@@ -22,13 +22,11 @@
#include <sound/soc-dapm.h>
#include <sound/initval.h>
#include <sound/tlv.h>
-#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <sound/cs35l33.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/machine.h>
-#include <linux/of_gpio.h>
#include <linux/of.h>
#include "cs35l33.h"
@@ -1165,7 +1163,7 @@ static int cs35l33_i2c_probe(struct i2c_client *i2c_client)
/* We could issue !RST or skip it based on AMP topology */
cs35l33->reset_gpio = devm_gpiod_get_optional(&i2c_client->dev,
- "reset-gpios", GPIOD_OUT_HIGH);
+ "reset", GPIOD_OUT_HIGH);
if (IS_ERR(cs35l33->reset_gpio)) {
dev_err(&i2c_client->dev, "%s ERROR: Can't get reset GPIO\n",
__func__);
This driver includes the legacy GPIO APIs <linux/gpio.h> and <linux/of_gpio.h> but does not use any symbols from any of them. Drop the includes. Further the driver is requesting "reset-gpios" rather than just "gpios" from the GPIO framework. This is wrong because the gpiolib core will add "-gpios" before processing the request from e.g. device tree. Drop the suffix. The last problem means that the optional RESET GPIO has never been properly retrieved and used even if it existed, but nobody noticed. Fixes: 3333cb7187b9 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- sound/soc/codecs/cs35l33.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)