diff mbox series

[v6,2/6] drm/mediatek: dsi: Improves the DSI lane setup robustness

Message ID 20231023-display-support-v6-2-c6af4f34f4d8@baylibre.com (mailing list archive)
State New
Headers show
Series Add display support for the MT8365-EVK board | expand

Commit Message

Alexandre Mergnat Jan. 9, 2025, 10:37 a.m. UTC 
Currently, mtk_dsi_lane_ready (which setup the DSI lane) is triggered
before mtk_dsi_poweron. lanes_ready flag toggle to true during
mtk_dsi_lane_ready function, and the DSI module is set up during
mtk_dsi_poweron.

Later, during panel driver init, mtk_dsi_lane_ready is triggered but does
nothing because lanes are considered ready. Unfortunately, when the panel
driver try to communicate, the DSI returns a timeout.

The solution found here is to put lanes_ready flag to false after the DSI
module setup into mtk_dsi_poweron to init the DSI lanes after the power /
setup of the DSI module.

Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index e61b9bc68e9a..dcf0d93881b5 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -724,6 +724,8 @@  static int mtk_dsi_poweron(struct mtk_dsi *dsi)
 	mtk_dsi_config_vdo_timing(dsi);
 	mtk_dsi_set_interrupt_enable(dsi);
 
+	dsi->lanes_ready = false;
+
 	return 0;
 err_disable_engine_clk:
 	clk_disable_unprepare(dsi->engine_clk);