diff mbox series

ARM: dts: imx27-phytec-phycore-som: Use the mux- prefix

Message ID 20231206124529.2256756-1-festevam@gmail.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: imx27-phytec-phycore-som: Use the mux- prefix | expand

Commit Message

Fabio Estevam Dec. 6, 2023, 12:45 p.m. UTC 
From: Fabio Estevam <festevam@denx.de>

According to Documentation/devicetree/bindings/sound/imx-audmux.yaml,
there must be a "mux-" prefix in the audmux port nodes.

Add the "mux-" prefix to avoid the following dt-schema warning:

imx27-phytec-phycore-rdk.dtb: audmux@10016000: 'pins4', 'ssi0' do not match any of the regexes: '^mux-[0-9a-z]*$', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/sound/imx-audmux.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
 arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Shawn Guo Dec. 13, 2023, 9:14 a.m. UTC | #1 
On Wed, Dec 06, 2023 at 09:45:29AM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> According to Documentation/devicetree/bindings/sound/imx-audmux.yaml,
> there must be a "mux-" prefix in the audmux port nodes.
> 
> Add the "mux-" prefix to avoid the following dt-schema warning:
> 
> imx27-phytec-phycore-rdk.dtb: audmux@10016000: 'pins4', 'ssi0' do not match any of the regexes: '^mux-[0-9a-z]*$', 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/sound/imx-audmux.yaml#
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
index 8d428c844666..dc316358a7d4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
@@ -49,12 +49,12 @@  &audmux {
 	status = "okay";
 
 	/* SSI0 <=> PINS_4 (MC13783 Audio) */
-	ssi0 {
+	mux-ssi0 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <0xcb205000>;
 	};
 
-	pins4 {
+	mux-pins4 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <0x00001000>;
 	};