE cannot be enabled,
but it is possible to change frequencies.

The _CPC objects are setup as:
little CPUs:
- lowest_freq = 450 (MHz)
- nominal_freq = 800 (MHz)
- highest_perf = 383 * 1000
- nominal_perf = 322 * 1000
- lowest_perf = 181 * 1000
- lowest_nonlinear_perf = 181 * 1000

big CPUs:
- lowest_freq = 600 (MHz)
- nominal_freq = 1200 (MHz)
- highest_perf = 1024 * 1000
- nominal_perf = 833 * 1000
- lowest_perf = 512 * 1000
- lowest_nonlinear_perf = 512 * 1000

As a remainder, available frequencies are:
- little CPUs: 450, 800, 950 MHz
- big CPUs: 600, 1000, 1200 Mhz
So the platform is setup to have the last frequency as a boost frequency (for testing).

----

Just to make a note of 2 potential side-issues for later (independent from these patches):

- When testing with boosted/non-bossted frequencies, it didn't seem that cpu_overutilized()
   was taking the maximum frequency into consideration. This might mean that when lowering the
   maximum frequency of a policy, the maximum capacity of the CPUs of this policy is used
   to detect over-utilization.
   I would have thought that the over-utilization threshold would be lowered at the same time.

- Similarly for EAS, the energy computation doesn't take into account the maximum frequency
   of the policy. This should mean that EAS is taking into consideration frequencies that
   are not actually available.


Regards,
Pierre
Vincent Guittot Oct. 24, 2023, 9:56 a.m. UTC | #3 
On Fri, 20 Oct 2023 at 18:05, Pierre Gondois <pierre.gondois@arm.com> wrote:
>
> Hello Vincent,
>
> On 10/18/23 19:26, Rafael J. Wysocki wrote:
> > On Wed, Oct 18, 2023 at 6:25 PM Vincent Guittot
> > <vincent.guittot@linaro.org> wrote:
> >>
> >> Save the frequency associated to the performance that has been used when
> >> initializing the capacity of CPUs.
> >> Also, cppc cpufreq driver can register an artificial energy model. In such
> >> case, it needs the frequency for this compute capacity.
> >> We moved and renamed cppc_perf_to_khz and cppc_perf_to_khz to use them
> >> outside cppc_cpufreq in topology_init_cpu_capacity_cppc().
> >>
> >> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
> >
> > For the changes in drivers/acpi/cppc_acpi.c :
> >
> > Acked-by: Rafael J. Wysocki <rafael@kernel.org>
> >
> >> ---
> >>   drivers/acpi/cppc_acpi.c       |  93 ++++++++++++++++++++++
> >>   drivers/base/arch_topology.c   |  15 +++-
> >>   drivers/cpufreq/cppc_cpufreq.c | 141 ++++++---------------------------
> >>   include/acpi/cppc_acpi.h       |   2 +
> >>   4 files changed, 133 insertions(+), 118 deletions(-)
> >>
>
> [snip]
>
> >> diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c
> >> index 9a073c2d2086..2372ce791bb4 100644
> >> --- a/drivers/base/arch_topology.c
> >> +++ b/drivers/base/arch_topology.c
> >> @@ -350,6 +350,7 @@ bool __init topology_parse_cpu_capacity(struct device_node *cpu_node, int cpu)
> >>   void topology_init_cpu_capacity_cppc(void)
> >>   {
> >>          struct cppc_perf_caps perf_caps;
> >> +       u64 capacity, capacity_scale;
>
> I think capacity_scale should be initialized to 0 here,
> since it is used to find the max value of raw_capacity[cpu].

yes

>
> >>          int cpu;
> >>
> >>          if (likely(!acpi_cpc_valid()))
> >> @@ -365,6 +366,10 @@ void topology_init_cpu_capacity_cppc(void)
> >>                      (perf_caps.highest_perf >= perf_caps.nominal_perf) &&
> >>                      (perf_caps.highest_perf >= perf_caps.lowest_perf)) {
> >>                          raw_capacity[cpu] = perf_caps.highest_perf;
> >> +                       capacity_scale = max_t(u64, capacity_scale, raw_capacity[cpu]);
> >> +
> >> +                       per_cpu(capacity_ref_freq, cpu) = cppc_perf_to_khz(&perf_caps, raw_capacity[cpu]);
>
> I think capacity_ref_freq in in Hz, so the freq should be multiplied by 1000 .

yes, I forgot the *1000. I'm going to add * HZ_PER_KHZ

>
> With these two modifications, the patches worked well on a cppc-based platform.
>
> Sorry I forgot to detail what it was. It's a modified Juno with CPPC enabled. AMUs are not
> enabled, so the CPPC performance counters are not handled correctly and FIE cannot be enabled,
> but it is possible to change frequencies.
>
> The _CPC objects are setup as:
> little CPUs:
> - lowest_freq = 450 (MHz)
> - nominal_freq = 800 (MHz)
> - highest_perf = 383 * 1000
> - nominal_perf = 322 * 1000
> - lowest_perf = 181 * 1000
> - lowest_nonlinear_perf = 181 * 1000
>
> big CPUs:
> - lowest_freq = 600 (MHz)
> - nominal_freq = 1200 (MHz)
> - highest_perf = 1024 * 1000
> - nominal_perf = 833 * 1000
> - lowest_perf = 512 * 1000
> - lowest_nonlinear_perf = 512 * 1000
>
> As a remainder, available frequencies are:
> - little CPUs: 450, 800, 950 MHz
> - big CPUs: 600, 1000, 1200 Mhz
> So the platform is setup to have the last frequency as a boost frequency (for testing).
>
> ----
>
> Just to make a note of 2 potential side-issues for later (independent from these patches):
>
> - When testing with boosted/non-bossted frequencies, it didn't seem that cpu_overutilized()
>    was taking the maximum frequency into consideration. This might mean that when lowering the
>    maximum frequency of a policy, the maximum capacity of the CPUs of this policy is used
>    to detect over-utilization.
>    I would have thought that the over-utilization threshold would be lowered at the same time.

No it's not, It will be part of a next step patchset. This patchset
aims to consolidate and use the same reference so we can then easily
propagate changes if needed

>
> - Similarly for EAS, the energy computation doesn't take into account the maximum frequency
>    of the policy. This should mean that EAS is taking into consideration frequencies that
>    are not actually available.
>
>
> Regards,
> Pierre
Peter Zijlstra Oct. 25, 2023, 12:24 p.m. UTC | #4 
On Wed, Oct 18, 2023 at 06:25:39PM +0200, Vincent Guittot wrote:
> Save the frequency associated to the performance that has been used when
> initializing the capacity of CPUs.
> Also, cppc cpufreq driver can register an artificial energy model. In such
> case, it needs the frequency for this compute capacity.
> We moved and renamed cppc_perf_to_khz and cppc_perf_to_khz to use them

perf_to_khz and khz_to_perf presumably :-)

> outside cppc_cpufreq in topology_init_cpu_capacity_cppc().
Peter Zijlstra Oct. 25, 2023, 12:51 p.m. UTC | #5 
On Wed, Oct 18, 2023 at 06:25:39PM +0200, Vincent Guittot wrote:
> Save the frequency associated to the performance that has been used when
> initializing the capacity of CPUs.
> Also, cppc cpufreq driver can register an artificial energy model. In such
> case, it needs the frequency for this compute capacity.
> We moved and renamed cppc_perf_to_khz and cppc_perf_to_khz to use them
> outside cppc_cpufreq in topology_init_cpu_capacity_cppc().
> 
> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
> ---
>  drivers/acpi/cppc_acpi.c       |  93 ++++++++++++++++++++++
>  drivers/base/arch_topology.c   |  15 +++-
>  drivers/cpufreq/cppc_cpufreq.c | 141 ++++++---------------------------
>  include/acpi/cppc_acpi.h       |   2 +
>  4 files changed, 133 insertions(+), 118 deletions(-)

Perhaps split this patch into code movement and actual change for ease
of review? As in, I'm having trouble finding the actual changes ;-)
Vincent Guittot Oct. 25, 2023, 12:58 p.m. UTC | #6 
On Wed, 25 Oct 2023 at 14:52, Peter Zijlstra <peterz@infradead.org> wrote:
>
> On Wed, Oct 18, 2023 at 06:25:39PM +0200, Vincent Guittot wrote:
> > Save the frequency associated to the performance that has been used when
> > initializing the capacity of CPUs.
> > Also, cppc cpufreq driver can register an artificial energy model. In such
> > case, it needs the frequency for this compute capacity.
> > We moved and renamed cppc_perf_to_khz and cppc_perf_to_khz to use them
> > outside cppc_cpufreq in topology_init_cpu_capacity_cppc().
> >
> > Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
> > ---
> >  drivers/acpi/cppc_acpi.c       |  93 ++++++++++++++++++++++
> >  drivers/base/arch_topology.c   |  15 +++-
> >  drivers/cpufreq/cppc_cpufreq.c | 141 ++++++---------------------------
> >  include/acpi/cppc_acpi.h       |   2 +
> >  4 files changed, 133 insertions(+), 118 deletions(-)
>
> Perhaps split this patch into code movement and actual change for ease
> of review? As in, I'm having trouble finding the actual changes ;-)

yes, I can split it.

The actual change is located in drivers/base/arch_topology.c

>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
diff mbox series

Patch

diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index 7ff269a78c20..72aae5e87788 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -39,6 +39,8 @@ 
 #include <linux/rwsem.h>
 #include <linux/wait.h>
 #include <linux/topology.h>
+#include <linux/dmi.h>
+#include <asm/unaligned.h>
 
 #include <acpi/cppc_acpi.h>
 
@@ -1760,3 +1762,94 @@  unsigned int cppc_get_transition_latency(int cpu_num)
 	return latency_ns;
 }
 EXPORT_SYMBOL_GPL(cppc_get_transition_latency);
+
+/* Minimum struct length needed for the DMI processor entry we want */
+#define DMI_ENTRY_PROCESSOR_MIN_LENGTH	48
+
+/* Offset in the DMI processor structure for the max frequency */
+#define DMI_PROCESSOR_MAX_SPEED		0x14
+
+/* Callback function used to retrieve the max frequency from DMI */
+static void cppc_find_dmi_mhz(const struct dmi_header *dm, void *private)
+{
+	const u8 *dmi_data = (const u8 *)dm;
+	u16 *mhz = (u16 *)private;
+
+	if (dm->type == DMI_ENTRY_PROCESSOR &&
+	    dm->length >= DMI_ENTRY_PROCESSOR_MIN_LENGTH) {
+		u16 val = (u16)get_unaligned((const u16 *)
+				(dmi_data + DMI_PROCESSOR_MAX_SPEED));
+		*mhz = val > *mhz ? val : *mhz;
+	}
+}
+
+/* Look up the max frequency in DMI */
+static u64 cppc_get_dmi_max_khz(void)
+{
+	u16 mhz = 0;
+
+	dmi_walk(cppc_find_dmi_mhz, &mhz);
+
+	/*
+	 * Real stupid fallback value, just in case there is no
+	 * actual value set.
+	 */
+	mhz = mhz ? mhz : 1;
+
+	return (1000 * mhz);
+}
+
+/*
+ * If CPPC lowest_freq and nominal_freq registers are exposed then we can
+ * use them to convert perf to freq and vice versa. The conversion is
+ * extrapolated as an affine function passing by the 2 points:
+ *  - (Low perf, Low freq)
+ *  - (Nominal perf, Nominal perf)
+ */
+unsigned int cppc_perf_to_khz(struct cppc_perf_caps *caps, unsigned int perf)
+{
+	s64 retval, offset = 0;
+	static u64 max_khz;
+	u64 mul, div;
+
+	if (caps->lowest_freq && caps->nominal_freq) {
+		mul = caps->nominal_freq - caps->lowest_freq;
+		div = caps->nominal_perf - caps->lowest_perf;
+		offset = caps->nominal_freq - div64_u64(caps->nominal_perf * mul, div);
+	} else {
+		if (!max_khz)
+			max_khz = cppc_get_dmi_max_khz();
+		mul = max_khz;
+		div = caps->highest_perf;
+	}
+
+	retval = offset + div64_u64(perf * mul, div);
+	if (retval >= 0)
+		return retval;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cppc_perf_to_khz);
+
+unsigned int cppc_khz_to_perf(struct cppc_perf_caps *caps, unsigned int freq)
+{
+	s64 retval, offset = 0;
+	static u64 max_khz;
+	u64  mul, div;
+
+	if (caps->lowest_freq && caps->nominal_freq) {
+		mul = caps->nominal_perf - caps->lowest_perf;
+		div = caps->nominal_freq - caps->lowest_freq;
+		offset = caps->nominal_perf - div64_u64(caps->nominal_freq * mul, div);
+	} else {
+		if (!max_khz)
+			max_khz = cppc_get_dmi_max_khz();
+		mul = caps->highest_perf;
+		div = max_khz;
+	}
+
+	retval = offset + div64_u64(freq * mul, div);
+	if (retval >= 0)
+		return retval;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cppc_khz_to_perf);
diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c
index 9a073c2d2086..2372ce791bb4 100644
--- a/drivers/base/arch_topology.c
+++ b/drivers/base/arch_topology.c
@@ -350,6 +350,7 @@  bool __init topology_parse_cpu_capacity(struct device_node *cpu_node, int cpu)
 void topology_init_cpu_capacity_cppc(void)
 {
 	struct cppc_perf_caps perf_caps;
+	u64 capacity, capacity_scale;
 	int cpu;
 
 	if (likely(!acpi_cpc_valid()))
@@ -365,6 +366,10 @@  void topology_init_cpu_capacity_cppc(void)
 		    (perf_caps.highest_perf >= perf_caps.nominal_perf) &&
 		    (perf_caps.highest_perf >= perf_caps.lowest_perf)) {
 			raw_capacity[cpu] = perf_caps.highest_perf;
+			capacity_scale = max_t(u64, capacity_scale, raw_capacity[cpu]);
+
+			per_cpu(capacity_ref_freq, cpu) = cppc_perf_to_khz(&perf_caps, raw_capacity[cpu]);
+
 			pr_debug("cpu_capacity: CPU%d cpu_capacity=%u (raw).\n",
 				 cpu, raw_capacity[cpu]);
 			continue;
@@ -375,7 +380,15 @@  void topology_init_cpu_capacity_cppc(void)
 		goto exit;
 	}
 
-	topology_normalize_cpu_scale();
+	for_each_possible_cpu(cpu) {
+		capacity = raw_capacity[cpu];
+		capacity = div64_u64(capacity << SCHED_CAPACITY_SHIFT,
+				     capacity_scale);
+		topology_set_cpu_scale(cpu, capacity);
+		pr_debug("cpu_capacity: CPU%d cpu_capacity=%lu\n",
+			cpu, topology_get_cpu_scale(cpu));
+	}
+
 	schedule_work(&update_topology_flags_work);
 	pr_debug("cpu_capacity: cpu_capacity initialization done\n");
 
diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
index fe08ca419b3d..822376b0cb78 100644
--- a/drivers/cpufreq/cppc_cpufreq.c
+++ b/drivers/cpufreq/cppc_cpufreq.c
@@ -27,12 +27,6 @@ 
 
 #include <acpi/cppc_acpi.h>
 
-/* Minimum struct length needed for the DMI processor entry we want */
-#define DMI_ENTRY_PROCESSOR_MIN_LENGTH	48
-
-/* Offset in the DMI processor structure for the max frequency */
-#define DMI_PROCESSOR_MAX_SPEED		0x14
-
 /*
  * This list contains information parsed from per CPU ACPI _CPC and _PSD
  * structures: e.g. the highest and lowest supported performance, capabilities,
@@ -291,97 +285,9 @@  static inline void cppc_freq_invariance_exit(void)
 }
 #endif /* CONFIG_ACPI_CPPC_CPUFREQ_FIE */
 
-/* Callback function used to retrieve the max frequency from DMI */
-static void cppc_find_dmi_mhz(const struct dmi_header *dm, void *private)
-{
-	const u8 *dmi_data = (const u8 *)dm;
-	u16 *mhz = (u16 *)private;
-
-	if (dm->type == DMI_ENTRY_PROCESSOR &&
-	    dm->length >= DMI_ENTRY_PROCESSOR_MIN_LENGTH) {
-		u16 val = (u16)get_unaligned((const u16 *)
-				(dmi_data + DMI_PROCESSOR_MAX_SPEED));
-		*mhz = val > *mhz ? val : *mhz;
-	}
-}
-
-/* Look up the max frequency in DMI */
-static u64 cppc_get_dmi_max_khz(void)
-{
-	u16 mhz = 0;
-
-	dmi_walk(cppc_find_dmi_mhz, &mhz);
-
-	/*
-	 * Real stupid fallback value, just in case there is no
-	 * actual value set.
-	 */
-	mhz = mhz ? mhz : 1;
-
-	return (1000 * mhz);
-}
-
-/*
- * If CPPC lowest_freq and nominal_freq registers are exposed then we can
- * use them to convert perf to freq and vice versa. The conversion is
- * extrapolated as an affine function passing by the 2 points:
- *  - (Low perf, Low freq)
- *  - (Nominal perf, Nominal perf)
- */
-static unsigned int cppc_cpufreq_perf_to_khz(struct cppc_cpudata *cpu_data,
-					     unsigned int perf)
-{
-	struct cppc_perf_caps *caps = &cpu_data->perf_caps;
-	s64 retval, offset = 0;
-	static u64 max_khz;
-	u64 mul, div;
-
-	if (caps->lowest_freq && caps->nominal_freq) {
-		mul = caps->nominal_freq - caps->lowest_freq;
-		div = caps->nominal_perf - caps->lowest_perf;
-		offset = caps->nominal_freq - div64_u64(caps->nominal_perf * mul, div);
-	} else {
-		if (!max_khz)
-			max_khz = cppc_get_dmi_max_khz();
-		mul = max_khz;
-		div = caps->highest_perf;
-	}
-
-	retval = offset + div64_u64(perf * mul, div);
-	if (retval >= 0)
-		return retval;
-	return 0;
-}
-
-static unsigned int cppc_cpufreq_khz_to_perf(struct cppc_cpudata *cpu_data,
-					     unsigned int freq)
-{
-	struct cppc_perf_caps *caps = &cpu_data->perf_caps;
-	s64 retval, offset = 0;
-	static u64 max_khz;
-	u64  mul, div;
-
-	if (caps->lowest_freq && caps->nominal_freq) {
-		mul = caps->nominal_perf - caps->lowest_perf;
-		div = caps->nominal_freq - caps->lowest_freq;
-		offset = caps->nominal_perf - div64_u64(caps->nominal_freq * mul, div);
-	} else {
-		if (!max_khz)
-			max_khz = cppc_get_dmi_max_khz();
-		mul = caps->highest_perf;
-		div = max_khz;
-	}
-
-	retval = offset + div64_u64(freq * mul, div);
-	if (retval >= 0)
-		return retval;
-	return 0;
-}
-
 static int cppc_cpufreq_set_target(struct cpufreq_policy *policy,
 				   unsigned int target_freq,
 				   unsigned int relation)
-
 {
 	struct cppc_cpudata *cpu_data = policy->driver_data;
 	unsigned int cpu = policy->cpu;
@@ -389,7 +295,7 @@  static int cppc_cpufreq_set_target(struct cpufreq_policy *policy,
 	u32 desired_perf;
 	int ret = 0;
 
-	desired_perf = cppc_cpufreq_khz_to_perf(cpu_data, target_freq);
+	desired_perf = cppc_khz_to_perf(&cpu_data->perf_caps, target_freq);
 	/* Return if it is exactly the same perf */
 	if (desired_perf == cpu_data->perf_ctrls.desired_perf)
 		return ret;
@@ -417,7 +323,7 @@  static unsigned int cppc_cpufreq_fast_switch(struct cpufreq_policy *policy,
 	u32 desired_perf;
 	int ret;
 
-	desired_perf = cppc_cpufreq_khz_to_perf(cpu_data, target_freq);
+	desired_perf = cppc_khz_to_perf(&cpu_data->perf_caps, target_freq);
 	cpu_data->perf_ctrls.desired_perf = desired_perf;
 	ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls);
 
@@ -530,7 +436,7 @@  static int cppc_get_cpu_power(struct device *cpu_dev,
 	min_step = min_cap / CPPC_EM_CAP_STEP;
 	max_step = max_cap / CPPC_EM_CAP_STEP;
 
-	perf_prev = cppc_cpufreq_khz_to_perf(cpu_data, *KHz);
+	perf_prev = cppc_khz_to_perf(perf_caps, *KHz);
 	step = perf_prev / perf_step;
 
 	if (step > max_step)
@@ -550,8 +456,8 @@  static int cppc_get_cpu_power(struct device *cpu_dev,
 			perf = step * perf_step;
 	}
 
-	*KHz = cppc_cpufreq_perf_to_khz(cpu_data, perf);
-	perf_check = cppc_cpufreq_khz_to_perf(cpu_data, *KHz);
+	*KHz = cppc_perf_to_khz(perf_caps, perf);
+	perf_check = cppc_khz_to_perf(perf_caps, *KHz);
 	step_check = perf_check / perf_step;
 
 	/*
@@ -561,8 +467,8 @@  static int cppc_get_cpu_power(struct device *cpu_dev,
 	 */
 	while ((*KHz == prev_freq) || (step_check != step)) {
 		perf++;
-		*KHz = cppc_cpufreq_perf_to_khz(cpu_data, perf);
-		perf_check = cppc_cpufreq_khz_to_perf(cpu_data, *KHz);
+		*KHz = cppc_perf_to_khz(perf_caps, perf);
+		perf_check = cppc_khz_to_perf(perf_caps, *KHz);
 		step_check = perf_check / perf_step;
 	}
 
@@ -591,7 +497,7 @@  static int cppc_get_cpu_cost(struct device *cpu_dev, unsigned long KHz,
 	perf_caps = &cpu_data->perf_caps;
 	max_cap = arch_scale_cpu_capacity(cpu_dev->id);
 
-	perf_prev = cppc_cpufreq_khz_to_perf(cpu_data, KHz);
+	perf_prev = cppc_khz_to_perf(perf_caps, KHz);
 	perf_step = CPPC_EM_CAP_STEP * perf_caps->highest_perf / max_cap;
 	step = perf_prev / perf_step;
 
@@ -643,6 +549,7 @@  static void cppc_cpufreq_register_em(struct cpufreq_policy *policy)
 		EM_ADV_DATA_CB(cppc_get_cpu_power, cppc_get_cpu_cost);
 
 	cpu_data = policy->driver_data;
+
 	em_dev_register_perf_domain(get_cpu_device(policy->cpu),
 			get_perf_level_count(policy), &em_cb,
 			cpu_data->shared_cpu_map, 0);
@@ -724,20 +631,20 @@  static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	 * Set min to lowest nonlinear perf to avoid any efficiency penalty (see
 	 * Section 8.4.7.1.1.5 of ACPI 6.1 spec)
 	 */
-	policy->min = cppc_cpufreq_perf_to_khz(cpu_data,
-					       caps->lowest_nonlinear_perf);
-	policy->max = cppc_cpufreq_perf_to_khz(cpu_data,
-					       caps->nominal_perf);
+	policy->min = cppc_perf_to_khz(caps,
+				       caps->lowest_nonlinear_perf);
+	policy->max = cppc_perf_to_khz(caps,
+				       caps->nominal_perf);
 
 	/*
 	 * Set cpuinfo.min_freq to Lowest to make the full range of performance
 	 * available if userspace wants to use any perf between lowest & lowest
 	 * nonlinear perf
 	 */
-	policy->cpuinfo.min_freq = cppc_cpufreq_perf_to_khz(cpu_data,
-							    caps->lowest_perf);
-	policy->cpuinfo.max_freq = cppc_cpufreq_perf_to_khz(cpu_data,
-							    caps->nominal_perf);
+	policy->cpuinfo.min_freq = cppc_perf_to_khz(caps,
+						    caps->lowest_perf);
+	policy->cpuinfo.max_freq = cppc_perf_to_khz(caps,
+						    caps->nominal_perf);
 
 	policy->transition_delay_us = cppc_cpufreq_get_transition_delay_us(cpu);
 	policy->shared_type = cpu_data->shared_type;
@@ -773,7 +680,7 @@  static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
 		boost_supported = true;
 
 	/* Set policy->cur to max now. The governors will adjust later. */
-	policy->cur = cppc_cpufreq_perf_to_khz(cpu_data, caps->highest_perf);
+	policy->cur = cppc_perf_to_khz(caps, caps->highest_perf);
 	cpu_data->perf_ctrls.desired_perf =  caps->highest_perf;
 
 	ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls);
@@ -863,7 +770,7 @@  static unsigned int cppc_cpufreq_get_rate(unsigned int cpu)
 	delivered_perf = cppc_perf_from_fbctrs(cpu_data, &fb_ctrs_t0,
 					       &fb_ctrs_t1);
 
-	return cppc_cpufreq_perf_to_khz(cpu_data, delivered_perf);
+	return cppc_perf_to_khz(&cpu_data->perf_caps, delivered_perf);
 }
 
 static int cppc_cpufreq_set_boost(struct cpufreq_policy *policy, int state)
@@ -878,11 +785,11 @@  static int cppc_cpufreq_set_boost(struct cpufreq_policy *policy, int state)
 	}
 
 	if (state)
-		policy->max = cppc_cpufreq_perf_to_khz(cpu_data,
-						       caps->highest_perf);
+		policy->max = cppc_perf_to_khz(caps,
+					       caps->highest_perf);
 	else
-		policy->max = cppc_cpufreq_perf_to_khz(cpu_data,
-						       caps->nominal_perf);
+		policy->max = cppc_perf_to_khz(caps,
+					       caps->nominal_perf);
 	policy->cpuinfo.max_freq = policy->max;
 
 	ret = freq_qos_update_request(policy->max_freq_req, policy->max);
@@ -937,7 +844,7 @@  static unsigned int hisi_cppc_cpufreq_get_rate(unsigned int cpu)
 	if (ret < 0)
 		return -EIO;
 
-	return cppc_cpufreq_perf_to_khz(cpu_data, desired_perf);
+	return cppc_perf_to_khz(&cpu_data->perf_caps, desired_perf);
 }
 
 static void cppc_check_hisi_workaround(void)
diff --git a/include/acpi/cppc_acpi.h b/include/acpi/cppc_acpi.h
index 6126c977ece0..3a0995f8bce8 100644
--- a/include/acpi/cppc_acpi.h
+++ b/include/acpi/cppc_acpi.h
@@ -144,6 +144,8 @@  extern int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls);
 extern int cppc_set_enable(int cpu, bool enable);
 extern int cppc_get_perf_caps(int cpu, struct cppc_perf_caps *caps);
 extern bool cppc_perf_ctrs_in_pcc(void);
+extern unsigned int cppc_perf_to_khz(struct cppc_perf_caps *caps, unsigned int perf);
+extern unsigned int cppc_khz_to_perf(struct cppc_perf_caps *caps, unsigned int freq);
 extern bool acpi_cpc_valid(void);
 extern bool cppc_allow_fast_switch(void);
 extern int acpi_get_psd_map(unsigned int cpu, struct cppc_cpudata *cpu_data);