[1/3] arm64: dts: imx8mp-verdin: Fix USB connector description

Commit Message

Fabio Estevam Dec. 7, 2023, 6:55 p.m. UTC

From: Fabio Estevam <[e-mail]>

The USB connector should not be placed under the dwc3 node.

Move the USB connector out of the SoC level and use port to describe
the connection to the dwc3 controller.

This fixes the following dt-schema warning:

imx8mp-verdin-wifi-mallow.dtb: usb@32f10100: usb@38100000: Unevaluated properties are not allowed ('connector' was unexpected)
	from schema $id: http://devicetree.org/schemas/usb/fsl,imx8mp-dwc3.yaml#
	
Signed-off-by: Fabio Estevam <[e-mail]>
---
 .../boot/dts/freescale/imx8mp-verdin.dtsi     | 30 +++++++++++++------
 1 file changed, 21 insertions(+), 9 deletions(-)

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index 04f2083c4ab2..c3305f0d4001 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -45,6 +45,23 @@  backlight_mezzanine: backlight-mezzanine {
 		status = "disabled";
 	};
 
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		label = "Type-C";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_1_id>;
+		self-powered;
+		type = "micro";
+		vbus-supply = <&reg_usb1_vbus>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -835,15 +852,10 @@  &usb_dwc3_0 {
 	srp-disable;
 	usb-role-switch;
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-		label = "Type-C";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_1_id>;
-		self-powered;
-		type = "micro";
-		vbus-supply = <&reg_usb1_vbus>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };