diff mbox series

[14/14] arm: multi_v7_defconfig: Enable CONFIG_RAVB

Message ID 20231120070024.4079344-15-claudiu.beznea.uj@bp.renesas.com (mailing list archive)
State New, archived
Headers show
Series renesas: rzg3s: Add support for Ethernet | expand

Commit Message

Claudiu Beznea Nov. 20, 2023, 7 a.m. UTC 
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

ravb driver is used by RZ/G1H. Enable it in multi_v7_defconfig.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

Comments

Arnd Bergmann Nov. 20, 2023, 8:44 a.m. UTC | #1 
On Mon, Nov 20, 2023, at 08:00, Claudiu wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> ravb driver is used by RZ/G1H. Enable it in multi_v7_defconfig.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

We have a mix of =y and =m for ethernet drivers, and usually
only have drivers built-in when they are frequently tested
with NFS root booting.

Do you need this as well, or could it be =m instead?

    Arnd
Claudiu Beznea Nov. 20, 2023, 8:56 a.m. UTC | #2 
On 20.11.2023 10:44, Arnd Bergmann wrote:
> On Mon, Nov 20, 2023, at 08:00, Claudiu wrote:
>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>>
>> ravb driver is used by RZ/G1H. Enable it in multi_v7_defconfig.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> 
> We have a mix of =y and =m for ethernet drivers, and usually
> only have drivers built-in when they are frequently tested
> with NFS root booting.
> 
> Do you need this as well, or could it be =m instead?

I would prefer to have it =y as internal testing infrastructure is using NFS.

Thank you,
Claudiu Beznea

> 
>     Arnd
Geert Uytterhoeven Nov. 20, 2023, 8:58 a.m. UTC | #3 
On Mon, Nov 20, 2023 at 9:44 AM Arnd Bergmann <arnd@arndb.de> wrote:
> On Mon, Nov 20, 2023, at 08:00, Claudiu wrote:
> > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> >
> > ravb driver is used by RZ/G1H. Enable it in multi_v7_defconfig.

Used by:
  - iWave-RZ/G1M/G1N Qseven carrier board,
  - iWave-RZ/G1H Qseven board,
  - iWave-RZG1E SODIMM carrier board,
  - iWave-RZ/G1C single board computer.

So I'd write "used by various iWave RZ/G1 development boards".

> > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> We have a mix of =y and =m for ethernet drivers, and usually
> only have drivers built-in when they are frequently tested
> with NFS root booting.
>
> Do you need this as well, or could it be =m instead?

As the default chosen/bootargs for the iWave-RZ/G1M/G1N Qseven carrier
board contains root=/dev/nfs, builtin is appropriate.
The iWave-RZ/G1H Qseven board defaults to root=/dev/mmcblk0p1.

Gr{oetje,eeting}s,

                        Geert
Claudiu Beznea Nov. 20, 2023, 9:05 a.m. UTC | #4 
On 20.11.2023 10:58, Geert Uytterhoeven wrote:
> On Mon, Nov 20, 2023 at 9:44 AM Arnd Bergmann <arnd@arndb.de> wrote:
>> On Mon, Nov 20, 2023, at 08:00, Claudiu wrote:
>>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>>>
>>> ravb driver is used by RZ/G1H. Enable it in multi_v7_defconfig.
> 
> Used by:
>   - iWave-RZ/G1M/G1N Qseven carrier board,
>   - iWave-RZ/G1H Qseven board,
>   - iWave-RZG1E SODIMM carrier board,
>   - iWave-RZ/G1C single board computer.
> 
> So I'd write "used by various iWave RZ/G1 development boards".

OK, I'll update it in v2.

I noticed it is needed while checking various bits on a RZ/G1H based board
so I considered that if there is at least one user for it it is enough to
have it enabled.

Thank you,
Claudiu Beznea

> 
>>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>>
>> We have a mix of =y and =m for ethernet drivers, and usually
>> only have drivers built-in when they are frequently tested
>> with NFS root booting.
>>
>> Do you need this as well, or could it be =m instead?
> 
> As the default chosen/bootargs for the iWave-RZ/G1M/G1N Qseven carrier
> board contains root=/dev/nfs, builtin is appropriate.
> The iWave-RZ/G1H Qseven board defaults to root=/dev/mmcblk0p1.
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
>
Geert Uytterhoeven Nov. 27, 2023, 10:01 a.m. UTC | #5 
On Mon, Nov 20, 2023 at 9:58 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> On Mon, Nov 20, 2023 at 9:44 AM Arnd Bergmann <arnd@arndb.de> wrote:
> > On Mon, Nov 20, 2023, at 08:00, Claudiu wrote:
> > > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> > >
> > > ravb driver is used by RZ/G1H. Enable it in multi_v7_defconfig.
>
> Used by:
>   - iWave-RZ/G1M/G1N Qseven carrier board,
>   - iWave-RZ/G1H Qseven board,
>   - iWave-RZG1E SODIMM carrier board,
>   - iWave-RZ/G1C single board computer.
>
> So I'd write "used by various iWave RZ/G1 development boards".

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v6.8, with the above updated.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 10fd74bf85f9..9a04564566a7 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -272,6 +272,7 @@  CONFIG_KS8851=y
 CONFIG_LAN966X_SWITCH=m
 CONFIG_R8169=y
 CONFIG_SH_ETH=y
+CONFIG_RAVB=y
 CONFIG_SMSC911X=y
 CONFIG_SNI_AVE=y
 CONFIG_STMMAC_ETH=y