diff mbox series

[v4,1/2] i2c: aspeed: Handle the coalesced stop conditions with the start conditions.

Message ID 20231211102217.2436294-2-quan@os.amperecomputing.com (mailing list archive)
State New, archived
Headers show
Series i2c: aspeed: Late ack Tx done irqs and handle coalesced start with stop conditions | expand

Commit Message

Quan Nguyen Dec. 11, 2023, 10:22 a.m. UTC
Some masters may drive the transfers with low enough latency between
the nak/stop phase of the current command and the start/address phase
of the following command that the interrupts are coalesced by the
time we process them.
Handle the stop conditions before processing SLAVE_MATCH to fix the
complaints that sometimes occur below.

"aspeed-i2c-bus 1e78a040.i2c-bus: irq handled != irq. Expected
0x00000086, but was 0x00000084"

Fixes: f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed I2C driver")
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
---
v4:
  + Add an extra empty line before the comment                        [Andrew]

Note: I'd like to keep adding Reviewed-by Andrew and Andi for this patch
eventhough there is an extra empty line added before the comment as mentioned
above. Thanks for the review.

v3:
  + Change to handle the coalesced stop condition with the start
conditions                                                            [Andrew]
  + Revised commit message                                              [Quan]

v2:
  + Split to separate series                                            [Joel]
  + Added the Fixes line                                                [Joel]
  + Revised commit message                                              [Quan]

v1:
  + First introduced in
https://lore.kernel.org/all/20210519074934.20712-1-quan@os.amperecomputing.com/
---
 drivers/i2c/busses/i2c-aspeed.c | 48 ++++++++++++++++++++++-----------
 1 file changed, 32 insertions(+), 16 deletions(-)

Comments

Andi Shyti Dec. 15, 2023, 1:42 a.m. UTC | #1
Hi Quan,

On Mon, Dec 11, 2023 at 05:22:16PM +0700, Quan Nguyen wrote:
> Some masters may drive the transfers with low enough latency between
> the nak/stop phase of the current command and the start/address phase
> of the following command that the interrupts are coalesced by the
> time we process them.
> Handle the stop conditions before processing SLAVE_MATCH to fix the
> complaints that sometimes occur below.
> 
> "aspeed-i2c-bus 1e78a040.i2c-bus: irq handled != irq. Expected
> 0x00000086, but was 0x00000084"
> 
> Fixes: f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed I2C driver")
> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
> Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
> ---
> v4:
>   + Add an extra empty line before the comment                        [Andrew]
> 
> Note: I'd like to keep adding Reviewed-by Andrew and Andi for this patch
> eventhough there is an extra empty line added before the comment as mentioned
> above. Thanks for the review.

that's OK and you should. You would remove the r-b/a-b only if
you do some major changes. Besides, this change was asked both by
me and Andrew.

Thanks,
Andi
Wolfram Sang Dec. 19, 2023, 8:55 p.m. UTC | #2
On Mon, Dec 11, 2023 at 05:22:16PM +0700, Quan Nguyen wrote:
> Some masters may drive the transfers with low enough latency between
> the nak/stop phase of the current command and the start/address phase
> of the following command that the interrupts are coalesced by the
> time we process them.
> Handle the stop conditions before processing SLAVE_MATCH to fix the
> complaints that sometimes occur below.
> 
> "aspeed-i2c-bus 1e78a040.i2c-bus: irq handled != irq. Expected
> 0x00000086, but was 0x00000084"
> 
> Fixes: f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed I2C driver")
> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
> Reviewed-by: Andi Shyti <andi.shyti@kernel.org>

Applied to for-current, thanks!

I'll wait with patch 2. It seems there are issues to be solved before.
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index 28e2a5fc4528..5511fd46a65e 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -249,18 +249,46 @@  static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 	if (!slave)
 		return 0;
 
-	command = readl(bus->base + ASPEED_I2C_CMD_REG);
+	/*
+	 * Handle stop conditions early, prior to SLAVE_MATCH. Some masters may drive
+	 * transfers with low enough latency between the nak/stop phase of the current
+	 * command and the start/address phase of the following command that the
+	 * interrupts are coalesced by the time we process them.
+	 */
+	if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
+		irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP;
+		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	}
+
+	if (irq_status & ASPEED_I2CD_INTR_TX_NAK &&
+	    bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
+		irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
+		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	}
+
+	/* Propagate any stop conditions to the slave implementation. */
+	if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
+		i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
+		bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
+	}
 
-	/* Slave was requested, restart state machine. */
+	/*
+	 * Now that we've dealt with any potentially coalesced stop conditions,
+	 * address any start conditions.
+	 */
 	if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
 		irq_handled |= ASPEED_I2CD_INTR_SLAVE_MATCH;
 		bus->slave_state = ASPEED_I2C_SLAVE_START;
 	}
 
-	/* Slave is not currently active, irq was for someone else. */
+	/*
+	 * If the slave has been stopped and not started then slave interrupt
+	 * handling is complete.
+	 */
 	if (bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE)
 		return irq_handled;
 
+	command = readl(bus->base + ASPEED_I2C_CMD_REG);
 	dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
 		irq_status, command);
 
@@ -279,17 +307,6 @@  static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 		irq_handled |= ASPEED_I2CD_INTR_RX_DONE;
 	}
 
-	/* Slave was asked to stop. */
-	if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
-		irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP;
-		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
-	}
-	if (irq_status & ASPEED_I2CD_INTR_TX_NAK &&
-	    bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
-		irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
-		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
-	}
-
 	switch (bus->slave_state) {
 	case ASPEED_I2C_SLAVE_READ_REQUESTED:
 		if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_ACK))
@@ -324,8 +341,7 @@  static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 		i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
 		break;
 	case ASPEED_I2C_SLAVE_STOP:
-		i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
-		bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
+		/* Stop event handling is done early. Unreachable. */
 		break;
 	case ASPEED_I2C_SLAVE_START:
 		/* Slave was just started. Waiting for the next event. */;