| Message ID | 20231127193602.151499-1-afd@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] arm64: dts: ti: k3-am625-beagleplay: Use UART name in pinmux name | expand |
Hi Andrew Davis, On Mon, 27 Nov 2023 13:36:02 -0600, Andrew Davis wrote: > The main_uart0 may not always be the console, but it will always be > the UART0 in MAIN domain. Name the pinmux node to match. This makes > it consistent with all other TI SoC based boards. > > I have applied the following to branch ti-k3-dts-next on [1]. Thank you! [1/1] arm64: dts: ti: k3-am625-beagleplay: Use UART name in pinmux name commit: 649e121f9301a4d275b68323a9807b762618e516 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. [1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts index 9a6bd0a3c94f7..eadbdd9ffe377 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -443,7 +443,7 @@ AM62X_IOPAD(0x01a8, PIN_INPUT, 7) /* (D20) MCASP0_AFSX.GPIO1_12 */ >; }; - console_pins_default: console-default-pins { + main_uart0_pins_default: main-uart0-default-pins { bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ @@ -877,7 +877,7 @@ wlcore: wlcore@2 { &main_uart0 { bootph-all; pinctrl-names = "default"; - pinctrl-0 = <&console_pins_default>; + pinctrl-0 = <&main_uart0_pins_default>; status = "okay"; };
The main_uart0 may not always be the console, but it will always be the UART0 in MAIN domain. Name the pinmux node to match. This makes it consistent with all other TI SoC based boards. Signed-off-by: Andrew Davis <afd@ti.com> --- Changes for v2: - Update node name to -pins postfix - Rebase on v6.7-rc1 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)