[v4,6/9] arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool

Message ID	20231213150435.4134390-7-wenst@chromium.org (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org> From: Chen-Yu Tsai <wenst@chromium.org> To: Matthias Brugger <matthias.bgg@gmail.com>, AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Chen-Yu Tsai <wenst@chromium.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, devicetree@vger.kernel.org, linux-mediatek@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Eugen Hristev <eugen.hristev@collabora.com>, Conor Dooley <conor.dooley@microchip.com> Subject: [PATCH v4 6/9] arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool Date: Wed, 13 Dec 2023 23:04:30 +0800 Message-ID: <20231213150435.4134390-7-wenst@chromium.org> In-Reply-To: <20231213150435.4134390-1-wenst@chromium.org> References: <20231213150435.4134390-1-wenst@chromium.org> MIME-Version: 1.0 Precedence: list Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org
Series	arm64: dts: mediatek: Add MT8186 Corsola Chromebooks \| expand [v4,0/9] arm64: dts: mediatek: Add MT8186 Corsola Chromebooks [v4,1/9] dt-bindings: arm: mediatek: Sort entries by SoC then board compatibles [v4,2/9] dt-bindings: arm: mediatek: Add MT8186 Tentacruel / Tentacool Chromebooks [v4,3/9] dt-bindings: arm: mediatek: Add MT8186 Steelix Chromebook [v4,4/9] dt-bindings: arm: mediatek: Add MT8186 Rusty Chromebook [v4,5/9] dt-bindings: arm: mediatek: Add MT8186 Magneton Chromebooks [v4,6/9] arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool [v4,7/9] arm64: dts: mediatek: Introduce MT8186 Steelix [v4,8/9] arm64: dts: mediatek: Add MT8186 Steelix platform based Rusty [v4,9/9] arm64: dts: mediatek: Add MT8186 Magneton Chromebooks

On Fri, Jan 19, 2024 at 9:19 PM AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> wrote: > > Il 14/12/23 15:37, Chen-Yu Tsai ha scritto: > > On Thu, Dec 14, 2023 at 7:31 PM AngeloGioacchino Del Regno > > <angelogioacchino.delregno@collabora.com> wrote: > >> > >> Il 13/12/23 16:04, Chen-Yu Tsai ha scritto: > >>> Tentacruel and Tentacool are MT8186 based Chromebooks based on the > >>> Krabby design. > >>> > >>> Tentacruel, also known as the ASUS Chromebook CM14 Flip CM1402F, is a > >>> convertible device with touchscreen and stylus. > >>> > >>> Tentacool, also known as the ASUS Chromebook CM14 CM1402C, is a laptop > >>> device. It does not have a touchscreen or stylus. > >>> > >>> The two devices both have two variants. The difference is a second > >>> source touchpad controller that shares the same address as the original, > >>> but is incompatible. > >>> > >>> The extra SKU IDs for the Tentacruel devices map to different sensor > >>> components attached to the Embedded Controller. These are not visible > >>> to the main processor. > >>> > >>> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> > >>> Acked-by: Conor Dooley <conor.dooley@microchip.com> > >>> --- > >>> Changes since v3: > >>> - Reorder some properties to conform better to the newly proposed DT > >>> style guidelines > >>> - Drop unused labels > >>> - Rename bt-sco node name to bt-sco-codec > >>> - Drop i2s*-share properties from afe node > >>> - Drop aud_gpio_tdm_{on,off} pinctrl nodes > >>> - Replace interrupts with interrupts-extended in tpm node > >>> - Enable adsp device > >>> > >>> Changes since v2: > >>> - Picked up Conor's ack > >>> - Rename touchpad to trackpad > >>> - Drop pinctrl properties from trackpad in tentacruel/tentacool second > >>> source trackpad > >>> > >>> Changes since v1: > >>> - Reorder SKU numbers in descending order. > >>> - Fixed pinconfig node names > >>> - Moved pinctrl-* properties after interrupts-* > >>> - Switched to interrupts-extended for external components > >>> - Marked ADSP as explicitly disabled, with a comment explaining that it > >>> stalls the system > >>> - Renamed "touchpad" to "trackpad" > >>> - Dropped bogus "no-laneswap" property from it6505 node > >>> - Moved "realtek,jd-src" property to after all the regulator supplies > >>> - Switched to macros for MT6366 regulator "regulator-allowed-modes" > >>> - Renamed "vgpu" regulator name to allow coupling, with a comment > >>> containing the name used in the design > >>> - Renamed "cr50" node name to "tpm" > >>> - Moved trackpad_pins reference up to i2c2; workaround for second source > >>> component resource sharing. > >>> - Fix copyright year > >>> - Fixed touchscreen supply name > >>> --- > >>> arch/arm64/boot/dts/mediatek/Makefile | 4 + > >>> .../dts/mediatek/mt8186-corsola-krabby.dtsi | 129 ++ > >>> .../mt8186-corsola-tentacool-sku327681.dts | 57 + > >>> .../mt8186-corsola-tentacool-sku327683.dts | 24 + > >>> .../mt8186-corsola-tentacruel-sku262144.dts | 44 + > >>> .../mt8186-corsola-tentacruel-sku262148.dts | 26 + > >>> .../boot/dts/mediatek/mt8186-corsola.dtsi | 1707 +++++++++++++++++ > >>> 7 files changed, 1991 insertions(+) > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi > >>> > >>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > >>> index e6e7592a3645..442af61b1305 100644 > >>> --- a/arch/arm64/boot/dts/mediatek/Makefile > >>> +++ b/arch/arm64/boot/dts/mediatek/Makefile > >>> @@ -43,6 +43,10 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262148.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb > >> > >> ..snip.. > >> > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts > >>> new file mode 100644 > >>> index 000000000000..447b57b12b41 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts > >>> @@ -0,0 +1,26 @@ > >>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > >>> +/* > >>> + * Copyright 2023 Google LLC > >>> + */ > >>> + > >>> +#include "mt8186-corsola-tentacruel-sku262144.dts" > >>> + > >>> +/ { > >>> + compatible = "google,tentacruel-sku262151", "google,tentacruel-sku262150", > >>> + "google,tentacruel-sku262149", "google,tentacruel-sku262148", > >>> + "google,tentacruel", "mediatek,mt8186"; > >>> +}; > >>> + > >>> +/* This variant replaces only the trackpad controller. */ > >>> +&i2c2 { > >>> + /delete-node/ trackpad@15; > >>> + > >>> + trackpad@15 { > >>> + compatible = "hid-over-i2c"; > >>> + reg = <0x15>; > >>> + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; > >>> + hid-descr-addr = <0x0001>; > >>> + vdd-supply = <&pp3300_s3>; > >>> + wakeup-source; > >>> + }; > >>> +}; > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi > >>> new file mode 100644 > >>> index 000000000000..adbeb0c765d3 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi > >>> @@ -0,0 +1,1707 @@ > >>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > >>> +/* > >>> + * Copyright (C) 2022 MediaTek Inc. > >>> + */ > >>> +/dts-v1/; > >>> +#include "mt8186.dtsi" > >>> +#include <dt-bindings/pinctrl/mt8186-pinfunc.h> > >>> +#include <dt-bindings/gpio/gpio.h> > >>> +#include <dt-bindings/input/input.h> > >>> +#include <dt-bindings/input/gpio-keys.h> > >>> +#include <dt-bindings/regulator/mediatek,mt6397-regulator.h> > >>> + > >> > >> ..snip.. > >> > >>> + > >>> +&i2c2 { > >>> + pinctrl-names = "default"; > >>> + /* > >>> + * Trackpad pin put here to work around second source components > >>> + * sharing the pinmux in steelix designs. > >>> + */ > >>> + pinctrl-0 = <&i2c2_pins>, <&trackpad_pin>; > >>> + clock-frequency = <400000>; > >>> + i2c-scl-internal-delay-ns = <10000>; > >>> + status = "okay"; > >>> + > >>> + trackpad@15 { > >>> + compatible = "elan,ekth3000"; > >> > >> You forgot to change this one. > >> > >> Remove compatible from this node and stop using /delete-node/ in device specific > >> devicetrees. > > > > I believe I already replied to the previous version why we can't and shouldn't > > do that. > > > > "elan,ekth3000" and "hid-over-i2c" have incompatible bindings, specifically > > the former uses "vcc-supply" while the latter uses "vdd-supply". > > > > One has to track down if a property is a "sharable" property or not, > > then put it in the correct place, otherwise getting DT binding validation > > errors. > > > > To me it seems cleaner to just delete the node wholesale to not have any > > remnants of the original node, i.e. start from a clean slate. Trying to > > "share" common properties is asking for a headache. > > > > This feels more like a preference thing. I also asked if deleting the node > > through the label would be cleaner, but you didn't reply. > > > > I am truly sorry for not replying to that - and for replying to this one very late. > > Ok, in that case, I still don't really like seeing /delete-node/ statements... and > unless there is a truly valid reason to have those, can we please just get each > node to each *.dts? > > Just to clarify, a valid scenario to have a /delete-node/ statement there would be > the following: > - Same platform, like Corsola in this case > - Four devices > - Three have one trackpad (better if expected more with the same TP) > - One has the other trackpad > > Even though I am flexible with that, I just don't see the value in deleting the > trackpad because we've got a 50-50 situation here! > > At this point IMO it's worth defining the trackpad twice + twice instead... but > if you expect to have more devices, conforming to the valid scenario that I have > described above, then okay - keep going with /delete-node/. It's not 50-50, because all the other MT8186 devices inherit the original trackpad in mt8186-corsola.dtsi. So for those devices it either means pushing it down to the next level in mt8186-corsola-steelix.dtsi, or down to the individual .dts files, of which we already have six within this series, and another two for the Voltorb devices. So that's 10 vs 2. I think that makes a very valid case for using /delete-node/ and not duplicating the device node everywhere? Maybe we'll be able to clean this mess up a bit with overlays and FIT images, but the FIT image stuff is still under discussion. ChenYu > > Also, "elan,ekth3000" is the one that was designed and tested on the Corsola > > reference design, so I think it rightfully belongs there. The Tentacruel > > SKU replaced it with another part, so the original part should be disabled, > > or in this case, deleted, because otherwise there would be a conflict. > > If you really want to document the fact that the Corsola Reference Design > suggests to use a Elan eKTH3000 part, you can always leave a comment in the > dtsi, though, that's interesting mostly only to OEMs... but anyway I'm not > against having a comment, at all. > > Cheers, > Angelo > > > > > > > Regards > > ChenYu > > > > > > > >>> + reg = <0x15>; > >>> + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; > >>> + vcc-supply = <&pp3300_s3>; > >>> + wakeup-source; > >>> + }; > >>> +}; > >> > >> > >> corsola.dtsi (here): > >> > >> &i2c2 { > >> pinctrl-names = "default"; > >> /* > >> * Trackpad pin put here to work around second source components > >> * sharing the pinmux in steelix designs. > >> */ > >> pinctrl-0 = <&i2c2_pins>, <&trackpad_pin>; > >> clock-frequency = <400000>; > >> i2c-scl-internal-delay-ns = <10000>; > >> status = "okay"; > >> > >> trackpad_i2c2_15: trackpad@15 { > >> /* > >> * Those are common properties for i2c2 trackpad on Corsola boards. > >> * The compatible string is declared in device specific devicetrees > >> */ > >> reg = <0x15>; > >> interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; > >> vcc-supply = <&pp3300_s3>; > >> wakeup-source; > >> status = "disabled"; > >> }; > >> }; > >> > >> corsola-some-device.dts: > >> > >> &trackpad_i2c2_15 { > >> compatible = "hid-over-i2c"; > >> hid-descr-addr = <0x0001>; > >> status = "okay"; > >> }; > >> > >> corsola-some-other-device.dts: > >> > >> &trackpad_i2c2_15 { > >> compatible = "elan,ekth3000"; > >> status = "okay"; > >> }; > >> > >> ....everything else looks good. > >> > >> Cheers, > >> Angelo > > >

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index e6e7592a3645..442af61b1305 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -43,6 +43,10 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262148.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi new file mode 100644 index 000000000000..7c971198fa95 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + i2c4 = &i2c4; + }; +}; + +&dsi_out { + remote-endpoint = <&ps8640_in>; +}; + +&i2c0 { + clock-frequency = <400000>; + + edp-bridge@8 { + compatible = "parade,ps8640"; + reg = <0x8>; + pinctrl-names = "default"; + pinctrl-0 = <&ps8640_pins>; + powerdown-gpios = <&pio 96 GPIO_ACTIVE_LOW>; + reset-gpios = <&pio 98 GPIO_ACTIVE_LOW>; + vdd12-supply = <&mt6366_vrf12_reg>; + vdd33-supply = <&mt6366_vcn33_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ps8640_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + ps8640_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&pp3300_disp_x>; + backlight = <&backlight_lcd0>; + + port { + panel_in: endpoint { + remote-endpoint = <&ps8640_out>; + }; + }; + }; + }; + }; +}; + +&i2c1 { + i2c-scl-internal-delay-ns = <10000>; + + touchscreen: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; + vdd-supply = <&pp3300_s3>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + clock-frequency = <400000>; + status = "okay"; + + proximity@28 { + compatible = "semtech,sx9324"; + reg = <0x28>; + #io-channel-cells = <1>; + interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sar_sensor_pins>; + vdd-supply = <&mt6366_vio18_reg>; + svdd-supply = <&mt6366_vio18_reg>; + }; +}; + +&pio { + i2c4_pins: i2c4-pins { + pins-bus { + pinmux = <PINMUX_GPIO136__FUNC_SDA4>, + <PINMUX_GPIO135__FUNC_SCL4>; + bias-disable; + drive-strength = <4>; + input-enable; + }; + }; + + ps8640_pins: ps8640-pins { + pins-pwrdn-rst { + pinmux = <PINMUX_GPIO96__FUNC_GPIO96>, + <PINMUX_GPIO98__FUNC_GPIO98>; + output-low; + }; + }; + + sar_sensor_pins: sar-sensor-pins { + pins-irq { + pinmux = <PINMUX_GPIO5__FUNC_GPIO5>; + input-enable; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts new file mode 100644 index 000000000000..9bb64353ca65 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola-krabby.dtsi" + +/ { + model = "Google Tentacool board"; + compatible = "google,tentacruel-sku327681", "google,tentacruel", "mediatek,mt8186"; + chassis-type = "laptop"; +}; + +/* Tentacool omits the pen. */ +&gpio_keys { + status = "disabled"; +}; + +/* Tentacool omits the touchscreen; nothing else is on i2c1. */ +&i2c1 { + status = "disabled"; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + CROS_STD_MAIN_KEYMAP + >; +}; + +/* Tentacool omits the touchscreen. */ +&touchscreen { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts new file mode 100644 index 000000000000..c3ae6f9616c8 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2023 Google LLC + */ + +#include "mt8186-corsola-tentacool-sku327681.dts" + +/ { + compatible = "google,tentacruel-sku327683", "google,tentacruel", "mediatek,mt8186"; +}; + +/* This variant replaces only the trackpad controller. */ +&i2c2 { + /delete-node/ trackpad@15; + + trackpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; + hid-descr-addr = <0x0001>; + vdd-supply = <&pp3300_s3>; + wakeup-source; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts new file mode 100644 index 000000000000..26d3451a5e47 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola-krabby.dtsi" + +/ { + model = "Google Tentacruel board"; + compatible = "google,tentacruel-sku262147", "google,tentacruel-sku262146", + "google,tentacruel-sku262145", "google,tentacruel-sku262144", + "google,tentacruel", "mediatek,mt8186"; + chassis-type = "convertible"; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + CROS_STD_MAIN_KEYMAP + >; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts new file mode 100644 index 000000000000..447b57b12b41 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2023 Google LLC + */ + +#include "mt8186-corsola-tentacruel-sku262144.dts" + +/ { + compatible = "google,tentacruel-sku262151", "google,tentacruel-sku262150", + "google,tentacruel-sku262149", "google,tentacruel-sku262148", + "google,tentacruel", "mediatek,mt8186"; +}; + +/* This variant replaces only the trackpad controller. */ +&i2c2 { + /delete-node/ trackpad@15; + + trackpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; + hid-descr-addr = <0x0001>; + vdd-supply = <&pp3300_s3>; + wakeup-source; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi new file mode 100644 index 000000000000..adbeb0c765d3 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi @@ -0,0 +1,1707 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2022 MediaTek Inc. + */ +/dts-v1/; +#include "mt8186.dtsi" +#include <dt-bindings/pinctrl/mt8186-pinfunc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/regulator/mediatek,mt6397-regulator.h> + +/ { + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c5 = &i2c5; + mmc0 = &mmc0; + mmc1 = &mmc1; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + /* The size should be filled in by the bootloader. */ + reg = <0 0x40000000 0 0>; + }; + + backlight_lcd0: backlight-lcd0 { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 500000>; + power-supply = <&ppvar_sys>; + enable-gpios = <&pio 152 0>; + brightness-levels = <0 1023>; + num-interpolated-steps = <1023>; + default-brightness-level = <576>; + }; + + bt-sco-codec { + compatible = "linux,bt-sco"; + #sound-dai-cells = <0>; + }; + + dmic-codec { + compatible = "dmic-codec"; + #sound-dai-cells = <0>; + num-channels = <2>; + wakeup-delay-ms = <50>; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pen_eject>; + + pen_insert: pen-insert-switch { + label = "Pen Insert"; + /* Insert = low, eject = high */ + gpios = <&pio 18 GPIO_ACTIVE_LOW>; + wakeup-event-action = <EV_ACT_DEASSERTED>; + wakeup-source; + linux,code = <SW_PEN_INSERTED>; + linux,input-type = <EV_SW>; + }; + }; + + pp1800_dpbrdg_dx: regulator-pp1800-dpbrdg-dx { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp1800_dpbrdg>; + gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + regulator-name = "pp1800_dpbrdg_dx"; + enable-active-high; + vin-supply = <&mt6366_vio18_reg>; + }; + + pp3300_disp_x: regulator-pp3300-disp-x { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&edp_panel_fixed_pins>; + gpios = <&pio 153 GPIO_ACTIVE_HIGH>; + regulator-name = "pp3300_disp_x"; + enable-active-high; + regulator-boot-on; + vin-supply = <&pp3300_z2>; + }; + + /* system wide LDO 3.3V power rail */ + pp3300_z5: regulator-pp3300-ldo-z5 { + compatible = "regulator-fixed"; + regulator-name = "pp3300_ldo_z5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ppvar_sys>; + }; + + /* separately switched 3.3V power rail */ + pp3300_s3: regulator-pp3300-s3 { + compatible = "regulator-fixed"; + regulator-name = "pp3300_s3"; + /* automatically sequenced by PMIC EXT_PMIC_EN2 */ + regulator-always-on; + regulator-boot-on; + vin-supply = <&pp3300_z2>; + }; + + /* system wide 3.3V power rail */ + pp3300_z2: regulator-pp3300-z2 { + compatible = "regulator-fixed"; + regulator-name = "pp3300_z2"; + /* EN pin tied to pp4200_z2, which is controlled by EC */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ppvar_sys>; + }; + + /* system wide 4.2V power rail */ + pp4200_z2: regulator-pp4200-z2 { + compatible = "regulator-fixed"; + regulator-name = "pp4200_z2"; + /* controlled by EC */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + vin-supply = <&ppvar_sys>; + }; + + /* system wide switching 5.0V power rail */ + pp5000_z2: regulator-pp5000-z2 { + compatible = "regulator-fixed"; + regulator-name = "pp5000_z2"; + /* controlled by EC */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&ppvar_sys>; + }; + + /* system wide semi-regulated power rail from battery or USB */ + ppvar_sys: regulator-ppvar-sys { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + adsp_dma_mem: memory@61000000 { + compatible = "shared-dma-pool"; + reg = <0 0x61000000 0 0x100000>; + no-map; + }; + + adsp_mem: memory@60000000 { + compatible = "shared-dma-pool"; + reg = <0 0x60000000 0 0xA00000>; + no-map; + }; + + scp_mem: memory@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x10a0000>; + no-map; + }; + }; + + sound: sound { + compatible = "mediatek,mt8186-mt6366-rt1019-rt5682s-sound"; + pinctrl-names = "aud_clk_mosi_off", + "aud_clk_mosi_on", + "aud_clk_miso_off", + "aud_clk_miso_on", + "aud_dat_miso_off", + "aud_dat_miso_on", + "aud_dat_mosi_off", + "aud_dat_mosi_on", + "aud_gpio_i2s0_off", + "aud_gpio_i2s0_on", + "aud_gpio_i2s1_off", + "aud_gpio_i2s1_on", + "aud_gpio_i2s2_off", + "aud_gpio_i2s2_on", + "aud_gpio_i2s3_off", + "aud_gpio_i2s3_on", + "aud_gpio_pcm_off", + "aud_gpio_pcm_on", + "aud_gpio_dmic_sec"; + pinctrl-0 = <&aud_clk_mosi_off>; + pinctrl-1 = <&aud_clk_mosi_on>; + pinctrl-2 = <&aud_clk_miso_off>; + pinctrl-3 = <&aud_clk_miso_on>; + pinctrl-4 = <&aud_dat_miso_off>; + pinctrl-5 = <&aud_dat_miso_on>; + pinctrl-6 = <&aud_dat_mosi_off>; + pinctrl-7 = <&aud_dat_mosi_on>; + pinctrl-8 = <&aud_gpio_i2s0_off>; + pinctrl-9 = <&aud_gpio_i2s0_on>; + pinctrl-10 = <&aud_gpio_i2s1_off>; + pinctrl-11 = <&aud_gpio_i2s1_on>; + pinctrl-12 = <&aud_gpio_i2s2_off>; + pinctrl-13 = <&aud_gpio_i2s2_on>; + pinctrl-14 = <&aud_gpio_i2s3_off>; + pinctrl-15 = <&aud_gpio_i2s3_on>; + pinctrl-16 = <&aud_gpio_pcm_off>; + pinctrl-17 = <&aud_gpio_pcm_on>; + pinctrl-18 = <&aud_gpio_dmic_sec>; + mediatek,adsp = <&adsp>; + mediatek,platform = <&afe>; + + playback-codecs { + sound-dai = <&it6505dptx>, <&rt1019p>; + }; + + headset-codec { + sound-dai = <&rt5682s 0>; + }; + }; + + rt1019p: speaker-codec { + compatible = "realtek,rt1019p"; + pinctrl-names = "default"; + pinctrl-0 = <&rt1019p_pins_default>; + #sound-dai-cells = <0>; + sdb-gpios = <&pio 150 GPIO_ACTIVE_HIGH>; + }; + + usb_p1_vbus: regulator-usb-p1-vbus { + compatible = "regulator-fixed"; + gpio = <&pio 148 GPIO_ACTIVE_HIGH>; + regulator-name = "vbus1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + vin-supply = <&pp5000_z2>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_pin>; + post-power-on-delay-ms = <50>; + reset-gpios = <&pio 54 GPIO_ACTIVE_LOW>; + }; + + wifi_wakeup: wifi-wakeup { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_wakeup_pin>; + + wowlan-event { + label = "Wake on WiFi"; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; +}; + +&adsp { + memory-region = <&adsp_dma_mem>, <&adsp_mem>; + status = "okay"; +}; + +&afe { + status = "okay"; +}; + +&cci { + proc-supply = <&mt6366_vproc12_reg>; +}; + +&cpu0 { + proc-supply = <&mt6366_vproc12_reg>; +}; + +&cpu1 { + proc-supply = <&mt6366_vproc12_reg>; +}; + +&cpu2 { + proc-supply = <&mt6366_vproc12_reg>; +}; + +&cpu3 { + proc-supply = <&mt6366_vproc12_reg>; +}; + +&cpu4 { + proc-supply = <&mt6366_vproc12_reg>; +}; + +&cpu5 { + proc-supply = <&mt6366_vproc12_reg>; +}; + +&cpu6 { + proc-supply = <&mt6366_vproc11_reg>; +}; + +&cpu7 { + proc-supply = <&mt6366_vproc11_reg>; +}; + +&dpi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dpi_pins_default>; + pinctrl-1 = <&dpi_pins_sleep>; + status = "okay"; +}; + +&dpi_out { + remote-endpoint = <&it6505_in>; +}; + +&dsi0 { + status = "okay"; +}; + +&gic { + mediatek,broken-save-restore-fw; +}; + +&gpu { + mali-supply = <&mt6366_vgpu_reg>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + i2c-scl-internal-delay-ns = <8000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + /* + * Trackpad pin put here to work around second source components + * sharing the pinmux in steelix designs. + */ + pinctrl-0 = <&i2c2_pins>, <&trackpad_pin>; + clock-frequency = <400000>; + i2c-scl-internal-delay-ns = <10000>; + status = "okay"; + + trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; + vcc-supply = <&pp3300_s3>; + wakeup-source; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <100000>; + status = "okay"; + + it6505dptx: dp-bridge@5c { + compatible = "ite,it6505"; + reg = <0x5c>; + interrupts-extended = <&pio 8 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&it6505_pins>; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <0>; + ovdd-supply = <&mt6366_vsim2_reg>; + pwr18-supply = <&pp1800_dpbrdg_dx>; + reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + it6505_in: endpoint { + link-frequencies = /bits/ 64 <150000000>; + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + status = "okay"; + + rt5682s: codec@1a { + compatible = "realtek,rt5682s"; + reg = <0x1a>; + interrupts-extended = <&pio 17 IRQ_TYPE_EDGE_BOTH>; + #sound-dai-cells = <1>; + AVDD-supply = <&mt6366_vio18_reg>; + DBVDD-supply = <&mt6366_vio18_reg>; + LDO1-IN-supply = <&mt6366_vio18_reg>; + MICVDD-supply = <&pp3300_z2>; + realtek,jd-src = <1>; + }; +}; + +&mfg0 { + domain-supply = <&mt6366_vsram_gpu_reg>; +}; + +&mfg1 { + domain-supply = <&mt6366_vgpu_reg>; +}; + +&mipi_tx0 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + supports-cqe; + no-sd; + no-sdio; + cap-mmc-hw-reset; + hs400-ds-delay = <0x11814>; + mediatek,hs400-ds-dly3 = <0x14>; + vmmc-supply = <&mt6366_vemc_reg>; + vqmmc-supply = <&mt6366_vio18_reg>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs", "state_eint"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_uhs>; + pinctrl-2 = <&mmc1_pins_eint>; + /delete-property/ interrupts; + interrupt-names = "msdc", "sdio_wakeup"; + interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>, + <&pio 87 IRQ_TYPE_LEVEL_LOW>; + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr104; + sd-uhs-sdr50; + keep-power-in-suspend; + wakeup-source; + cap-sdio-irq; + no-mmc; + no-sd; + non-removable; + vmmc-supply = <&pp3300_s3>; + vqmmc-supply = <&mt6366_vio18_reg>; + mmc-pwrseq = <&wifi_pwrseq>; + status = "okay"; + + bluetooth@2 { + compatible = "mediatek,mt7921s-bluetooth"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins_reset>; + reset-gpios = <&pio 155 GPIO_ACTIVE_LOW>; + }; +}; + +&nor_flash { + assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D7_D4>; + pinctrl-names = "default"; + pinctrl-0 = <&nor_pins_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <39000000>; + }; +}; + +&pio { + /* 185 lines */ + gpio-line-names = "TP", + "TP", + "TP", + "I2S0_HP_DI", + "I2S3_DP_SPKR_DO", + "SAR_INT_ODL", + "BT_WAKE_AP_ODL", + "WIFI_INT_ODL", + "DPBRDG_INT_ODL", + "EDPBRDG_INT_ODL", + "EC_AP_HPD_OD", + "TCHPAD_INT_ODL", + "TCHSCR_INT_1V8_ODL", + "EC_AP_INT_ODL", + "EC_IN_RW_ODL", + "GSC_AP_INT_ODL", + /* AP_FLASH_WP_L is crossystem ABI. Rev1 schematics call it AP_WP_ODL. */ + "AP_FLASH_WP_L", + "HP_INT_ODL", + "PEN_EJECT_OD", + "WCAM_PWDN_L", + "WCAM_RST_L", + "UCAM_SEN_EN", + "UCAM_RST_L", + "LTE_RESET_L", + "LTE_SAR_DETECT_L", + "I2S2_DP_SPK_MCK", + "I2S2_DP_SPKR_BCK", + "I2S2_DP_SPKR_LRCK", + "I2S2_DP_SPKR_DI (TP)", + "EN_PP1000_EDPBRDG", + "EN_PP1800_EDPBRDG", + "EN_PP3300_EDPBRDG", + "UART_GSC_TX_AP_RX", + "UART_AP_TX_GSC_RX", + "UART_DBGCON_TX_ADSP_RX", + "UART_ADSP_TX_DBGCON_RX", + "EN_PP1000_DPBRDG", + "TCHSCR_REPORT_DISABLE", + "EN_PP3300_DPBRDG", + "EN_PP1800_DPBRDG", + "SPI_AP_CLK_EC", + "SPI_AP_CS_EC_L", + "SPI_AP_DO_EC_DI", + "SPI_AP_DI_EC_DO", + "SPI_AP_CLK_GSC", + "SPI_AP_CS_GSC_L", + "SPI_AP_DO_GSC_DI", + "SPI_AP_DI_GSC_DO", + "UART_DBGCON_TX_SCP_RX", + "UART_SCP_TX_DBGCON_RX", + "EN_PP1200_CAM_X", + "EN_PP2800A_VCM_X", + "EN_PP2800A_UCAM_X", + "EN_PP2800A_WCAM_X", + "WLAN_MODULE_RST_L", + "EN_PP1200_UCAM_X", + "I2S1_HP_DO", + "I2S1_HP_BCK", + "I2S1_HP_LRCK", + "I2S1_HP_MCK", + "TCHSCR_RST_1V8_L", + "SPI_AP_CLK_ROM", + "SPI_AP_CS_ROM_L", + "SPI_AP_DO_ROM_DI", + "SPI_AP_DI_ROM_DO", + "NC", + "NC", + "EMMC_STRB", + "EMMC_CLK", + "EMMC_CMD", + "EMMC_RST_L", + "EMMC_DATA0", + "EMMC_DATA1", + "EMMC_DATA2", + "EMMC_DATA3", + "EMMC_DATA4", + "EMMC_DATA5", + "EMMC_DATA6", + "EMMC_DATA7", + "AP_KPCOL0", + "NC", + "NC", + "NC", + "TP", + "SDIO_CLK", + "SDIO_CMD", + "SDIO_DATA0", + "SDIO_DATA1", + "SDIO_DATA2", + "SDIO_DATA3", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "EDPBRDG_PWREN", + "BL_PWM_1V8", + "EDPBRDG_RST_L", + "MIPI_DPI_CLK", + "MIPI_DPI_VSYNC", + "MIPI_DPI_HSYNC", + "MIPI_DPI_DE", + "MIPI_DPI_D0", + "MIPI_DPI_D1", + "MIPI_DPI_D2", + "MIPI_DPI_D3", + "MIPI_DPI_D4", + "MIPI_DPI_D5", + "MIPI_DPI_D6", + "MIPI_DPI_DA7", + "MIPI_DPI_D8", + "MIPI_DPI_D9", + "MIPI_DPI_D10", + "MIPI_DPI_D11", + "PCM_BT_CLK", + "PCM_BT_SYNC", + "PCM_BT_DI", + "PCM_BT_DO", + "JTAG_TMS_TP", + "JTAG_TCK_TP", + "JTAG_TDI_TP", + "JTAG_TDO_TP", + "JTAG_TRSTN_TP", + "CLK_24M_WCAM", + "CLK_24M_UCAM", + "UCAM_DET_ODL", + "AP_I2C_EDPBRDG_SCL_1V8", + "AP_I2C_EDPBRDG_SDA_1V8", + "AP_I2C_TCHSCR_SCL_1V8", + "AP_I2C_TCHSCR_SDA_1V8", + "AP_I2C_TCHPAD_SCL_1V8", + "AP_I2C_TCHPAD_SDA_1V8", + "AP_I2C_DPBRDG_SCL_1V8", + "AP_I2C_DPBRDG_SDA_1V8", + "AP_I2C_WLAN_SCL_1V8", + "AP_I2C_WLAN_SDA_1V8", + "AP_I2C_AUD_SCL_1V8", + "AP_I2C_AUD_SDA_1V8", + "AP_I2C_TPM_SCL_1V8", + "AP_I2C_UCAM_SDA_1V8", + "AP_I2C_UCAM_SCL_1V8", + "AP_I2C_UCAM_SDA_1V8", + "AP_I2C_WCAM_SCL_1V8", + "AP_I2C_WCAM_SDA_1V8", + "SCP_I2C_SENSOR_SCL_1V8", + "SCP_I2C_SENSOR_SDA_1V8", + "AP_EC_WARM_RST_REQ", + "AP_XHCI_INIT_DONE", + "USB3_HUB_RST_L", + "EN_SPKR", + "BEEP_ON", + "AP_EDP_BKLTEN", + "EN_PP3300_DISP_X", + "EN_PP3300_SDBRDG_X", + "BT_KILL_1V8_L", + "WIFI_KILL_1V8_L", + "PWRAP_SPI0_CSN", + "PWRAP_SPI0_CK", + "PWRAP_SPI0_MO", + "PWRAP_SPI0_MI", + "SRCLKENA0", + "SRCLKENA1", + "SCP_VREQ_VAO", + "AP_RTC_CLK32K", + "AP_PMIC_WDTRST_L", + "AUD_CLK_MOSI", + "AUD_SYNC_MOSI", + "AUD_DAT_MOSI0", + "AUD_DAT_MOSI1", + "AUD_CLK_MISO", + "AUD_SYNC_MISO", + "AUD_DAT_MISO0", + "AUD_DAT_MISO1", + "NC", + "NC", + "DPBRDG_PWREN", + "DPBRDG_RST_L", + "LTE_W_DISABLE_L", + "LTE_SAR_DETECT_L", + "EN_PP3300_LTE_X", + "LTE_PWR_OFF_L", + "LTE_RESET_L", + "TP", + "TP"; + + aud_clk_mosi_off: aud-clk-mosi-off-pins { + pins-clk-sync { + pinmux = <PINMUX_GPIO166__FUNC_GPIO166>, + <PINMUX_GPIO167__FUNC_GPIO167>; + input-enable; + bias-pull-down; + }; + }; + + aud_clk_mosi_on: aud-clk-mosi-on-pins { + pins-clk-sync { + pinmux = <PINMUX_GPIO166__FUNC_AUD_CLK_MOSI>, + <PINMUX_GPIO167__FUNC_AUD_SYNC_MOSI>; + }; + }; + + aud_clk_miso_off: aud-clk-miso-off-pins { + pins-clk-sync { + pinmux = <PINMUX_GPIO170__FUNC_GPIO170>, + <PINMUX_GPIO171__FUNC_GPIO171>; + input-enable; + bias-pull-down; + }; + }; + + aud_clk_miso_on: aud-clk-miso-on-pins { + pins-clk-sync { + pinmux = <PINMUX_GPIO170__FUNC_AUD_CLK_MISO>, + <PINMUX_GPIO171__FUNC_AUD_SYNC_MISO>; + }; + }; + + aud_dat_mosi_off: aud-dat-mosi-off-pins { + pins-dat { + pinmux = <PINMUX_GPIO168__FUNC_GPIO168>, + <PINMUX_GPIO169__FUNC_GPIO169>; + input-enable; + bias-pull-down; + }; + }; + + aud_dat_mosi_on: aud-dat-mosi-on-pins { + pins-dat { + pinmux = <PINMUX_GPIO168__FUNC_AUD_DAT_MOSI0>, + <PINMUX_GPIO169__FUNC_AUD_DAT_MOSI1>; + }; + }; + + aud_dat_miso_off: aud-dat-miso-off-pins { + pins-dat { + pinmux = <PINMUX_GPIO172__FUNC_GPIO172>, + <PINMUX_GPIO173__FUNC_GPIO173>; + input-enable; + bias-pull-down; + }; + }; + + aud_dat_miso_on: aud-dat-miso-on-pins { + pins-dat { + pinmux = <PINMUX_GPIO172__FUNC_AUD_DAT_MISO0>, + <PINMUX_GPIO173__FUNC_AUD_DAT_MISO1>; + input-schmitt-enable; + bias-disable; + }; + }; + + aud_gpio_i2s0_off: aud-gpio-i2s0-off-pins { + pins-sdata { + pinmux = <PINMUX_GPIO3__FUNC_GPIO3>; + }; + }; + + aud_gpio_i2s0_on: aud-gpio-i2s0-on-pins { + pins-sdata { + pinmux = <PINMUX_GPIO3__FUNC_I2S0_DI>; + }; + }; + + aud_gpio_i2s1_off: aud-gpio-i2s-off-pins { + pins-clk-sdata { + pinmux = <PINMUX_GPIO56__FUNC_GPIO56>, + <PINMUX_GPIO57__FUNC_GPIO57>, + <PINMUX_GPIO58__FUNC_GPIO58>, + <PINMUX_GPIO59__FUNC_GPIO59>; + output-low; + }; + }; + + aud_gpio_i2s1_on: aud-gpio-i2s1-on-pins { + pins-clk-sdata { + pinmux = <PINMUX_GPIO56__FUNC_I2S1_DO>, + <PINMUX_GPIO57__FUNC_I2S1_BCK>, + <PINMUX_GPIO58__FUNC_I2S1_LRCK>, + <PINMUX_GPIO59__FUNC_I2S1_MCK>; + }; + }; + + aud_gpio_i2s2_off: aud-gpio-i2s2-off-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO26__FUNC_GPIO26>, + <PINMUX_GPIO27__FUNC_GPIO27>; + output-low; + }; + }; + + aud_gpio_i2s2_on: aud-gpio-i2s2-on-pins { + pins-clk { + pinmux = <PINMUX_GPIO26__FUNC_I2S2_BCK>, + <PINMUX_GPIO27__FUNC_I2S2_LRCK>; + drive-strength = <4>; + }; + }; + + aud_gpio_i2s3_off: aud-gpio-i2s3-off-pins { + pins-sdata { + pinmux = <PINMUX_GPIO4__FUNC_GPIO4>; + output-low; + }; + }; + + aud_gpio_i2s3_on: aud-gpio-i2s3-on-pins { + pins-sdata { + pinmux = <PINMUX_GPIO4__FUNC_I2S3_DO>; + drive-strength = <4>; + }; + }; + + aud_gpio_pcm_off: aud-gpio-pcm-off-pins { + pins-clk-sdata { + pinmux = <PINMUX_GPIO115__FUNC_GPIO115>, + <PINMUX_GPIO116__FUNC_GPIO116>, + <PINMUX_GPIO117__FUNC_GPIO117>, + <PINMUX_GPIO118__FUNC_GPIO118>; + output-low; + }; + }; + + aud_gpio_pcm_on: aud-gpio-pcm-on-pins { + pins-clk-sdata { + pinmux = <PINMUX_GPIO115__FUNC_PCM_CLK>, + <PINMUX_GPIO116__FUNC_PCM_SYNC>, + <PINMUX_GPIO117__FUNC_PCM_DI>, + <PINMUX_GPIO118__FUNC_PCM_DO>; + }; + }; + + aud_gpio_dmic_sec: aud-gpio-dmic-sec-pins { + pins { + pinmux = <PINMUX_GPIO23__FUNC_GPIO23>; + output-low; + }; + }; + + bt_pins_reset: bt-reset-pins { + pins-bt-reset { + pinmux = <PINMUX_GPIO155__FUNC_GPIO155>; + output-high; + }; + }; + + dpi_pins_sleep: dpi-sleep-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO103__FUNC_GPIO103>, + <PINMUX_GPIO104__FUNC_GPIO104>, + <PINMUX_GPIO105__FUNC_GPIO105>, + <PINMUX_GPIO106__FUNC_GPIO106>, + <PINMUX_GPIO107__FUNC_GPIO107>, + <PINMUX_GPIO108__FUNC_GPIO108>, + <PINMUX_GPIO109__FUNC_GPIO109>, + <PINMUX_GPIO110__FUNC_GPIO110>, + <PINMUX_GPIO111__FUNC_GPIO111>, + <PINMUX_GPIO112__FUNC_GPIO112>, + <PINMUX_GPIO113__FUNC_GPIO113>, + <PINMUX_GPIO114__FUNC_GPIO114>, + <PINMUX_GPIO101__FUNC_GPIO101>, + <PINMUX_GPIO100__FUNC_GPIO100>, + <PINMUX_GPIO102__FUNC_GPIO102>, + <PINMUX_GPIO99__FUNC_GPIO99>; + drive-strength = <10>; + output-low; + }; + }; + + dpi_pins_default: dpi-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO103__FUNC_DPI_DATA0>, + <PINMUX_GPIO104__FUNC_DPI_DATA1>, + <PINMUX_GPIO105__FUNC_DPI_DATA2>, + <PINMUX_GPIO106__FUNC_DPI_DATA3>, + <PINMUX_GPIO107__FUNC_DPI_DATA4>, + <PINMUX_GPIO108__FUNC_DPI_DATA5>, + <PINMUX_GPIO109__FUNC_DPI_DATA6>, + <PINMUX_GPIO110__FUNC_DPI_DATA7>, + <PINMUX_GPIO111__FUNC_DPI_DATA8>, + <PINMUX_GPIO112__FUNC_DPI_DATA9>, + <PINMUX_GPIO113__FUNC_DPI_DATA10>, + <PINMUX_GPIO114__FUNC_DPI_DATA11>, + <PINMUX_GPIO101__FUNC_DPI_HSYNC>, + <PINMUX_GPIO100__FUNC_DPI_VSYNC>, + <PINMUX_GPIO102__FUNC_DPI_DE>, + <PINMUX_GPIO99__FUNC_DPI_PCLK>; + drive-strength = <10>; + }; + }; + + ec_ap_int: cros-ec-int-pins { + pins-ec-ap-int-odl { + pinmux = <PINMUX_GPIO13__FUNC_GPIO13>; + input-enable; + }; + }; + + edp_panel_fixed_pins: edp-panel-fixed-pins { + pins-vreg-en { + pinmux = <PINMUX_GPIO153__FUNC_GPIO153>; + output-high; + }; + }; + + en_pp1800_dpbrdg: en-pp1800-dpbrdg-pins { + pins-vreg-en { + pinmux = <PINMUX_GPIO39__FUNC_GPIO39>; + output-low; + }; + }; + + gsc_int: gsc-int-pins { + pins-gsc-ap-int-odl { + pinmux = <PINMUX_GPIO15__FUNC_GPIO15>; + input-enable; + }; + }; + + i2c0_pins: i2c0-pins { + pins-bus { + pinmux = <PINMUX_GPIO128__FUNC_SDA0>, + <PINMUX_GPIO127__FUNC_SCL0>; + bias-disable; + drive-strength = <4>; + input-enable; + }; + }; + + i2c1_pins: i2c1-pins { + pins-bus { + pinmux = <PINMUX_GPIO130__FUNC_SDA1>, + <PINMUX_GPIO129__FUNC_SCL1>; + bias-disable; + drive-strength = <4>; + input-enable; + }; + }; + + i2c2_pins: i2c2-pins { + pins-bus { + pinmux = <PINMUX_GPIO132__FUNC_SDA2>, + <PINMUX_GPIO131__FUNC_SCL2>; + bias-disable; + drive-strength = <4>; + input-enable; + }; + }; + + i2c3_pins: i2c3-pins { + pins-bus { + pinmux = <PINMUX_GPIO134__FUNC_SDA3>, + <PINMUX_GPIO133__FUNC_SCL3>; + bias-disable; + drive-strength = <4>; + input-enable; + }; + }; + + i2c5_pins: i2c5-pins { + pins-bus { + pinmux = <PINMUX_GPIO138__FUNC_SDA5>, + <PINMUX_GPIO137__FUNC_SCL5>; + bias-disable; + drive-strength = <4>; + input-enable; + }; + }; + + it6505_pins: it6505-pins { + pins-hpd { + pinmux = <PINMUX_GPIO10__FUNC_GPIO10>; + input-enable; + bias-pull-up; + }; + + pins-int { + pinmux = <PINMUX_GPIO8__FUNC_GPIO8>; + input-enable; + bias-pull-up; + }; + + pins-reset { + pinmux = <PINMUX_GPIO177__FUNC_GPIO177>; + output-low; + bias-pull-up; + }; + }; + + mmc0_pins_default: mmc0-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO68__FUNC_MSDC0_CLK>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO71__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO72__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO73__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO74__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO75__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO76__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO77__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO78__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO69__FUNC_MSDC0_CMD>; + input-enable; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO70__FUNC_MSDC0_RSTB>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc0_pins_uhs: mmc0-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO68__FUNC_MSDC0_CLK>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO71__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO72__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO73__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO74__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO75__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO76__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO77__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO78__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO69__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-ds { + pinmux = <PINMUX_GPIO67__FUNC_MSDC0_DSL>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO70__FUNC_MSDC0_RSTB>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc1_pins_default: mmc1-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO84__FUNC_MSDC1_CLK>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO86__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO87__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO88__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO89__FUNC_MSDC1_DAT3>, + <PINMUX_GPIO85__FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc1_pins_uhs: mmc1-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO84__FUNC_MSDC1_CLK>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO86__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO87__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO88__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO89__FUNC_MSDC1_DAT3>, + <PINMUX_GPIO85__FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc1_pins_eint: mmc1-eint-pins { + pins-dat1 { + pinmux = <PINMUX_GPIO87__FUNC_GPIO87>; + input-enable; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + nor_pins_default: nor-default-pins { + pins-clk-dat { + pinmux = <PINMUX_GPIO63__FUNC_SPINOR_IO0>, + <PINMUX_GPIO61__FUNC_SPINOR_CK>, + <PINMUX_GPIO64__FUNC_SPINOR_IO1>; + drive-strength = <6>; + bias-pull-down; + }; + + pins-cs-dat { + pinmux = <PINMUX_GPIO62__FUNC_SPINOR_CS>, + <PINMUX_GPIO65__FUNC_SPINOR_IO2>, + <PINMUX_GPIO66__FUNC_SPINOR_IO3>; + drive-strength = <6>; + bias-pull-up; + }; + }; + + pen_eject: pen-eject-pins { + pins { + pinmux = <PINMUX_GPIO18__FUNC_GPIO18>; + input-enable; + /* External pull-up. */ + bias-disable; + }; + }; + + pwm0_pin: disp-pwm-pins { + pins { + pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM>; + output-high; + }; + }; + + rt1019p_pins_default: rt1019p-default-pins { + pins-sdb { + pinmux = <PINMUX_GPIO150__FUNC_GPIO150>; + output-low; + }; + }; + + scp_pins: scp-default-pins { + pins-scp-uart { + pinmux = <PINMUX_GPIO48__FUNC_TP_URXD2_AO>, + <PINMUX_GPIO49__FUNC_TP_UTXD2_AO>; + }; + }; + + spi1_pins: spi1-pins { + pins-bus { + pinmux = <PINMUX_GPIO40__FUNC_SPI1_CLK_A>, + <PINMUX_GPIO41__FUNC_SPI1_CSB_A>, + <PINMUX_GPIO42__FUNC_SPI1_MO_A>, + <PINMUX_GPIO43__FUNC_SPI1_MI_A>; + bias-disable; + input-enable; + }; + }; + + spi2_pins: spi2-pins { + pins-bus { + pinmux = <PINMUX_GPIO44__FUNC_SPI2_CLK_A>, + <PINMUX_GPIO45__FUNC_GPIO45>, + <PINMUX_GPIO46__FUNC_SPI2_MO_A>, + <PINMUX_GPIO47__FUNC_SPI2_MI_A>; + bias-disable; + input-enable; + }; + }; + + spmi_pins: spmi-pins { + pins-bus { + pinmux = <PINMUX_GPIO183__FUNC_SPMI_SCL>, + <PINMUX_GPIO184__FUNC_SPMI_SDA>; + }; + }; + + touchscreen_pins: touchscreen-pins { + pins-irq { + pinmux = <PINMUX_GPIO12__FUNC_GPIO12>; + input-enable; + bias-pull-up; + }; + + pins-reset { + pinmux = <PINMUX_GPIO60__FUNC_GPIO60>; + output-high; + }; + + pins-report-sw { + pinmux = <PINMUX_GPIO37__FUNC_GPIO37>; + output-low; + }; + }; + + trackpad_pin: trackpad-default-pins { + pins-int-n { + pinmux = <PINMUX_GPIO11__FUNC_GPIO11>; + input-enable; + bias-disable; /* pulled externally */ + }; + }; + + wifi_enable_pin: wifi-enable-pins { + pins-wifi-enable { + pinmux = <PINMUX_GPIO54__FUNC_GPIO54>; + }; + }; + + wifi_wakeup_pin: wifi-wakeup-pins { + pins-wifi-wakeup { + pinmux = <PINMUX_GPIO7__FUNC_GPIO7>; + input-enable; + }; + }; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + status = "okay"; +}; + +&pwrap { + pmic { + compatible = "mediatek,mt6366", "mediatek,mt6358"; + interrupt-controller; + interrupts-extended = <&pio 201 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + + mt6366codec: codec { + compatible = "mediatek,mt6366-sound", "mediatek,mt6358-sound"; + Avdd-supply = <&mt6366_vaud28_reg>; + mediatek,dmic-mode = <1>; /* one-wire */ + }; + + mt6366_regulators: regulators { + compatible = "mediatek,mt6366-regulator", "mediatek,mt6358-regulator"; + vsys-ldo1-supply = <&pp4200_z2>; + vsys-ldo2-supply = <&pp4200_z2>; + vsys-ldo3-supply = <&pp4200_z2>; + vsys-vcore-supply = <&pp4200_z2>; + vsys-vdram1-supply = <&pp4200_z2>; + vsys-vgpu-supply = <&pp4200_z2>; + vsys-vmodem-supply = <&pp4200_z2>; + vsys-vpa-supply = <&pp4200_z2>; + vsys-vproc11-supply = <&pp4200_z2>; + vsys-vproc12-supply = <&pp4200_z2>; + vsys-vs1-supply = <&pp4200_z2>; + vsys-vs2-supply = <&pp4200_z2>; + vs1-ldo1-supply = <&mt6366_vs1_reg>; + vs2-ldo1-supply = <&mt6366_vdram1_reg>; + vs2-ldo2-supply = <&mt6366_vs2_reg>; + vs2-ldo3-supply = <&mt6366_vs2_reg>; + + vcore { + regulator-name = "pp0750_dvdd_core"; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <800000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO + MT6397_BUCK_MODE_FORCE_PWM>; + regulator-always-on; + }; + + mt6366_vdram1_reg: vdram1 { + regulator-name = "pp1125_emi_vdd2"; + regulator-min-microvolt = <1125000>; + regulator-max-microvolt = <1125000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO + MT6397_BUCK_MODE_FORCE_PWM>; + regulator-always-on; + }; + + mt6366_vgpu_reg: vgpu { + /* + * Called "ppvar_dvdd_gpu" in the schematic. + * Called "ppvar_dvdd_vgpu" here to match + * regulator coupling requirements. + */ + regulator-name = "ppvar_dvdd_vgpu"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO + MT6397_BUCK_MODE_FORCE_PWM>; + regulator-coupled-with = <&mt6366_vsram_gpu_reg>; + regulator-coupled-max-spread = <10000>; + }; + + mt6366_vproc11_reg: vproc11 { + regulator-name = "ppvar_dvdd_proc_bc_mt6366"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO + MT6397_BUCK_MODE_FORCE_PWM>; + regulator-always-on; + }; + + mt6366_vproc12_reg: vproc12 { + regulator-name = "ppvar_dvdd_proc_lc"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO + MT6397_BUCK_MODE_FORCE_PWM>; + regulator-always-on; + }; + + mt6366_vs1_reg: vs1 { + regulator-name = "pp2000_vs1"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + + mt6366_vs2_reg: vs2 { + regulator-name = "pp1350_vs2"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + + va12 { + regulator-name = "pp1200_va12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <270>; + regulator-always-on; + }; + + mt6366_vaud28_reg: vaud28 { + regulator-name = "pp2800_vaud28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6366_vaux18_reg: vaux18 { + regulator-name = "pp1840_vaux18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1840000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6366_vbif28_reg: vbif28 { + regulator-name = "pp2800_vbif28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6366_vcn18_reg: vcn18 { + regulator-name = "pp1800_vcn18_x"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6366_vcn28_reg: vcn28 { + regulator-name = "pp2800_vcn28_x"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6366_vefuse_reg: vefuse { + regulator-name = "pp1800_vefuse"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6366_vfe28_reg: vfe28 { + regulator-name = "pp2800_vfe28_x"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6366_vemc_reg: vemc { + regulator-name = "pp3000_vemc"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <60>; + }; + + mt6366_vibr_reg: vibr { + regulator-name = "pp2800_vibr_x"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <60>; + }; + + mt6366_vio18_reg: vio18 { + regulator-name = "pp1800_vio18_s3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <2700>; + regulator-always-on; + }; + + mt6366_vio28_reg: vio28 { + regulator-name = "pp2800_vio28_x"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6366_vm18_reg: vm18 { + regulator-name = "pp1800_emi_vdd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1840000>; + regulator-enable-ramp-delay = <325>; + regulator-always-on; + }; + + mt6366_vmc_reg: vmc { + regulator-name = "pp3000_vmc"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <60>; + }; + + mt6366_vmddr_reg: vmddr { + regulator-name = "pm0750_emi_vmddr"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <750000>; + regulator-enable-ramp-delay = <325>; + regulator-always-on; + }; + + mt6366_vmch_reg: vmch { + regulator-name = "pp3000_vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <60>; + }; + + mt6366_vcn33_reg: vcn33 { + regulator-name = "pp3300_vcn33_x"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <270>; + }; + + vdram2 { + regulator-name = "pp0600_emi_vddq"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + regulator-enable-ramp-delay = <3300>; + regulator-always-on; + }; + + mt6366_vrf12_reg: vrf12 { + regulator-name = "pp1200_vrf12_x"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <120>; + }; + + mt6366_vrf18_reg: vrf18 { + regulator-name = "pp1800_vrf18_x"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <120>; + }; + + vsim1 { + regulator-name = "pp1860_vsim1_x"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1860000>; + regulator-enable-ramp-delay = <540>; + }; + + mt6366_vsim2_reg: vsim2 { + regulator-name = "pp2760_vsim2_x"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2760000>; + regulator-enable-ramp-delay = <540>; + }; + + mt6366_vsram_gpu_reg: vsram-gpu { + regulator-name = "pp0900_dvdd_sram_gpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + regulator-coupled-with = <&mt6366_vgpu_reg>; + regulator-coupled-max-spread = <10000>; + }; + + mt6366_vsram_others_reg: vsram-others { + regulator-name = "pp0900_dvdd_sram_core"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + + mt6366_vsram_proc11_reg: vsram-proc11 { + regulator-name = "pp0900_dvdd_sram_bc"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1120000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + + mt6366_vsram_proc12_reg: vsram-proc12 { + regulator-name = "pp0900_dvdd_sram_lc"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1120000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + + vusb { + regulator-name = "pp3070_vusb"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3070000>; + regulator-enable-ramp-delay = <270>; + regulator-always-on; + }; + + vxo22 { + regulator-name = "pp2240_vxo22"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2240000>; + regulator-enable-ramp-delay = <120>; + /* Feeds DCXO internally */ + regulator-always-on; + }; + }; + + rtc { + compatible = "mediatek,mt6366-rtc", "mediatek,mt6358-rtc"; + }; + }; +}; + +&scp { + pinctrl-names = "default"; + pinctrl-0 = <&scp_pins>; + firmware-name = "mediatek/mt8186/scp.img"; + memory-region = <&scp_mem>; + status = "okay"; + + cros-ec-rpmsg { + compatible = "google,cros-ec-rpmsg"; + mediatek,rpmsg-name = "cros-ec-rpmsg"; + }; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + mediatek,pad-select = <0>; + status = "okay"; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupts-extended = <&pio 13 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_ap_int>; + spi-max-frequency = <1000000>; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + typec { + compatible = "google,cros-ec-typec"; + #address-cells = <1>; + #size-cells = <0>; + + usb_c0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "left"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + typec_port0: endpoint { }; + }; + }; + }; + + usb_c1: connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + label = "right"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + typec_port1: endpoint { }; + }; + }; + }; + }; + }; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins>; + cs-gpios = <&pio 45 GPIO_ACTIVE_LOW>; + mediatek,pad-select = <0>; + status = "okay"; + + tpm@0 { + compatible = "google,cr50"; + reg = <0>; + interrupts-extended = <&pio 15 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&gsc_int>; + spi-max-frequency = <1000000>; + }; +}; + +&ssusb0 { + status = "okay"; +}; + +&ssusb1 { + status = "okay"; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&usb_host0 { + vbus-supply = <&pp3300_s3>; + status = "okay"; +}; + +&usb_host1 { + #address-cells = <2>; + #size-cells = <2>; + vbus-supply = <&usb_p1_vbus>; + status = "okay"; +}; + +&watchdog { + mediatek,reset-by-toprgu; +}; + +#include <arm/cros-ec-keyboard.dtsi> +#include <arm/cros-ec-sbs.dtsi>

[v4,6/9] arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool

Commit Message

Comments

Patch