diff mbox series

[3/6] MIPS: NI 169445: Fix NAND GPIOs

Message ID 20231108-fix-mips-nand-v1-3-5fc5586d04de@linaro.org (mailing list archive)
State New, archived
Headers show
Series Fix polarity and bindings for GPIO-based NAND drivers | expand

Commit Message

Linus Walleij Nov. 8, 2023, 2:33 p.m. UTC
This changes the GPIOs defined in the device tree to recommended
practice, which is also what the Linux NAND GPIO driver is actually
using.

In the process, fix up the CE and WP lines to be active low, as is
required for proper hardware description.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/mips/boot/dts/ni/169445.dts | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/mips/boot/dts/ni/169445.dts b/arch/mips/boot/dts/ni/169445.dts
index 5389ef46c480..3e7b46d5072c 100644
--- a/arch/mips/boot/dts/ni/169445.dts
+++ b/arch/mips/boot/dts/ni/169445.dts
@@ -1,4 +1,5 @@ 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	#address-cells = <1>;
@@ -57,18 +58,18 @@  gpio2: gpio@14 {
 			no-output;
 		};
 
-		nand@0 {
+		nand-controller@0 {
 			compatible = "gpio-control-nand";
 			nand-on-flash-bbt;
 			nand-ecc-mode = "soft_bch";
 			nand-ecc-step-size = <512>;
 			nand-ecc-strength = <4>;
 			reg = <0x0 4>;
-			gpios = <&gpio2 0 0>, /* rdy */
-				<&gpio1 1 0>, /* nce */
-				<&gpio1 2 0>, /* ale */
-				<&gpio1 3 0>, /* cle */
-				<&gpio1 4 0>; /* nwp */
+			rdy-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+			ce-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			ale-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			cle-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			wp-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		};
 
 		serial@80000 {