diff mbox series

[net-next,RFC,v2,03/11] net: phy: add initial support for PHY package in DT

Message ID 20231125001127.5674-4-ansuelsmth@gmail.com (mailing list archive)
State New, archived
Headers show
Series net: phy: Support DT PHY package | expand

Commit Message

Christian Marangi Nov. 25, 2023, 12:11 a.m. UTC
Add initial support for PHY package in DT.

Make it easier to define PHY package and describe the global PHY
directly in DT by refereincing them by phandles instead of custom
functions in each PHY driver.

Each PHY in a package needs to be defined in a dedicated node in the
mdio node. This dedicated node needs to have the node name with the
prefix "ethernet-phy-package".

With this defined, the generic PHY probe will join each PHY in this
dedicated node to the package.

PHY driver MUST set the required global PHY count in
.phy_package_global_phy_num and define .phy_package_global_phys_offset
as the table of offset of the required global PHYs for PHY package
global configuration.

mdio_bus.c and of_mdio.c is updated to now support and parse also
PHY package subnote by checking if the node name have the prefix
"ethernet-phy-package".

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/net/mdio/of_mdio.c   | 68 +++++++++++++++++++++++++-----------
 drivers/net/phy/mdio_bus.c   | 35 ++++++++++++++-----
 drivers/net/phy/phy_device.c | 61 ++++++++++++++++++++++++++++++++
 include/linux/phy.h          |  9 +++++
 4 files changed, 144 insertions(+), 29 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index 64ebcb6d235c..de2ebb59d2d2 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -139,6 +139,47 @@  bool of_mdiobus_child_is_phy(struct device_node *child)
 }
 EXPORT_SYMBOL(of_mdiobus_child_is_phy);
 
+static int __of_mdiobus_parse_phys(struct mii_bus *mdio, struct device_node *np,
+				   bool *scanphys)
+{
+	struct device_node *child;
+	int addr, rc = 0;
+
+	/* Loop over the child nodes and register a phy_device for each phy */
+	for_each_available_child_of_node(np, child) {
+		if (of_node_name_prefix(child, "ethernet-phy-package")) {
+			rc = __of_mdiobus_parse_phys(mdio, child, scanphys);
+			if (rc && rc != -ENODEV)
+				goto exit;
+
+			continue;
+		}
+
+		addr = of_mdio_parse_addr(&mdio->dev, child);
+		if (addr < 0) {
+			*scanphys = true;
+			continue;
+		}
+
+		if (of_mdiobus_child_is_phy(child))
+			rc = of_mdiobus_register_phy(mdio, child, addr);
+		else
+			rc = of_mdiobus_register_device(mdio, child, addr);
+
+		if (rc == -ENODEV)
+			dev_err(&mdio->dev,
+				"MDIO device at address %d is missing.\n",
+				addr);
+		else if (rc)
+			goto exit;
+	}
+
+	return 0;
+exit:
+	of_node_put(child);
+	return rc;
+}
+
 /**
  * __of_mdiobus_register - Register mii_bus and create PHYs from the device tree
  * @mdio: pointer to mii_bus structure
@@ -180,25 +221,9 @@  int __of_mdiobus_register(struct mii_bus *mdio, struct device_node *np,
 		return rc;
 
 	/* Loop over the child nodes and register a phy_device for each phy */
-	for_each_available_child_of_node(np, child) {
-		addr = of_mdio_parse_addr(&mdio->dev, child);
-		if (addr < 0) {
-			scanphys = true;
-			continue;
-		}
-
-		if (of_mdiobus_child_is_phy(child))
-			rc = of_mdiobus_register_phy(mdio, child, addr);
-		else
-			rc = of_mdiobus_register_device(mdio, child, addr);
-
-		if (rc == -ENODEV)
-			dev_err(&mdio->dev,
-				"MDIO device at address %d is missing.\n",
-				addr);
-		else if (rc)
-			goto unregister;
-	}
+	rc = __of_mdiobus_parse_phys(mdio, np, &scanphys);
+	if (rc)
+		goto unregister;
 
 	if (!scanphys)
 		return 0;
@@ -227,15 +252,16 @@  int __of_mdiobus_register(struct mii_bus *mdio, struct device_node *np,
 				if (!rc)
 					break;
 				if (rc != -ENODEV)
-					goto unregister;
+					goto put_unregister;
 			}
 		}
 	}
 
 	return 0;
 
-unregister:
+put_unregister:
 	of_node_put(child);
+unregister:
 	mdiobus_unregister(mdio);
 	return rc;
 }
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 25dcaa49ab8b..5ba43d593c6b 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -455,19 +455,25 @@  EXPORT_SYMBOL(of_mdio_find_bus);
  * found, set the of_node pointer for the mdio device. This allows
  * auto-probed phy devices to be supplied with information passed in
  * via DT.
+ * If a PHY package is found, PHY is searched also there.
  */
-static void of_mdiobus_link_mdiodev(struct mii_bus *bus,
-				    struct mdio_device *mdiodev)
+static int of_mdiobus_find_phy(struct device *dev, struct mdio_device *mdiodev,
+			       struct device_node *np)
 {
-	struct device *dev = &mdiodev->dev;
 	struct device_node *child;
 
-	if (dev->of_node || !bus->dev.of_node)
-		return;
-
-	for_each_available_child_of_node(bus->dev.of_node, child) {
+	for_each_available_child_of_node(np, child) {
 		int addr;
 
+		if (of_node_name_prefix(child, "ethernet-phy-package")) {
+			if (!of_mdiobus_find_phy(dev, mdiodev, child)) {
+				of_node_put(child);
+				return 0;
+			}
+
+			continue;
+		}
+
 		addr = of_mdio_parse_addr(dev, child);
 		if (addr < 0)
 			continue;
@@ -477,9 +483,22 @@  static void of_mdiobus_link_mdiodev(struct mii_bus *bus,
 			/* The refcount on "child" is passed to the mdio
 			 * device. Do _not_ use of_node_put(child) here.
 			 */
-			return;
+			return 0;
 		}
 	}
+
+	return -ENODEV;
+}
+
+static void of_mdiobus_link_mdiodev(struct mii_bus *bus,
+				    struct mdio_device *mdiodev)
+{
+	struct device *dev = &mdiodev->dev;
+
+	if (dev->of_node || !bus->dev.of_node)
+		return;
+
+	of_mdiobus_find_phy(dev, mdiodev, bus->dev.of_node);
 }
 #else /* !IS_ENABLED(CONFIG_OF_MDIO) */
 static inline void of_mdiobus_link_mdiodev(struct mii_bus *mdio,
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index e016dbfb0d27..f25bedb69b90 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -3193,6 +3193,62 @@  static int of_phy_leds(struct phy_device *phydev)
 	return 0;
 }
 
+static int of_phy_package(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	struct device_node *package_node;
+	const u8 *global_phys_offset;
+	int *global_phys_addr;
+	u8 global_phys_num;
+	u32 base_addr;
+	int i, ret;
+
+	if (!node)
+		return 0;
+
+	package_node = of_get_parent(node);
+	if (!package_node)
+		return 0;
+
+	if (!of_node_name_prefix(package_node, "ethernet-phy-package"))
+		return 0;
+
+	if (of_property_read_u32(package_node, "reg", &base_addr))
+		return -EINVAL;
+
+	global_phys_num = phydev->drv->phy_package_global_phys_num;
+	global_phys_offset = phydev->drv->phy_package_global_phys_offset;
+	if (!global_phys_num || !global_phys_offset)
+		return -EINVAL;
+
+	global_phys_addr = kmalloc_array(global_phys_num, sizeof(*global_phys_addr),
+					 GFP_KERNEL);
+	if (!global_phys_addr)
+		return -ENOMEM;
+
+	for (i = 0; i < global_phys_num; i++) {
+		int addr = base_addr + global_phys_offset[i];
+
+		/* Make sure the calculated address is valid */
+		if (unlikely(addr >= PHY_MAX_ADDR))
+			return -EINVAL;
+
+		global_phys_addr[i] = addr;
+	}
+
+	ret = devm_phy_package_join(&phydev->mdio.dev, phydev, global_phys_addr,
+				    global_phys_num, 0);
+	if (ret)
+		goto exit;
+
+	phydev->shared->np = package_node;
+
+exit:
+	kfree(global_phys_addr);
+
+	return ret;
+}
+
 /**
  * fwnode_mdio_find_device - Given a fwnode, find the mdio_device
  * @fwnode: pointer to the mdio_device's fwnode
@@ -3301,6 +3357,11 @@  static int phy_probe(struct device *dev)
 	if (phydrv->flags & PHY_IS_INTERNAL)
 		phydev->is_internal = true;
 
+	/* Parse DT to detect PHY package and join them */
+	err = of_phy_package(phydev);
+	if (err)
+		goto out;
+
 	/* Deassert the reset signal */
 	phy_device_reset(phydev, 0);
 
diff --git a/include/linux/phy.h b/include/linux/phy.h
index c2bb3f0b9dda..3f75ae85b740 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -327,6 +327,7 @@  struct mdio_bus_stats {
 
 /**
  * struct phy_package_shared - Shared information in PHY packages
+ * @np: Pointer to the Device Node if PHY package defined in DT
  * @addrs: List of common PHY addresses used to combine PHYs in one package
  * @addrs_num: Number of common PHY addresses in addrs list
  * @refcnt: Number of PHYs connected to this shared data
@@ -339,6 +340,8 @@  struct mdio_bus_stats {
  * phy_package_leave().
  */
 struct phy_package_shared {
+	/* With PHY package defined in DT this points to the PHY package node */
+	struct device_node *np;
 	/* addrs list pointer */
 	/* note that this pointer is shared between different phydevs.
 	 * It is allocated and freed automatically by phy_package_join() and
@@ -888,6 +891,10 @@  struct phy_led {
  * @flags: A bitfield defining certain other features this PHY
  *   supports (like interrupts)
  * @driver_data: Static driver data
+ * @phy_package_global_phys_offset: Table of offset of the required
+ *  global PHYs for PHY package global configuration.
+ * @phy_package_global_phys_num: Num of the required global PHYs
+ *   for PHY package global configuration.
  *
  * All functions are optional. If config_aneg or read_status
  * are not implemented, the phy core uses the genphy versions.
@@ -905,6 +912,8 @@  struct phy_driver {
 	const unsigned long * const features;
 	u32 flags;
 	const void *driver_data;
+	const u8 *phy_package_global_phys_offset;
+	const u8 phy_package_global_phys_num;
 
 	/**
 	 * @soft_reset: Called to issue a PHY software reset